patch-2.3.99-pre1 linux/drivers/scsi/constants.c

Next file: linux/drivers/scsi/eata_dma_proc.c
Previous file: linux/drivers/scsi/atp870u.c
Back to the patch index
Back to the overall index
Lines: 625
Date: Mon Mar 13 22:15:03 2000
Orig file: v2.3.51/linux/drivers/scsi/constants.c
Orig date: Sun Feb 20 21:12:39 2000

diff -u --recursive --new-file v2.3.51/linux/drivers/scsi/constants.c linux/drivers/scsi/constants.c
@@ -158,16 +158,20 @@
 }
 
 #if (CONSTANTS & CONST_XSENSE)
-#define D 0x001  /* DIRECT ACCESS DEVICE (disk) */
-#define T 0x002  /* SEQUENTIAL ACCESS DEVICE (tape) */
-#define L 0x004  /* PRINTER DEVICE */
-#define P 0x008  /* PROCESSOR DEVICE */
-#define W 0x010  /* WRITE ONCE READ MULTIPLE DEVICE */
-#define R 0x020  /* READ ONLY (CD-ROM) DEVICE */
-#define S 0x040  /* SCANNER DEVICE */
-#define O 0x080  /* OPTICAL MEMORY DEVICE */
-#define M 0x100  /* MEDIA CHANGER DEVICE */
-#define C 0x200  /* COMMUNICATION DEVICE */
+#define D 0x0001  /* DIRECT ACCESS DEVICE (disk) */
+#define T 0x0002  /* SEQUENTIAL ACCESS DEVICE (tape) */
+#define L 0x0004  /* PRINTER DEVICE */
+#define P 0x0008  /* PROCESSOR DEVICE */
+#define W 0x0010  /* WRITE ONCE READ MULTIPLE DEVICE */
+#define R 0x0020  /* READ ONLY (CD-ROM) DEVICE */
+#define S 0x0040  /* SCANNER DEVICE */
+#define O 0x0080  /* OPTICAL MEMORY DEVICE */
+#define M 0x0100  /* MEDIA CHANGER DEVICE */
+#define C 0x0200  /* COMMUNICATION DEVICE */
+#define A 0x0400  /* ARRAY STORAGE */
+#define E 0x0800  /* ENCLOSURE SERVICES DEVICE */
+#define B 0x1000  /* SIMPLIFIED DIRECT ACCESS DEVICE */
+#define K 0x2000  /* OPTICAL CARD READER/WRITER DEVICE */
 
 struct error_info{
     unsigned char code1, code2;
@@ -192,131 +196,213 @@
 
 static struct error_info additional[] =
 {
+  {0x00,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"No additional sense information"},
   {0x00,0x01,T,"Filemark detected"},
   {0x00,0x02,T|S,"End-of-partition/medium detected"},
   {0x00,0x03,T,"Setmark detected"},
   {0x00,0x04,T|S,"Beginning-of-partition/medium detected"},
-  {0x00,0x05,T|S,"End-of-data detected"},
-  {0x00,0x06,D|T|L|P|W|R|S|O|M|C,"I/O process terminated"},
+  {0x00,0x05,T|L|S,"End-of-data detected"},
+  {0x00,0x06,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"I/O process terminated"},
   {0x00,0x11,R,"Audio play operation in progress"},
   {0x00,0x12,R,"Audio play operation paused"},
   {0x00,0x13,R,"Audio play operation successfully completed"},
   {0x00,0x14,R,"Audio play operation stopped due to error"},
   {0x00,0x15,R,"No current audio status to return"},
-  {0x01,0x00,D|W|O,"No index/sector signal"},
-  {0x02,0x00,D|W|R|O|M,"No seek complete"},
-  {0x03,0x00,D|T|L|W|S|O,"Peripheral device write fault"},
+  {0x00,0x16,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Operation in progress"},
+  {0x00,0x17,D|T|L|W|R|S|O|M|A|E|B|K,"Cleaning requested"},
+  {0x01,0x00,D|W|O|B|K,"No index/sector signal"},
+  {0x02,0x00,D|W|R|O|M|B|K,"No seek complete"},
+  {0x03,0x00,D|T|L|W|S|O|B|K,"Peripheral device write fault"},
   {0x03,0x01,T,"No write current"},
   {0x03,0x02,T,"Excessive write errors"},
-  {0x04,0x00,D|T|L|P|W|R|S|O|M|C,
-     "Logical unit not ready, cause not reportable"},
-  {0x04,0x01,D|T|L|P|W|R|S|O|M|C,
-     "Logical unit is in process of becoming ready"},
-  {0x04,0x02,D|T|L|P|W|R|S|O|M|C,
-     "Logical unit not ready, initializing command required"},
-  {0x04,0x03,D|T|L|P|W|R|S|O|M|C,
-     "Logical unit not ready, manual intervention required"},
-  {0x04,0x04,D|T|L|O,"Logical unit not ready, format in progress"},
-  {0x05,0x00,D|T|L|W|R|S|O|M|C,"Logical unit does not respond to selection"},
-  {0x06,0x00,D|W|R|O|M,"No reference position found"},
-  {0x07,0x00,D|T|L|W|R|S|O|M,"Multiple peripheral devices selected"},
-  {0x08,0x00,D|T|L|W|R|S|O|M|C,"Logical unit communication failure"},
-  {0x08,0x01,D|T|L|W|R|S|O|M|C,"Logical unit communication time-out"},
-  {0x08,0x02,D|T|L|W|R|S|O|M|C,"Logical unit communication parity error"},
-  {0x09,0x00,D|T|W|R|O,"Track following error"},
-  {0x09,0x01,W|R|O,"Tracking servo failure"},
-  {0x09,0x02,W|R|O,"Focus servo failure"},
+  {0x04,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,cause not reportable"},
+  {0x04,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit is in process of becoming ready"},
+  {0x04,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,initializing cmd. required"},
+  {0x04,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,manual intervention required"},
+  {0x04,0x04,D|T|L|R|O|B,"Logical unit not ready,format in progress"},
+  {0x04,0x05,D|T|W|O|M|C|A|B|K,"Logical unit not ready,rebuild in progress"},
+  {0x04,0x06,D|T|W|O|M|C|A|B|K,"Logical unit not ready,recalculation in progress"},
+  {0x04,0x07,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,operation in progress"},
+  {0x04,0x08,R,"Logical unit not ready,long write in progress"},
+  {0x04,0x09,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,self-test in progress"},
+  {0x05,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Logical unit does not respond to selection"},
+  {0x06,0x00,D|W|R|O|M|B|K,"No reference position found"},
+  {0x07,0x00,D|T|L|W|R|S|O|M|B|K,"Multiple peripheral devices selected"},
+  {0x08,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Logical unit communication failure"},
+  {0x08,0x01,D|T|L|W|R|S|O|M|C|A|E|B|K,"Logical unit communication time-out"},
+  {0x08,0x02,D|T|L|W|R|S|O|M|C|A|E|B|K,"Logical unit communication parity error"},
+  {0x08,0x03,D|T|R|O|M|B|K,"Logical unit communication CRC error (Ultra-DMA/32)"},
+  {0x08,0x04,D|T|L|P|W|R|S|O|C|K,"Unreachable copy target"},
+  {0x09,0x00,D|T|W|R|O|B,"Track following error"},
+  {0x09,0x01,W|R|O|K,"Tracking servo failure"},
+  {0x09,0x02,W|R|O|K,"Focus servo failure"},
   {0x09,0x03,W|R|O,"Spindle servo failure"},
-  {0x0A,0x00,D|T|L|P|W|R|S|O|M|C,"Error log overflow"},
-  {0x0C,0x00,T|S,"Write error"},
-  {0x0C,0x01,D|W|O,"Write error recovered with auto reallocation"},
-  {0x0C,0x02,D|W|O,"Write error - auto reallocation failed"},
-  {0x10,0x00,D|W|O,"Id crc or ecc error"},
-  {0x11,0x00,D|T|W|R|S|O,"Unrecovered read error"},
-  {0x11,0x01,D|T|W|S|O,"Read retries exhausted"},
-  {0x11,0x02,D|T|W|S|O,"Error too long to correct"},
-  {0x11,0x03,D|T|W|S|O,"Multiple read errors"},
-  {0x11,0x04,D|W|O,"Unrecovered read error - auto reallocate failed"},
-  {0x11,0x05,W|R|O,"L-ec uncorrectable error"},
-  {0x11,0x06,W|R|O,"Circ unrecovered error"},
-  {0x11,0x07,W|O,"Data resynchronization error"},
+  {0x09,0x04,D|T|W|R|O|B,"Head select fault"},
+  {0x0A,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Error log overflow"},
+  {0x0B,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Warning"},
+  {0x0B,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Warning - specified temperature exceeded"},
+  {0x0B,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Warning - enclosure degraded"},
+  {0x0C,0x00,T|R|S,"Write error"},
+  {0x0C,0x01,K,"Write error - recovered with auto reallocation"},
+  {0x0C,0x02,D|W|O|B|K,"Write error - auto reallocation failed"},
+  {0x0C,0x03,D|W|O|B|K,"Write error - recommend reassignment"},
+  {0x0C,0x04,D|T|W|O|B,"Compression check miscompare error"},
+  {0x0C,0x05,D|T|W|O|B,"Data expansion occurred during compression"},
+  {0x0C,0x06,D|T|W|O|B,"Block not compressible"},
+  {0x0C,0x07,R,"Write error - recovery needed"},
+  {0x0C,0x08,R,"Write error - recovery failed"},
+  {0x0C,0x09,R,"Write error - loss of streaming"},
+  {0x0C,0x0A,R,"Write error - padding blocks added"},
+  {0x10,0x00,D|W|O|B|K,"Id CRC or ECC error"},
+  {0x11,0x00,D|T|W|R|S|O|B|K,"Unrecovered read error"},
+  {0x11,0x01,D|T|W|R|S|O|B|K,"Read retries exhausted"},
+  {0x11,0x02,D|T|W|R|S|O|B|K,"Error too long to correct"},
+  {0x11,0x03,D|T|W|S|O|B|K,"Multiple read errors"},
+  {0x11,0x04,D|W|O|B|K,"Unrecovered read error - auto reallocate failed"},
+  {0x11,0x05,W|R|O|B,"L-EC uncorrectable error"},
+  {0x11,0x06,W|R|O|B,"CIRC unrecovered error"},
+  {0x11,0x07,W|O|B,"Data re-synchronization error"},
   {0x11,0x08,T,"Incomplete block read"},
   {0x11,0x09,T,"No gap found"},
-  {0x11,0x0A,D|T|O,"Miscorrected error"},
-  {0x11,0x0B,D|W|O,"Unrecovered read error - recommend reassignment"},
-  {0x11,0x0C,D|W|O,"Unrecovered read error - recommend rewrite the data"},
-  {0x12,0x00,D|W|O,"Address mark not found for id field"},
-  {0x13,0x00,D|W|O,"Address mark not found for data field"},
-  {0x14,0x00,D|T|L|W|R|S|O,"Recorded entity not found"},
-  {0x14,0x01,D|T|W|R|O,"Record not found"},
+  {0x11,0x0A,D|T|O|B|K,"Miscorrected error"},
+  {0x11,0x0B,D|W|O|B|K,"Unrecovered read error - recommend reassignment"},
+  {0x11,0x0C,D|W|O|B|K,"Unrecovered read error - recommend rewrite the data"},
+  {0x11,0x0D,D|T|W|R|O|B,"De-compression CRC error"},
+  {0x11,0x0E,D|T|W|R|O|B,"Cannot decompress using declared algorithm"},
+  {0x11,0x0F,R,"Error reading UPC/EAN number"},
+  {0x11,0x10,R,"Error reading ISRC number"},
+  {0x11,0x11,R,"Read error - loss of streaming"},
+  {0x12,0x00,D|W|O|B|K,"Address mark not found for id field"},
+  {0x13,0x00,D|W|O|B|K,"Address mark not found for data field"},
+  {0x14,0x00,D|T|L|W|R|S|O|B|K,"Recorded entity not found"},
+  {0x14,0x01,D|T|W|R|O|B|K,"Record not found"},
   {0x14,0x02,T,"Filemark or setmark not found"},
   {0x14,0x03,T,"End-of-data not found"},
   {0x14,0x04,T,"Block sequence error"},
-  {0x15,0x00,D|T|L|W|R|S|O|M,"Random positioning error"},
-  {0x15,0x01,D|T|L|W|R|S|O|M,"Mechanical positioning error"},
-  {0x15,0x02,D|T|W|R|O,"Positioning error detected by read of medium"},
-  {0x16,0x00,D|W|O,"Data synchronization mark error"},
-  {0x17,0x00,D|T|W|R|S|O,"Recovered data with no error correction applied"},
-  {0x17,0x01,D|T|W|R|S|O,"Recovered data with retries"},
-  {0x17,0x02,D|T|W|R|O,"Recovered data with positive head offset"},
-  {0x17,0x03,D|T|W|R|O,"Recovered data with negative head offset"},
-  {0x17,0x04,W|R|O,"Recovered data with retries and/or circ applied"},
-  {0x17,0x05,D|W|R|O,"Recovered data using previous sector id"},
-  {0x17,0x06,D|W|O,"Recovered data without ecc - data auto-reallocated"},
-  {0x17,0x07,D|W|O,"Recovered data without ecc - recommend reassignment"},
-  {0x18,0x00,D|T|W|R|O,"Recovered data with error correction applied"},
-  {0x18,0x01,D|W|R|O,"Recovered data with error correction and retries applied"},
-  {0x18,0x02,D|W|R|O,"Recovered data - data auto-reallocated"},
-  {0x18,0x03,R,"Recovered data with circ"},
-  {0x18,0x04,R,"Recovered data with lec"},
-  {0x18,0x05,D|W|R|O,"Recovered data - recommend reassignment"},
-  {0x19,0x00,D|O,"Defect list error"},
-  {0x19,0x01,D|O,"Defect list not available"},
-  {0x19,0x02,D|O,"Defect list error in primary list"},
-  {0x19,0x03,D|O,"Defect list error in grown list"},
-  {0x1A,0x00,D|T|L|P|W|R|S|O|M|C,"Parameter list length error"},
-  {0x1B,0x00,D|T|L|P|W|R|S|O|M|C,"Synchronous data transfer error"},
-  {0x1C,0x00,D|O,"Defect list not found"},
-  {0x1C,0x01,D|O,"Primary defect list not found"},
-  {0x1C,0x02,D|O,"Grown defect list not found"},
-  {0x1D,0x00,D|W|O,"Miscompare during verify operation"},
-  {0x1E,0x00,D|W|O,"Recovered id with ecc correction"},
-  {0x20,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid command operation code"},
-  {0x21,0x00,D|T|W|R|O|M,"Logical block address out of range"},
-  {0x21,0x01,M,"Invalid element address"},
-  {0x22,0x00,D,"Illegal function (should use 20 00, 24 00, or 26 00)"},
-  {0x24,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in cdb"},
-  {0x25,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit not supported"},
-  {0x26,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in parameter list"},
-  {0x26,0x01,D|T|L|P|W|R|S|O|M|C,"Parameter not supported"},
-  {0x26,0x02,D|T|L|P|W|R|S|O|M|C,"Parameter value invalid"},
-  {0x26,0x03,D|T|L|P|W|R|S|O|M|C,"Threshold parameters not supported"},
-  {0x27,0x00,D|T|W|O,"Write protected"},
-  {0x28,0x00,D|T|L|P|W|R|S|O|M|C,"Not ready to ready transition (medium may have changed)"},
-  {0x28,0x01,M,"Import or export element accessed"},
-  {0x29,0x00,D|T|L|P|W|R|S|O|M|C,"Power on, reset, or bus device reset occurred"},
-  {0x2A,0x00,D|T|L|W|R|S|O|M|C,"Parameters changed"},
-  {0x2A,0x01,D|T|L|W|R|S|O|M|C,"Mode parameters changed"},
-  {0x2A,0x02,D|T|L|W|R|S|O|M|C,"Log parameters changed"},
-  {0x2B,0x00,D|T|L|P|W|R|S|O|C,"Copy cannot execute since host cannot disconnect"},
-  {0x2C,0x00,D|T|L|P|W|R|S|O|M|C,"Command sequence error"},
+  {0x14,0x05,D|T|W|O|B|K,"Record not found - recommend reassignment"},
+  {0x14,0x06,D|T|W|O|B|K,"Record not found - data auto-reallocated"},
+  {0x15,0x00,D|T|L|W|R|S|O|M|B|K,"Random positioning error"},
+  {0x15,0x01,D|T|L|W|R|S|O|M|B|K,"Mechanical positioning error"},
+  {0x15,0x02,D|T|W|R|O|B|K,"Positioning error detected by read of medium"},
+  {0x16,0x00,D|W|O|B|K,"Data synchronization mark error"},
+  {0x16,0x01,D|W|O|B|K,"Data sync error - data rewritten"},
+  {0x16,0x02,D|W|O|B|K,"Data sync error - recommend rewrite"},
+  {0x16,0x03,D|W|O|B|K,"Data sync error - data auto-reallocated"},
+  {0x16,0x04,D|W|O|B|K,"Data sync error - recommend reassignment"},
+  {0x17,0x00,D|T|W|R|S|O|B|K,"Recovered data with no error correction applied"},
+  {0x17,0x01,D|T|W|R|S|O|B|K,"Recovered data with retries"},
+  {0x17,0x02,D|T|W|R|O|B|K,"Recovered data with positive head offset"},
+  {0x17,0x03,D|T|W|R|O|B|K,"Recovered data with negative head offset"},
+  {0x17,0x04,W|R|O|B,"Recovered data with retries and/or circ applied"},
+  {0x17,0x05,D|W|R|O|B|K,"Recovered data using previous sector id"},
+  {0x17,0x06,D|W|O|B|K,"Recovered data without ecc - data auto-reallocated"},
+  {0x17,0x07,D|W|R|O|B|K,"Recovered data without ecc - recommend reassignment"},
+  {0x17,0x08,D|W|R|O|B|K,"Recovered data without ecc - recommend rewrite"},
+  {0x17,0x09,D|W|R|O|B|K,"Recovered data without ecc - data rewritten"},
+  {0x18,0x00,D|T|W|R|O|B|K,"Recovered data with error correction applied"},
+  {0x18,0x01,D|W|R|O|B|K,"Recovered data with error corr. & retries applied"},
+  {0x18,0x02,D|W|R|O|B|K,"Recovered data - data auto-reallocated"},
+  {0x18,0x03,R,"Recovered data with CIRC"},
+  {0x18,0x04,R,"Recovered data with L-EC"},
+  {0x18,0x05,D|W|R|O|B|K,"Recovered data - recommend reassignment"},
+  {0x18,0x06,D|W|R|O|B|K,"Recovered data - recommend rewrite"},
+  {0x18,0x07,D|W|O|B|K,"Recovered data with ecc - data rewritten"},
+  {0x19,0x00,D|O|K,"Defect list error"},
+  {0x19,0x01,D|O|K,"Defect list not available"},
+  {0x19,0x02,D|O|K,"Defect list error in primary list"},
+  {0x19,0x03,D|O|K,"Defect list error in grown list"},
+  {0x1A,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Parameter list length error"},
+  {0x1B,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Synchronous data transfer error"},
+  {0x1C,0x00,D|O|B|K,"Defect list not found"},
+  {0x1C,0x01,D|O|B|K,"Primary defect list not found"},
+  {0x1C,0x02,D|O|B|K,"Grown defect list not found"},
+  {0x1D,0x00,D|T|W|R|O|B|K,"Miscompare during verify operation"},
+  {0x1E,0x00,D|W|O|B|K,"Recovered id with ecc correction"},
+  {0x1F,0x00,D|O|K,"Partial defect list transfer"},
+  {0x20,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid command operation code"},
+  {0x21,0x00,D|T|W|R|O|M|B|K,"Logical block address out of range"},
+  {0x21,0x01,D|T|W|R|O|M|B|K,"Invalid element address"},
+  {0x22,0x00,D,"Illegal function (use 20 00,24 00,or 26 00)"},
+  {0x24,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid field in cdb"},
+  {0x24,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"CDB decryption error"},
+  {0x25,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not supported"},
+  {0x26,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid field in parameter list"},
+  {0x26,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Parameter not supported"},
+  {0x26,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Parameter value invalid"},
+  {0x26,0x03,D|T|L|P|W|R|S|O|M|C|A|E|K,"Threshold parameters not supported"},
+  {0x26,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid release of persistent reservation"},
+  {0x26,0x05,D|T|L|P|W|R|S|O|M|C|A|B|K,"Data decryption error"},
+  {0x26,0x06,D|T|L|P|W|R|S|O|C|K,"Too many target descriptors"},
+  {0x26,0x07,D|T|L|P|W|R|S|O|C|K,"Unsupported target descriptor type code"},
+  {0x26,0x08,D|T|L|P|W|R|S|O|C|K,"Too many segment descriptors"},
+  {0x26,0x09,D|T|L|P|W|R|S|O|C|K,"Unsupported segment descriptor type code"},
+  {0x26,0x0A,D|T|L|P|W|R|S|O|C|K,"Unexpected inexact segment"},
+  {0x26,0x0B,D|T|L|P|W|R|S|O|C|K,"Inline data length exceeded"},
+  {0x26,0x0C,D|T|L|P|W|R|S|O|C|K,"Invalid operation for copy source or destination"},
+  {0x26,0x0D,D|T|L|P|W|R|S|O|C|K,"Copy segment granularity violation"},
+  {0x27,0x00,D|T|W|R|O|B|K,"Write protected"},
+  {0x27,0x01,D|T|W|R|O|B|K,"Hardware write protected"},
+  {0x27,0x02,D|T|W|R|O|B|K,"Logical unit software write protected"},
+  {0x27,0x03,T|R,"Associated write protect"},
+  {0x27,0x04,T|R,"Persistent write protect"},
+  {0x27,0x05,T|R,"Permanent write protect"},
+  {0x28,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Not ready to ready change,medium may have changed"},
+  {0x28,0x01,D|T|W|R|O|M|B,"Import or export element accessed"},
+  {0x29,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Power on,reset,or bus device reset occurred"},
+  {0x29,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Power on occurred"},
+  {0x29,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Scsi bus reset occurred"},
+  {0x29,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Bus device reset function occurred"},
+  {0x29,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Device internal reset"},
+  {0x29,0x05,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Transceiver mode changed to single-ended"},
+  {0x29,0x06,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Transceiver mode changed to lvd"},
+  {0x2A,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Parameters changed"},
+  {0x2A,0x01,D|T|L|W|R|S|O|M|C|A|E|B|K,"Mode parameters changed"},
+  {0x2A,0x02,D|T|L|W|R|S|O|M|C|A|E|K,"Log parameters changed"},
+  {0x2A,0x03,D|T|L|P|W|R|S|O|M|C|A|E|K,"Reservations preempted"},
+  {0x2A,0x04,D|T|L|P|W|R|S|O|M|C|A|E,"Reservations released"},
+  {0x2A,0x05,D|T|L|P|W|R|S|O|M|C|A|E,"Registrations preempted"},
+  {0x2B,0x00,D|T|L|P|W|R|S|O|C|K,"Copy cannot execute since host cannot disconnect"},
+  {0x2C,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Command sequence error"},
   {0x2C,0x01,S,"Too many windows specified"},
   {0x2C,0x02,S,"Invalid combination of windows specified"},
+  {0x2C,0x03,R,"Current program area is not empty"},
+  {0x2C,0x04,R,"Current program area is empty"},
+  {0x2C,0x05,B,"Illegal power condition request"},
   {0x2D,0x00,T,"Overwrite error on update in place"},
-  {0x2F,0x00,D|T|L|P|W|R|S|O|M|C,"Commands cleared by another initiator"},
-  {0x30,0x00,D|T|W|R|O|M,"Incompatible medium installed"},
-  {0x30,0x01,D|T|W|R|O,"Cannot read medium - unknown format"},
-  {0x30,0x02,D|T|W|R|O,"Cannot read medium - incompatible format"},
-  {0x30,0x03,D|T,"Cleaning cartridge installed"},
-  {0x31,0x00,D|T|W|O,"Medium format corrupted"},
-  {0x31,0x01,D|L|O,"Format command failed"},
-  {0x32,0x00,D|W|O,"No defect spare location available"},
-  {0x32,0x01,D|W|O,"Defect list update failure"},
+  {0x2F,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Commands cleared by another initiator"},
+  {0x30,0x00,D|T|W|R|O|M|B|K,"Incompatible medium installed"},
+  {0x30,0x01,D|T|W|R|O|B|K,"Cannot read medium - unknown format"},
+  {0x30,0x02,D|T|W|R|O|B|K,"Cannot read medium - incompatible format"},
+  {0x30,0x03,D|T|R|K,"Cleaning cartridge installed"},
+  {0x30,0x04,D|T|W|R|O|B|K,"Cannot write medium - unknown format"},
+  {0x30,0x05,D|T|W|R|O|B|K,"Cannot write medium - incompatible format"},
+  {0x30,0x06,D|T|W|R|O|B,"Cannot format medium - incompatible medium"},
+  {0x30,0x07,D|T|L|W|R|S|O|M|A|E|B|K,"Cleaning failure"},
+  {0x30,0x08,R,"Cannot write - application code mismatch"},
+  {0x30,0x09,R,"Current session not fixated for append"},
+  {0x31,0x00,D|T|W|R|O|B|K,"Medium format corrupted"},
+  {0x31,0x01,D|L|R|O|B,"Format command failed"},
+  {0x32,0x00,D|W|O|B|K,"No defect spare location available"},
+  {0x32,0x01,D|W|O|B|K,"Defect list update failure"},
   {0x33,0x00,T,"Tape length error"},
-  {0x36,0x00,L,"Ribbon, ink, or toner failure"},
-  {0x37,0x00,D|T|L|W|R|S|O|M|C,"Rounded parameter"},
-  {0x39,0x00,D|T|L|W|R|S|O|M|C,"Saving parameters not supported"},
-  {0x3A,0x00,D|T|L|W|R|S|O|M,"Medium not present"},
+  {0x34,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure failure"},
+  {0x35,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure services failure"},
+  {0x35,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Unsupported enclosure function"},
+  {0x35,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure services unavailable"},
+  {0x35,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure services transfer failure"},
+  {0x35,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure services transfer refused"},
+  {0x36,0x00,L,"Ribbon,ink,or toner failure"},
+  {0x37,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Rounded parameter"},
+  {0x38,0x00,B,"Event status notification"},
+  {0x38,0x02,B,"Esn - power management class event"},
+  {0x38,0x04,B,"Esn - media class event"},
+  {0x38,0x06,B,"Esn - device busy class event"},
+  {0x39,0x00,D|T|L|W|R|S|O|M|C|A|E|K,"Saving parameters not supported"},
+  {0x3A,0x00,D|T|L|W|R|S|O|M|B|K,"Medium not present"},
+  {0x3A,0x01,D|T|W|R|O|M|B|K,"Medium not present - tray closed"},
+  {0x3A,0x02,D|T|W|R|O|M|B|K,"Medium not present - tray open"},
+  {0x3A,0x03,D|T|W|R|O|M|B,"Medium not present - loadable"},
+  {0x3A,0x04,D|T|W|R|O|M|B,"Medium not present - medium auxiliary memory accessible"},
   {0x3B,0x00,T|L,"Sequential positioning error"},
   {0x3B,0x01,T,"Tape position error at beginning-of-medium"},
   {0x3B,0x02,T,"Tape position error at end-of-medium"},
@@ -329,57 +415,244 @@
   {0x3B,0x09,S,"Read past end of medium"},
   {0x3B,0x0A,S,"Read past beginning of medium"},
   {0x3B,0x0B,S,"Position past end of medium"},
-  {0x3B,0x0C,S,"Position past beginning of medium"},
-  {0x3B,0x0D,M,"Medium destination element full"},
-  {0x3B,0x0E,M,"Medium source element empty"},
-  {0x3D,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid bits in identify message"},
-  {0x3E,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit has not self-configured yet"},
-  {0x3F,0x00,D|T|L|P|W|R|S|O|M|C,"Target operating conditions have changed"},
-  {0x3F,0x01,D|T|L|P|W|R|S|O|M|C,"Microcode has been changed"},
-  {0x3F,0x02,D|T|L|P|W|R|S|O|M|C,"Changed operating definition"},
-  {0x3F,0x03,D|T|L|P|W|R|S|O|M|C,"Inquiry data has changed"},
-  {0x43,0x00,D|T|L|P|W|R|S|O|M|C,"Message error"},
-  {0x44,0x00,D|T|L|P|W|R|S|O|M|C,"Internal target failure"},
-  {0x45,0x00,D|T|L|P|W|R|S|O|M|C,"Select or reselect failure"},
-  {0x46,0x00,D|T|L|P|W|R|S|O|M|C,"Unsuccessful soft reset"},
-  {0x47,0x00,D|T|L|P|W|R|S|O|M|C,"Scsi parity error"},
-  {0x48,0x00,D|T|L|P|W|R|S|O|M|C,"Initiator detected error message received"},
-  {0x49,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid message error"},
-  {0x4A,0x00,D|T|L|P|W|R|S|O|M|C,"Command phase error"},
-  {0x4B,0x00,D|T|L|P|W|R|S|O|M|C,"Data phase error"},
-  {0x4C,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit failed self-configuration"},
-  {0x4E,0x00,D|T|L|P|W|R|S|O|M|C,"Overlapped commands attempted"},
+  {0x3B,0x0C,T|S,"Position past beginning of medium"},
+  {0x3B,0x0D,D|T|W|R|O|M|B|K,"Medium destination element full"},
+  {0x3B,0x0E,D|T|W|R|O|M|B|K,"Medium source element empty"},
+  {0x3B,0x0F,R,"End of medium reached"},
+  {0x3B,0x11,D|T|W|R|O|M|B|K,"Medium magazine not accessible"},
+  {0x3B,0x12,D|T|W|R|O|M|B|K,"Medium magazine removed"},
+  {0x3B,0x13,D|T|W|R|O|M|B|K,"Medium magazine inserted"},
+  {0x3B,0x14,D|T|W|R|O|M|B|K,"Medium magazine locked"},
+  {0x3B,0x15,D|T|W|R|O|M|B|K,"Medium magazine unlocked"},
+  {0x3B,0x16,R,"Mechanical positioning or changer error"},
+  {0x3D,0x00,D|T|L|P|W|R|S|O|M|C|A|E|K,"Invalid bits in identify message"},
+  {0x3E,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit has not self-configured yet"},
+  {0x3E,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit failure"},
+  {0x3E,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Timeout on logical unit"},
+  {0x3E,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit failed self-test"},
+  {0x3E,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit unable to update self-test log"},
+  {0x3F,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Target operating conditions have changed"},
+  {0x3F,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Microcode has been changed"},
+  {0x3F,0x02,D|T|L|P|W|R|S|O|M|C|B|K,"Changed operating definition"},
+  {0x3F,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Inquiry data has changed"},
+  {0x3F,0x04,D|T|W|R|O|M|C|A|E|B|K,"Component device attached"},
+  {0x3F,0x05,D|T|W|R|O|M|C|A|E|B|K,"Device identifier changed"},
+  {0x3F,0x06,D|T|W|R|O|M|C|A|E|B,"Redundancy group created or modified"},
+  {0x3F,0x07,D|T|W|R|O|M|C|A|E|B,"Redundancy group deleted"},
+  {0x3F,0x08,D|T|W|R|O|M|C|A|E|B,"Spare created or modified"},
+  {0x3F,0x09,D|T|W|R|O|M|C|A|E|B,"Spare deleted"},
+  {0x3F,0x0A,D|T|W|R|O|M|C|A|E|B|K,"Volume set created or modified"},
+  {0x3F,0x0B,D|T|W|R|O|M|C|A|E|B|K,"Volume set deleted"},
+  {0x3F,0x0C,D|T|W|R|O|M|C|A|E|B|K,"Volume set deassigned"},
+  {0x3F,0x0D,D|T|W|R|O|M|C|A|E|B|K,"Volume set reassigned"},
+  {0x3F,0x0E,D|T|L|P|W|R|S|O|M|C|A|E,"Reported luns data has changed"},
+  {0x3F,0x10,D|T|W|R|O|M|B,"Medium loadable"},
+  {0x3F,0x11,D|T|W|R|O|M|B,"Medium auxiliary memory accessible"},
+  {0x40,0x00,D,"Ram failure (should use 40 nn)"},
+  /*
+   * FIXME(eric) - need a way to represent wildcards here.
+   */
+  {0x40,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Diagnostic failure on component nn (80h-ffh)"},
+  {0x41,0x00,D,"Data path failure (should use 40 nn)"},
+  {0x42,0x00,D,"Power-on or self-test failure (should use 40 nn)"},
+  {0x43,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Message error"},
+  {0x44,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Internal target failure"},
+  {0x45,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Select or reselect failure"},
+  {0x46,0x00,D|T|L|P|W|R|S|O|M|C|B|K,"Unsuccessful soft reset"},
+  {0x47,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Scsi parity error"},
+  {0x47,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Data phase CRC error detected"},
+  {0x47,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Scsi parity error detected during st data phase"},
+  {0x47,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Information unit CRC error detected"},
+  {0x47,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Asynchronous information protection error detected"},
+  {0x48,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Initiator detected error message received"},
+  {0x49,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid message error"},
+  {0x4A,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Command phase error"},
+  {0x4B,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Data phase error"},
+  {0x4C,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit failed self-configuration"},
+  /*
+   * FIXME(eric) - need a way to represent wildcards here.
+   */
+  {0x4D,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Tagged overlapped commands (nn = queue tag)"},
+  {0x4E,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Overlapped commands attempted"},
   {0x50,0x00,T,"Write append error"},
   {0x50,0x01,T,"Write append position error"},
   {0x50,0x02,T,"Position error related to timing"},
-  {0x51,0x00,T|O,"Erase failure"},
+  {0x51,0x00,T|R|O,"Erase failure"},
   {0x52,0x00,T,"Cartridge fault"},
-  {0x53,0x00,D|T|L|W|R|S|O|M,"Media load or eject failed"},
+  {0x53,0x00,D|T|L|W|R|S|O|M|B|K,"Media load or eject failed"},
   {0x53,0x01,T,"Unload tape failure"},
-  {0x53,0x02,D|T|W|R|O|M,"Medium removal prevented"},
+  {0x53,0x02,D|T|W|R|O|M|B|K,"Medium removal prevented"},
   {0x54,0x00,P,"Scsi to host system interface failure"},
   {0x55,0x00,P,"System resource failure"},
+  {0x55,0x01,D|O|B|K,"System buffer full"},
+  {0x55,0x02,D|T|L|P|W|R|S|O|M|A|E|K,"Insufficient reservation resources"},
+  {0x55,0x03,D|T|L|P|W|R|S|O|M|C|A|E,"Insufficient resources"},
+  {0x55,0x04,D|T|L|P|W|R|S|O|M|A|E,"Insufficient registration resources"},
   {0x57,0x00,R,"Unable to recover table-of-contents"},
   {0x58,0x00,O,"Generation does not exist"},
   {0x59,0x00,O,"Updated block read"},
-  {0x5A,0x00,D|T|L|P|W|R|S|O|M,"Operator request or state change input (unspecified)"},
-  {0x5A,0x01,D|T|W|R|O|M,"Operator medium removal request"},
-  {0x5A,0x02,D|T|W|O,"Operator selected write protect"},
-  {0x5A,0x03,D|T|W|O,"Operator selected write permit"},
-  {0x5B,0x00,D|T|L|P|W|R|S|O|M,"Log exception"},
-  {0x5B,0x01,D|T|L|P|W|R|S|O|M,"Threshold condition met"},
-  {0x5B,0x02,D|T|L|P|W|R|S|O|M,"Log counter at maximum"},
-  {0x5B,0x03,D|T|L|P|W|R|S|O|M,"Log list codes exhausted"},
+  {0x5A,0x00,D|T|L|P|W|R|S|O|M|B|K,"Operator request or state change input"},
+  {0x5A,0x01,D|T|W|R|O|M|B|K,"Operator medium removal request"},
+  {0x5A,0x02,D|T|W|R|O|A|B|K,"Operator selected write protect"},
+  {0x5A,0x03,D|T|W|R|O|A|B|K,"Operator selected write permit"},
+  {0x5B,0x00,D|T|L|P|W|R|S|O|M|K,"Log exception"},
+  {0x5B,0x01,D|T|L|P|W|R|S|O|M|K,"Threshold condition met"},
+  {0x5B,0x02,D|T|L|P|W|R|S|O|M|K,"Log counter at maximum"},
+  {0x5B,0x03,D|T|L|P|W|R|S|O|M|K,"Log list codes exhausted"},
   {0x5C,0x00,D|O,"Rpl status change"},
   {0x5C,0x01,D|O,"Spindles synchronized"},
   {0x5C,0x02,D|O,"Spindles not synchronized"},
+  {0x5D,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Failure prediction threshold exceeded"},
+  {0x5D,0x01,R|B,"Media failure prediction threshold exceeded"},
+  {0x5D,0x02,R,"Logical unit failure prediction threshold exceeded"},
+  {0x5D,0x10,D|B,"Hardware impending failure general hard drive failure"},
+  {0x5D,0x11,D|B,"Hardware impending failure drive error rate too high"},
+  {0x5D,0x12,D|B,"Hardware impending failure data error rate too high"},
+  {0x5D,0x13,D|B,"Hardware impending failure seek error rate too high"},
+  {0x5D,0x14,D|B,"Hardware impending failure too many block reassigns"},
+  {0x5D,0x15,D|B,"Hardware impending failure access times too high"},
+  {0x5D,0x16,D|B,"Hardware impending failure start unit times too high"},
+  {0x5D,0x17,D|B,"Hardware impending failure channel parametrics"},
+  {0x5D,0x18,D|B,"Hardware impending failure controller detected"},
+  {0x5D,0x19,D|B,"Hardware impending failure throughput performance"},
+  {0x5D,0x1A,D|B,"Hardware impending failure seek time performance"},
+  {0x5D,0x1B,D|B,"Hardware impending failure spin-up retry count"},
+  {0x5D,0x1C,D|B,"Hardware impending failure drive calibration retry count"},
+  {0x5D,0x20,D|B,"Controller impending failure general hard drive failure"},
+  {0x5D,0x21,D|B,"Controller impending failure drive error rate too high"},
+  {0x5D,0x22,D|B,"Controller impending failure data error rate too high"},
+  {0x5D,0x23,D|B,"Controller impending failure seek error rate too high"},
+  {0x5D,0x24,D|B,"Controller impending failure too many block reassigns"},
+  {0x5D,0x25,D|B,"Controller impending failure access times too high"},
+  {0x5D,0x26,D|B,"Controller impending failure start unit times too high"},
+  {0x5D,0x27,D|B,"Controller impending failure channel parametrics"},
+  {0x5D,0x28,D|B,"Controller impending failure controller detected"},
+  {0x5D,0x29,D|B,"Controller impending failure throughput performance"},
+  {0x5D,0x2A,D|B,"Controller impending failure seek time performance"},
+  {0x5D,0x2B,D|B,"Controller impending failure spin-up retry count"},
+  {0x5D,0x2C,D|B,"Controller impending failure drive calibration retry count"},
+  {0x5D,0x30,D|B,"Data channel impending failure general hard drive failure"},
+  {0x5D,0x31,D|B,"Data channel impending failure drive error rate too high"},
+  {0x5D,0x32,D|B,"Data channel impending failure data error rate too high"},
+  {0x5D,0x33,D|B,"Data channel impending failure seek error rate too high"},
+  {0x5D,0x34,D|B,"Data channel impending failure too many block reassigns"},
+  {0x5D,0x35,D|B,"Data channel impending failure access times too high"},
+  {0x5D,0x36,D|B,"Data channel impending failure start unit times too high"},
+  {0x5D,0x37,D|B,"Data channel impending failure channel parametrics"},
+  {0x5D,0x38,D|B,"Data channel impending failure controller detected"},
+  {0x5D,0x39,D|B,"Data channel impending failure throughput performance"},
+  {0x5D,0x3A,D|B,"Data channel impending failure seek time performance"},
+  {0x5D,0x3B,D|B,"Data channel impending failure spin-up retry count"},
+  {0x5D,0x3C,D|B,"Data channel impending failure drive calibration retry count"},
+  {0x5D,0x40,D|B,"Servo impending failure general hard drive failure"},
+  {0x5D,0x41,D|B,"Servo impending failure drive error rate too high"},
+  {0x5D,0x42,D|B,"Servo impending failure data error rate too high"},
+  {0x5D,0x43,D|B,"Servo impending failure seek error rate too high"},
+  {0x5D,0x44,D|B,"Servo impending failure too many block reassigns"},
+  {0x5D,0x45,D|B,"Servo impending failure access times too high"},
+  {0x5D,0x46,D|B,"Servo impending failure start unit times too high"},
+  {0x5D,0x47,D|B,"Servo impending failure channel parametrics"},
+  {0x5D,0x48,D|B,"Servo impending failure controller detected"},
+  {0x5D,0x49,D|B,"Servo impending failure throughput performance"},
+  {0x5D,0x4A,D|B,"Servo impending failure seek time performance"},
+  {0x5D,0x4B,D|B,"Servo impending failure spin-up retry count"},
+  {0x5D,0x4C,D|B,"Servo impending failure drive calibration retry count"},
+  {0x5D,0x50,D|B,"Spindle impending failure general hard drive failure"},
+  {0x5D,0x51,D|B,"Spindle impending failure drive error rate too high"},
+  {0x5D,0x52,D|B,"Spindle impending failure data error rate too high"},
+  {0x5D,0x53,D|B,"Spindle impending failure seek error rate too high"},
+  {0x5D,0x54,D|B,"Spindle impending failure too many block reassigns"},
+  {0x5D,0x55,D|B,"Spindle impending failure access times too high"},
+  {0x5D,0x56,D|B,"Spindle impending failure start unit times too high"},
+  {0x5D,0x57,D|B,"Spindle impending failure channel parametrics"},
+  {0x5D,0x58,D|B,"Spindle impending failure controller detected"},
+  {0x5D,0x59,D|B,"Spindle impending failure throughput performance"},
+  {0x5D,0x5A,D|B,"Spindle impending failure seek time performance"},
+  {0x5D,0x5B,D|B,"Spindle impending failure spin-up retry count"},
+  {0x5D,0x5C,D|B,"Spindle impending failure drive calibration retry count"},
+  {0x5D,0x60,D|B,"Firmware impending failure general hard drive failure"},
+  {0x5D,0x61,D|B,"Firmware impending failure drive error rate too high"},
+  {0x5D,0x62,D|B,"Firmware impending failure data error rate too high"},
+  {0x5D,0x63,D|B,"Firmware impending failure seek error rate too high"},
+  {0x5D,0x64,D|B,"Firmware impending failure too many block reassigns"},
+  {0x5D,0x65,D|B,"Firmware impending failure access times too high"},
+  {0x5D,0x66,D|B,"Firmware impending failure start unit times too high"},
+  {0x5D,0x67,D|B,"Firmware impending failure channel parametrics"},
+  {0x5D,0x68,D|B,"Firmware impending failure controller detected"},
+  {0x5D,0x69,D|B,"Firmware impending failure throughput performance"},
+  {0x5D,0x6A,D|B,"Firmware impending failure seek time performance"},
+  {0x5D,0x6B,D|B,"Firmware impending failure spin-up retry count"},
+  {0x5D,0x6C,D|B,"Firmware impending failure drive calibration retry count"},
+  {0x5D,0xFF,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Failure prediction threshold exceeded (false)"},
+  {0x5E,0x00,D|T|L|P|W|R|S|O|C|A|K,"Low power condition on"},
+  {0x5E,0x01,D|T|L|P|W|R|S|O|C|A|K,"Idle condition activated by timer"},
+  {0x5E,0x02,D|T|L|P|W|R|S|O|C|A|K,"Standby condition activated by timer"},
+  {0x5E,0x03,D|T|L|P|W|R|S|O|C|A|K,"Idle condition activated by command"},
+  {0x5E,0x04,D|T|L|P|W|R|S|O|C|A|K,"Standby condition activated by command"},
+  {0x5E,0x41,B,"Power state change to active"},
+  {0x5E,0x42,B,"Power state change to idle"},
+  {0x5E,0x43,B,"Power state change to standby"},
+  {0x5E,0x45,B,"Power state change to sleep"},
+  {0x5E,0x47,B|K,"Power state change to device control"},
   {0x60,0x00,S,"Lamp failure"},
   {0x61,0x00,S,"Video acquisition error"},
   {0x61,0x01,S,"Unable to acquire video"},
   {0x61,0x02,S,"Out of focus"},
   {0x62,0x00,S,"Scan head positioning error"},
   {0x63,0x00,R,"End of user area encountered on this track"},
+  {0x63,0x01,R,"Packet does not fit in available space"},
   {0x64,0x00,R,"Illegal mode for this track"},
+  {0x64,0x01,R,"Invalid packet size"},
+  {0x65,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Voltage fault"},
+  {0x66,0x00,S,"Automatic document feeder cover up"},
+  {0x66,0x01,S,"Automatic document feeder lift up"},
+  {0x66,0x02,S,"Document jam in automatic document feeder"},
+  {0x66,0x03,S,"Document miss feed automatic in document feeder"},
+  {0x67,0x00,A,"Configuration failure"},
+  {0x67,0x01,A,"Configuration of incapable logical units failed"},
+  {0x67,0x02,A,"Add logical unit failed"},
+  {0x67,0x03,A,"Modification of logical unit failed"},
+  {0x67,0x04,A,"Exchange of logical unit failed"},
+  {0x67,0x05,A,"Remove of logical unit failed"},
+  {0x67,0x06,A,"Attachment of logical unit failed"},
+  {0x67,0x07,A,"Creation of logical unit failed"},
+  {0x67,0x08,A,"Assign failure occurred"},
+  {0x67,0x09,A,"Multiply assigned logical unit"},
+  {0x68,0x00,A,"Logical unit not configured"},
+  {0x69,0x00,A,"Data loss on logical unit"},
+  {0x69,0x01,A,"Multiple logical unit failures"},
+  {0x69,0x02,A,"Parity/data mismatch"},
+  {0x6A,0x00,A,"Informational,refer to log"},
+  {0x6B,0x00,A,"State change has occurred"},
+  {0x6B,0x01,A,"Redundancy level got better"},
+  {0x6B,0x02,A,"Redundancy level got worse"},
+  {0x6C,0x00,A,"Rebuild failure occurred"},
+  {0x6D,0x00,A,"Recalculate failure occurred"},
+  {0x6E,0x00,A,"Command to logical unit failed"},
+  {0x6F,0x00,R,"Copy protection key exchange failure - authentication failure"},
+  {0x6F,0x01,R,"Copy protection key exchange failure - key not present"},
+  {0x6F,0x02,R,"Copy protection key exchange failure - key not established"},
+  {0x6F,0x03,R,"Read of scrambled sector without authentication"},
+  {0x6F,0x04,R,"Media region code is mismatched to logical unit region"},
+  {0x6F,0x05,R,"Drive region must be permanent/region reset count error"},
+  /*
+   * FIXME(eric) - need a way to represent wildcards here.
+   */
+  {0x70,0x00,T,"Decompression exception short algorithm id of nn"},
+  {0x71,0x00,T,"Decompression exception long algorithm id"},
+  {0x72,0x00,R,"Session fixation error"},
+  {0x72,0x01,R,"Session fixation error writing lead-in"},
+  {0x72,0x02,R,"Session fixation error writing lead-out"},
+  {0x72,0x03,R,"Session fixation error - incomplete track in session"},
+  {0x72,0x04,R,"Empty or partially written reserved track"},
+  {0x72,0x05,R,"No more track reservations allowed"},
+  {0x73,0x00,R,"Cd control error"},
+  {0x73,0x01,R,"Power calibration area almost full"},
+  {0x73,0x02,R,"Power calibration area is full"},
+  {0x73,0x03,R,"Power calibration area error"},
+  {0x73,0x04,R,"Program memory area update failure"},
+  {0x73,0x05,R,"Program memory area is full"},
+  {0x73,0x06,R,"RMA/PMA is full"},
   {0, 0, 0, NULL}
 };
 #endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)