patch-2.3.15 linux/Documentation/isdn/INTERFACE

• Lines: 185
• Date: Wed Aug 25 15:18:07 1999
• Orig file: v2.3.14/linux/Documentation/isdn/INTERFACE
• Orig date: Thu Aug 12 09:42:33 1999

diff -u --recursive --new-file v2.3.14/linux/Documentation/isdn/INTERFACE linux/Documentation/isdn/INTERFACE
@@ -1,4 +1,4 @@
-$Id: INTERFACE,v 1.13 1999/08/11 20:30:26 armin Exp $
+$Id: INTERFACE,v 1.15 1999/08/25 20:02:13 werner Exp $
 
 Description of the Interface between Linklevel and Hardwarelevel
   of isdn4linux:
@@ -436,6 +436,57 @@
       arg         = unused.
       parm        = unused.
 
+  ISDN_CMD_PROCEED: 
+
+    With this command, the HL-driver is told to proceed with a incoming call.
+
+    Parameter:
+      driver      = driver-Id.
+      command     = ISDN_CMD_PROCEED
+      arg         = channel-number locally to the driver. (starting with 0)
+      setup.eazmsn= empty string or string send as uus1 in DSS1 with 
+                    PROCEED message
+
+  ISDN_CMD_ALERT: 
+
+    With this command, the HL-driver is told to alert a proceeding call.
+
+    Parameter:
+      driver      = driver-Id.
+      command     = ISDN_CMD_ALERT
+      arg         = channel-number locally to the driver. (starting with 0)
+      setup.eazmsn= empty string or string send as uus1 in DSS1 with 
+                    ALERT message
+
+  ISDN_CMD_REDIR: 
+
+    With this command, the HL-driver is told to redirect a call in proceeding
+    or alerting state.  
+
+    Parameter:
+      driver      = driver-Id.
+      command     = ISDN_CMD_REDIR
+      arg         = channel-number locally to the driver. (starting with 0)
+      setup.eazmsn= empty string or string send as uus1 in DSS1 protocol
+      setup.screen= screening indicator
+      setup.phone = redirected to party number
+
+  ISDN_CMD_PROT_IO:
+
+    With this call, the LL-driver invokes protocol specific features through
+    the LL.
+    The call is not implicitely bound to a connection.
+
+    Parameter:
+      driver      = driver-Id
+      command     = ISDN_CMD_PROT_IO
+      arg         = The lower 8 Bits define the adressed protocol as defined
+                    in ISDN_PTYPE..., the upper bits are used to differenciate
+                    the protocol specific CMD.  
+      
+      para        = protocol and function specific. See isdnif.h for detail.
+
+
   ISDN_CMD_FAXCMD:
 
     With this command the HL-driver receives a fax sub-command.
@@ -471,34 +522,44 @@
       parm        = unused.
 
   ISDN_STAT_ICALL:
+  ISDN_STAT_ICALLW:
 
     With this call, the HL-driver signals an incoming call to the LL.
+    If ICALLW is signalled the incoming call is a waiting call without
+    a available B-chan.
 
     Parameter:
       driver            = driver-Id
       command           = ISDN_STAT_ICALL
       arg               = channel-number, locally to the driver. (starting with 0)
-      parm.setup.phone  = Callernumber.
-      parm.setup.eazmsn = CalledNumber.
-      parm.setup.si1    = Service Indicator.
-      parm.setup.si2    = Additional Service Indicator.
-      parm.setup.plan   = octet 3 from Calling party number Information Element.
-      parm.setup.screen = octet 3a from Calling party number Information Element.
+      para.setup.phone  = Callernumber.
+      para.setup.eazmsn = CalledNumber.
+      para.setup.si1    = Service Indicator.
+      para.setup.si2    = Additional Service Indicator.
+      para.setup.plan   = octet 3 from Calling party number Information Element.
+      para.setup.screen = octet 3a from Calling party number Information Element.
 
     Return:
       0           = No device matching this call.
       1           = At least one device matching this call (RING on ttyI).
                     HL-driver may send ALERTING on the D-channel in this case.
       2           = Call will be rejected.
-      3           = Incomplete number.
-                    The CalledNumber would match, if more digits are appended.
-                    This feature is needed for Number-Blocks assigned to
-                    a line. In this case, the LL driver should assemble the
-					CalledNumber by handling keypad protocol and try again
-					later with a longer CalledNumber.
-					HL drivers serving ordinary lines should interpret this
-					return code like 0 (nothing matches).
+      3           = Incoming called party number is currently incomplete.
+                    Additional digits are required. 
+                    Used for signalling with PtP connections.
+      4	          = Call will be held in a proceeding state 
+                    (HL driver sends PROCEEDING)
+                    Used when a user space prog needs time to interpret a call
+		    para.setup.eazmsn may be filled with an uus1 message of
+		    30 octets maximum. Empty string if no uus. 
+      5           = Call will be actively deflected to another party
+                    Only available in DSS1/EURO protocol
+		    para.setup.phone must be set to destination party number
+		    para.setup.eazmsn may be filled with an uus1 message of
+		    30 octets maximum. Empty string if no uus. 
       -1          = An error happened. (Invalid parameters for example.)
+  The keypad support now is included in the dial command.	        
+
 
   ISDN_STAT_RUN:
 
@@ -654,19 +715,31 @@
       arg         = channel-number, locally to the driver. (starting with 0)
       parm.num    = ASCII string containing CAUSE-message.
 
-  ISDN_STAT_L1ERR:
+  ISDN_STAT_DISPLAY:
 
-    ***CHANGEI1.21 new status message.
-    A signal can be sent to the linklevel if an Layer1-error results in
-    packet-loss on receive or send. The field errcode of the cmd.parm
-    union describes the error more precisely.
+    With this call, the HL-driver delivers DISPLAY-messages to the LL.
+    Currently the LL does not use this messages. 
 
     Parameter:
       driver      = driver-Id
-      command     = ISDN_STAT_L1ERR
+      command     = ISDN_STAT_DISPLAY
       arg         = channel-number, locally to the driver. (starting with 0)
-      parm.errcode= ISDN_STAT_L1ERR_SEND:     Packet lost while sending.
-		    ISDN_STAT_L1ERR_RECV:     Packet lost while receiving.
+      para.display= string containing DISPLAY-message.
+
+  ISDN_STAT_PROT:
+
+    With this call, the HL-driver delivers protocol specific infos to the LL.
+    The call is not implicitely bound to a connection.
+
+    Parameter:
+      driver      = driver-Id
+      command     = ISDN_STAT_PROT
+      arg         = The lower 8 Bits define the adressed protocol as defined
+                    in ISDN_PTYPE..., the upper bits are used to differenciate
+                    the protocol specific STAT.  
+      
+      para        = protocol and function specific. See isdnif.h for detail.
+
   ISDN_STAT_DISCH:
 
     With this call, the HL-driver signals the LL to disable or enable the
@@ -683,7 +756,20 @@
       command     = ISDN_STAT_DISCH
       arg         = channel-number, locally to the driver. (starting with 0)
       parm.num[0] = 0 if channel shall be disabled, else enabled.
-    
+
+  ISDN_STAT_L1ERR:
+
+    ***CHANGEI1.21 new status message.
+    A signal can be sent to the linklevel if an Layer1-error results in
+    packet-loss on receive or send. The field errcode of the cmd.parm
+    union describes the error more precisely.
+
+    Parameter:
+      driver      = driver-Id
+      command     = ISDN_STAT_L1ERR
+      arg         = channel-number, locally to the driver. (starting with 0)
+      parm.errcode= ISDN_STAT_L1ERR_SEND:     Packet lost while sending.
+		    ISDN_STAT_L1ERR_RECV:     Packet lost while receiving.
   ISDN_STAT_FAXIND:
 
     With this call the HL-driver signals a fax sub-command to the LL.