patch-2.3.99-pre6 linux/drivers/net/wan/lmc/lmc_ioctl.h

• Lines: 258
• Date: Fri Apr 21 16:08:45 2000
• Orig file: v2.3.99-pre5/linux/drivers/net/wan/lmc/lmc_ioctl.h
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.3.99-pre5/linux/drivers/net/wan/lmc/lmc_ioctl.h linux/drivers/net/wan/lmc/lmc_ioctl.h
@@ -0,0 +1,257 @@
+#ifndef _LMC_IOCTL_H_
+#define _LMC_IOCTL_H_
+/*	$Id: lmc_ioctl.h,v 1.15 2000/04/06 12:16:43 asj Exp $	*/
+
+ /*
+  * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
+  * All rights reserved.  www.lanmedia.com
+  *
+  * This code is written by:
+  * Andrew Stanley-Jones (asj@cban.com)
+  * Rob Braun (bbraun@vix.com),
+  * Michael Graff (explorer@vix.com) and
+  * Matt Thomas (matt@3am-software.com).
+  *
+  * This software may be used and distributed according to the terms
+  * of the GNU Public License version 2, incorporated herein by reference.
+  */
+
+#define LMCIOCGINFO             SIOCDEVPRIVATE+3 /* get current state */
+#define LMCIOCSINFO             SIOCDEVPRIVATE+4 /* set state to user values */
+#define LMCIOCGETLMCSTATS       SIOCDEVPRIVATE+5
+#define LMCIOCCLEARLMCSTATS     SIOCDEVPRIVATE+6
+#define LMCIOCDUMPEVENTLOG      SIOCDEVPRIVATE+7
+#define LMCIOCGETXINFO          SIOCDEVPRIVATE+8
+#define LMCIOCSETCIRCUIT        SIOCDEVPRIVATE+9
+#define LMCIOCUNUSEDATM         SIOCDEVPRIVATE+10
+#define LMCIOCRESET             SIOCDEVPRIVATE+11
+#define LMCIOCT1CONTROL         SIOCDEVPRIVATE+12
+#define LMCIOCIFTYPE            SIOCDEVPRIVATE+13
+#define LMCIOCXILINX            SIOCDEVPRIVATE+14
+
+#define LMC_CARDTYPE_UNKNOWN            -1
+#define LMC_CARDTYPE_HSSI               1       /* probed card is a HSSI card */
+#define LMC_CARDTYPE_DS3                2       /* probed card is a DS3 card */
+#define LMC_CARDTYPE_SSI                3       /* probed card is a SSI card */
+#define LMC_CARDTYPE_T1                 4       /* probed card is a T1 card */
+
+#define LMC_CTL_CARDTYPE_LMC5200	0	/* HSSI */
+#define LMC_CTL_CARDTYPE_LMC5245	1	/* DS3 */
+#define LMC_CTL_CARDTYPE_LMC1000	2	/* SSI, V.35 */
+#define LMC_CTL_CARDTYPE_LMC1200        3       /* DS1 */
+
+#define LMC_CTL_OFF			0	/* generic OFF value */
+#define LMC_CTL_ON			1	/* generic ON value */
+
+#define LMC_CTL_CLOCK_SOURCE_EXT	0	/* clock off line */
+#define LMC_CTL_CLOCK_SOURCE_INT	1	/* internal clock */
+
+#define LMC_CTL_CRC_LENGTH_16		16
+#define LMC_CTL_CRC_LENGTH_32		32
+#define LMC_CTL_CRC_BYTESIZE_2          2
+#define LMC_CTL_CRC_BYTESIZE_4          4
+
+
+#define LMC_CTL_CABLE_LENGTH_LT_100FT	0	/* DS3 cable < 100 feet */
+#define LMC_CTL_CABLE_LENGTH_GT_100FT	1	/* DS3 cable >= 100 feet */
+
+#define LMC_CTL_CIRCUIT_TYPE_E1 0
+#define LMC_CTL_CIRCUIT_TYPE_T1 1
+
+/*
+ * IFTYPE defines
+ */
+#define LMC_PPP         1               /* use sppp interface */
+#define LMC_NET         2               /* use direct net interface */
+#define LMC_RAW         3               /* use direct net interface */
+
+/*
+ * These are not in the least IOCTL related, but I want them common.
+ */
+/*
+ * assignments for the GPIO register on the DEC chip (common)
+ */
+#define LMC_GEP_INIT		0x01 /* 0: */
+#define LMC_GEP_RESET		0x02 /* 1: */
+#define LMC_GEP_MODE		0x10 /* 4: */
+#define LMC_GEP_DP		0x20 /* 5: */
+#define LMC_GEP_DATA		0x40 /* 6: serial out */
+#define LMC_GEP_CLK	        0x80 /* 7: serial clock */
+
+/*
+ * HSSI GPIO assignments
+ */
+#define LMC_GEP_HSSI_ST		0x04 /* 2: receive timing sense (deprecated) */
+#define LMC_GEP_HSSI_CLOCK	0x08 /* 3: clock source */
+
+/*
+ * T1 GPIO assignments
+ */
+#define LMC_GEP_SSI_GENERATOR	0x04 /* 2: enable prog freq gen serial i/f */
+#define LMC_GEP_SSI_TXCLOCK	0x08 /* 3: provide clock on TXCLOCK output */
+
+/*
+ * Common MII16 bits
+ */
+#define LMC_MII16_LED0         0x0080
+#define LMC_MII16_LED1         0x0100
+#define LMC_MII16_LED2         0x0200
+#define LMC_MII16_LED3         0x0400  /* Error, and the red one */
+#define LMC_MII16_LED_ALL      0x0780  /* LED bit mask */
+#define LMC_MII16_FIFO_RESET   0x0800
+
+/*
+ * definitions for HSSI
+ */
+#define LMC_MII16_HSSI_TA      0x0001
+#define LMC_MII16_HSSI_CA      0x0002
+#define LMC_MII16_HSSI_LA      0x0004
+#define LMC_MII16_HSSI_LB      0x0008
+#define LMC_MII16_HSSI_LC      0x0010
+#define LMC_MII16_HSSI_TM      0x0020
+#define LMC_MII16_HSSI_CRC     0x0040
+
+/*
+ * assignments for the MII register 16 (DS3)
+ */
+#define LMC_MII16_DS3_ZERO	0x0001
+#define LMC_MII16_DS3_TRLBK	0x0002
+#define LMC_MII16_DS3_LNLBK	0x0004
+#define LMC_MII16_DS3_RAIS	0x0008
+#define LMC_MII16_DS3_TAIS	0x0010
+#define LMC_MII16_DS3_BIST	0x0020
+#define LMC_MII16_DS3_DLOS	0x0040
+#define LMC_MII16_DS3_CRC	0x1000
+#define LMC_MII16_DS3_SCRAM	0x2000
+#define LMC_MII16_DS3_SCRAM_LARS 0x4000
+
+/* Note: 2 pairs of LEDs where swapped by mistake
+ * in Xilinx code for DS3 & DS1 adapters */
+#define LMC_DS3_LED0    0x0100          /* bit 08  yellow */
+#define LMC_DS3_LED1    0x0080          /* bit 07  blue   */
+#define LMC_DS3_LED2    0x0400          /* bit 10  green  */
+#define LMC_DS3_LED3    0x0200          /* bit 09  red    */
+
+/*
+ * framer register 0 and 7 (7 is latched and reset on read)
+ */
+#define LMC_FRAMER_REG0_DLOS            0x80    /* digital loss of service */
+#define LMC_FRAMER_REG0_OOFS            0x40    /* out of frame sync */
+#define LMC_FRAMER_REG0_AIS             0x20    /* alarm indication signal */
+#define LMC_FRAMER_REG0_CIS             0x10    /* channel idle */
+#define LMC_FRAMER_REG0_LOC             0x08    /* loss of clock */
+
+/*
+ * Framer register 9 contains the blue alarm signal
+ */
+#define LMC_FRAMER_REG9_RBLUE          0x02     /* Blue alarm failure */
+
+/*
+ * Framer register 0x10 contains xbit error
+ */
+#define LMC_FRAMER_REG10_XBIT          0x01     /* X bit error alarm failure */
+
+/*
+ * And SSI, LMC1000
+ */
+#define LMC_MII16_SSI_DTR	0x0001	/* DTR output RW */
+#define LMC_MII16_SSI_DSR	0x0002	/* DSR input RO */
+#define LMC_MII16_SSI_RTS	0x0004	/* RTS output RW */
+#define LMC_MII16_SSI_CTS	0x0008	/* CTS input RO */
+#define LMC_MII16_SSI_DCD	0x0010	/* DCD input RO */
+#define LMC_MII16_SSI_RI		0x0020	/* RI input RO */
+#define LMC_MII16_SSI_CRC                0x1000  /* CRC select - RW */
+
+/*
+ * bits 0x0080 through 0x0800 are generic, and described
+ * above with LMC_MII16_LED[0123] _LED_ALL, and _FIFO_RESET
+ */
+#define LMC_MII16_SSI_LL		0x1000	/* LL output RW */
+#define LMC_MII16_SSI_RL		0x2000	/* RL output RW */
+#define LMC_MII16_SSI_TM		0x4000	/* TM input RO */
+#define LMC_MII16_SSI_LOOP	0x8000	/* loopback enable RW */
+
+/*
+ * Some of the MII16 bits are mirrored in the MII17 register as well,
+ * but let's keep thing seperate for now, and get only the cable from
+ * the MII17.
+ */
+#define LMC_MII17_SSI_CABLE_MASK	0x0038	/* mask to extract the cable type */
+#define LMC_MII17_SSI_CABLE_SHIFT 3	/* shift to extract the cable type */
+
+/*
+ * And T1, LMC1200
+ */
+#define LMC_MII16_T1_UNUSED1    0x0003
+#define LMC_MII16_T1_XOE                0x0004
+#define LMC_MII16_T1_RST                0x0008  /* T1 chip reset - RW */
+#define LMC_MII16_T1_Z                  0x0010  /* output impedance T1=1, E1=0 output - RW */
+#define LMC_MII16_T1_INTR               0x0020  /* interrupt from 8370 - RO */
+#define LMC_MII16_T1_ONESEC             0x0040  /* one second square wave - ro */
+
+#define LMC_MII16_T1_LED0               0x0100
+#define LMC_MII16_T1_LED1               0x0080
+#define LMC_MII16_T1_LED2               0x0400
+#define LMC_MII16_T1_LED3               0x0200
+#define LMC_MII16_T1_FIFO_RESET 0x0800
+
+#define LMC_MII16_T1_CRC                0x1000  /* CRC select - RW */
+#define LMC_MII16_T1_UNUSED2    0xe000
+
+
+/* 8370 framer registers  */
+
+#define T1FRAMER_ALARM1_STATUS  0x47
+#define T1FRAMER_ALARM2_STATUS  0x48
+#define T1FRAMER_FERR_LSB               0x50
+#define T1FRAMER_FERR_MSB               0x51    /* framing bit error counter */
+#define T1FRAMER_LCV_LSB                0x54
+#define T1FRAMER_LCV_MSB                0x55    /* line code violation counter */
+#define T1FRAMER_AERR                   0x5A
+
+/* mask for the above AERR register */
+#define T1FRAMER_LOF_MASK               (0x0f0) /* receive loss of frame */
+#define T1FRAMER_COFA_MASK              (0x0c0) /* change of frame alignment */
+#define T1FRAMER_SEF_MASK               (0x03)  /* severely errored frame  */
+
+/* 8370 framer register ALM1 (0x47) values
+ * used to determine link status
+ */
+
+#define T1F_SIGFRZ      0x01    /* signaling freeze */
+#define T1F_RLOF        0x02    /* receive loss of frame alignment */
+#define T1F_RLOS        0x04    /* receive loss of signal */
+#define T1F_RALOS       0x08    /* receive analog loss of signal or RCKI loss of clock */
+#define T1F_RAIS        0x10    /* receive alarm indication signal */
+#define T1F_UNUSED      0x20
+#define T1F_RYEL        0x40    /* receive yellow alarm */
+#define T1F_RMYEL       0x80    /* receive multiframe yellow alarm */
+
+#define LMC_T1F_WRITE       0
+#define LMC_T1F_READ        1
+
+typedef struct lmc_st1f_control {
+  int command;
+  int address;
+  int value;
+  char *data;
+} lmc_t1f_control;
+
+enum lmc_xilinx_c {
+    lmc_xilinx_reset = 1,
+    lmc_xilinx_load_prom = 2,
+    lmc_xilinx_load = 3
+};
+
+struct lmc_xilinx_control {
+    enum lmc_xilinx_c command;
+    int len;
+    char *data;
+};
+
+/* ------------------ end T1 defs ------------------- */
+
+#define LMC_MII_LedMask                 0x0780
+#define LMC_MII_LedBitPos               7
+
+#endif