patch-2.3.99-pre1 linux/drivers/net/wan/comxhw.h

• Lines: 114
• Date: Mon Mar 13 09:43:37 2000
• Orig file: v2.3.51/linux/drivers/net/wan/comxhw.h
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.3.51/linux/drivers/net/wan/comxhw.h linux/drivers/net/wan/comxhw.h
@@ -0,0 +1,113 @@
+/*
+ * Defines for comxhw.c
+ *
+ * Original authors:  Arpad Bakay <bakay.arpad@synergon.hu>,
+ *                    Peter Bajan <bajan.peter@synergon.hu>,
+ * Previous maintainer: Tivadar Szemethy <tiv@itc.hu>
+ * Current maintainer: Gergely Madarasz <gorgo@itc.hu>
+ *
+ * Copyright (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#define	LOCOMX_IO_EXTENT	8
+#define COMX_IO_EXTENT		4
+#define	HICOMX_IO_EXTENT	16
+
+#define COMX_MAX_TX_SIZE	1600
+#define COMX_MAX_RX_SIZE	2048
+
+#define COMX_JAIL_OFFSET	0xffff
+#define COMX_JAIL_VALUE		0xfe
+#define	COMX_MEMORY_SIZE	65536
+#define HICOMX_MEMORY_SIZE	16384
+#define COMX_MEM_MIN		0xa0000
+#define COMX_MEM_MAX		0xf0000
+
+#define	COMX_DEFAULT_IO		0x360
+#define	COMX_DEFAULT_IRQ	10
+#define	COMX_DEFAULT_MEMADDR	0xd0000
+#define	HICOMX_DEFAULT_IO	0x320
+#define	HICOMX_DEFAULT_IRQ	10
+#define	HICOMX_DEFAULT_MEMADDR	0xd0000
+#define	LOCOMX_DEFAULT_IO	0x368
+#define	LOCOMX_DEFAULT_IRQ	7
+
+#define MAX_CHANNELNO		2
+
+#define	COMX_CHANNEL_OFFSET	0x2000
+
+#define COMX_ENABLE_BOARD_IT    0x40
+#define COMX_BOARD_RESET       	0x20
+#define COMX_ENABLE_BOARD_MEM   0x10
+#define COMX_DISABLE_BOARD_MEM  0
+#define COMX_DISABLE_ALL	0x00
+
+#define HICOMX_DISABLE_ALL	0x00
+#define HICOMX_ENABLE_BOARD_MEM	0x02
+#define HICOMX_DISABLE_BOARD_MEM 0x0
+#define HICOMX_BOARD_RESET	0x01
+#define HICOMX_PRG_MEM		4
+#define HICOMX_DATA_MEM		0
+#define HICOMX_ID_BYTE		0x55
+
+#define CMX_ID_BYTE		0x31
+#define COMX_CLOCK_CONST	8000
+
+#define	LINKUP_READY		3
+
+#define	OFF_FW_L1_ID	0x01e	 /* ID bytes */
+#define OFF_FW_L2_ID	0x1006
+#define	FW_L1_ID_1	0xab
+#define FW_L1_ID_2_COMX		0xc0
+#define FW_L1_ID_2_HICOMX	0xc1
+#define	FW_L2_ID_1	0xab
+
+#define OFF_A_L2_CMD     0x130   /* command register for L2 */
+#define OFF_A_L2_CMDPAR  0x131   /* command parameter byte */
+#define OFF_A_L1_STATB   0x122   /* stat. block for L1 */
+#define OFF_A_L1_ABOREC  0x122   /* receive ABORT counter */
+#define OFF_A_L1_OVERRUN 0x123   /* receive overrun counter */
+#define OFF_A_L1_CRCREC  0x124   /* CRC error counter */
+#define OFF_A_L1_BUFFOVR 0x125   /* buffer overrun counter */
+#define OFF_A_L1_PBUFOVR 0x126   /* priority buffer overrun counter */
+#define OFF_A_L1_MODSTAT 0x127   /* current state of modem ctrl lines */
+#define OFF_A_L1_STATE   0x127   /* end of stat. block for L1 */
+#define OFF_A_L1_TXPC    0x128   /* Tx counter for the PC */
+#define OFF_A_L1_TXZ80   0x129   /* Tx counter for the Z80 */
+#define OFF_A_L1_RXPC    0x12a   /* Rx counter for the PC */
+#define OFF_A_L1_RXZ80   0x12b   /* Rx counter for the Z80 */
+#define OFF_A_L1_REPENA  0x12c   /* IT rep disable */
+#define OFF_A_L1_CHNR    0x12d   /* L1 channel logical number */
+#define OFF_A_L1_CLKINI  0x12e   /* Timer Const */
+#define OFF_A_L2_LINKUP	 0x132	 /* Linkup byte */
+#define OFF_A_L2_DAV	 0x134   /* Rx DAV */
+#define OFF_A_L2_RxBUFP  0x136	 /* Rx buff relative to membase */
+#define OFF_A_L2_TxEMPTY 0x138   /* Tx Empty */
+#define OFF_A_L2_TxBUFP  0x13a   /* Tx Buf */
+#define OFF_A_L2_NBUFFS	 0x144	 /* Number of buffers to fetch */
+
+#define OFF_A_L2_SABMREC 0x164	 /* LAPB no. of SABMs received */
+#define OFF_A_L2_SABMSENT 0x165	 /* LAPB no. of SABMs sent */
+#define OFF_A_L2_REJREC  0x166	 /* LAPB no. of REJs received */
+#define OFF_A_L2_REJSENT 0x167	 /* LAPB no. of REJs sent */
+#define OFF_A_L2_FRMRREC 0x168	 /* LAPB no. of FRMRs received */
+#define OFF_A_L2_FRMRSENT 0x169	 /* LAPB no. of FRMRs sent */
+#define OFF_A_L2_PROTERR 0x16A	 /* LAPB no. of protocol errors rec'd */
+#define OFF_A_L2_LONGREC 0x16B	 /* LAPB no. of long frames */
+#define OFF_A_L2_INVNR   0x16C	 /* LAPB no. of invalid N(R)s rec'd */
+#define OFF_A_L2_UNDEFFR 0x16D	 /* LAPB no. of invalid frames */
+
+#define	OFF_A_L2_T1	0x174	 /* T1 timer */
+#define	OFF_A_L2_ADDR	0x176	 /* DCE = 1, DTE = 3 */
+
+#define	COMX_CMD_INIT	1
+#define COMX_CMD_EXIT	2
+#define COMX_CMD_OPEN	16
+#define COMX_CMD_CLOSE	17
+