patch-2.0.31 linux/Documentation/isdn/README.teles

• Lines: 74
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.0.30/linux/Documentation/isdn/README.teles
• Orig date: Sat Jun 29 10:36:22 1996

diff -u --recursive --new-file v2.0.30/linux/Documentation/isdn/README.teles linux/Documentation/isdn/README.teles
@@ -1,73 +0,0 @@
-This is my Linux hardware level driver for Teles compatible ISDN cards. It is 
-meant to be used with isdn4isdn4linux, an ISDN Link-level module for Linux written
-by Fritz Elfert.
-
-Isdn4linux can be obtained from ftp.franken.de:/pub/isdn4linux. The most recent 
-Teles driver can be found on my homepage, http://www.xs4all.nl:/~jdo.
-
-Warning
--------
-Teles4isdn4linux is a work in progress and may crash your machine. It has not 
-been certified and therefore operation on your PTT's ISDN network is probably 
-illegal.
-
-Limitations
------------
-Teles4isdn4linux only works on Euro ISDN lines and german 1TR6-lines.
-
-For the B channel transparent (HDLC) protocol and X.75 have been implemented. 
-
-Running
--------
-When you insmod isdn.o and teles.o (or with the kernel-version, during boottime)
-a few lines should appear in your syslog. Look for something like:
-
-Oct 11 16:53:30 jedi kernel: channels 2
-Oct 11 16:53:31 jedi kernel: Teles module installed
-
-Remember, that according to the new strategy for accessing Low-level-drivers
-from within isdn4linux you should also define a driver-id while doing
-insmod: Simply append teles_id=<SomeString> to the insmod-commandline. This
-string MUST NOT start with a digit or a small 'x'!
-
-At this point you can run a 'cat /dev/isdnctrl0' and view debugging 
-messages. Debugging messages are enabled with the telesctrl tool: 
-
-	teles/telesctrl <DriverId> 1 <debugging_flags>
-
-where <debugging_flags> is the integer sum of the following debugging
-options you wish enabled:
-
-	1   Link-level <--> Hardware-level communication
-	2   Top state machine 
-	4   D channel Q.931 (call control messages)
-	8   D channel Q.921 
-	16  B channel X.75
-	32  Lowlevel (irq and Layer1 stuff)
-
-For example 'teles/telesctrl MyTeles 1 63' enables full 
-debugging.
-
-Questions
----------
-Check out the FAQ (ftp.franken.de).
-
-Bugs 
-----
-If you find any please let me know. 
-
-Thanks
-------
-Special thanks to:
-
-	Erik Bos,Beat Doebeli,Fritz Elfert,	
-	Pauline Middelink,Paula de Nie, 	
-	Bernd Oerding,Stephan Seidl,Matthias Urlichs, 
-	Rogier Wolff
-
-
-
-Enjoy,
-
-Jan den Ouden   denouden@groovin.xs4all.nl
-