oauth A. Tulshibagwale Internet-Draft SGNL Intended status: Informational G. Fletcher Expires: 4 January 2025 Capital One P. Kasselman Microsoft 3 July 2024 Transaction Tokens draft-ietf-oauth-transaction-tokens-03 Abstract Transaction Tokens (Txn-Tokens) enable workloads in a trusted domain to ensure that user identity and authorization context of an external programmatic request, such as an API invocation, are preserved and available to all workloads that are invoked as part of processing such a request. Txn-Tokens also enable workloads within the trusted domain to optionally immutably assert to downstream workloads that they were invoked in the call chain of the request. About This Document This note is to be removed before publishing as an RFC. The latest revision of this draft can be found at https://drafts.oauth.net/oauth-transaction-tokens/draft-ietf-oauth- transaction-tokens.html. Status information for this document may be found at https://datatracker.ietf.org/doc/draft-ietf-oauth- transaction-tokens/. Source for this draft and an issue tracker can be found at https://github.com/oauth-wg/oauth-transaction-tokens. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Tulshibagwale, et al. Expires 4 January 2025 [Page 1] Internet-Draft Txn-Tokens July 2024 Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 4 January 2025. Copyright Notice Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1. What are Transaction Tokens? . . . . . . . . . . . . . . 4 2.2. Creating Txn-Tokens . . . . . . . . . . . . . . . . . . . 4 2.2.1. Initial Creation . . . . . . . . . . . . . . . . . . 4 2.2.2. Replacement Txn-Tokens . . . . . . . . . . . . . . . 5 2.3. Txn-Token Lifetime . . . . . . . . . . . . . . . . . . . 5 2.4. Benefits of Txn-Tokens . . . . . . . . . . . . . . . . . 5 2.5. Txn-Token Issuance and Usage Flows . . . . . . . . . . . 6 2.5.1. Basic Flow . . . . . . . . . . . . . . . . . . . . . 6 2.5.2. Replacement Txn-Token Flow . . . . . . . . . . . . . 7 3. Notational Conventions . . . . . . . . . . . . . . . . . . . 9 4. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 9 5. Txn-Token Format . . . . . . . . . . . . . . . . . . . . . . 10 5.1. JWT Header . . . . . . . . . . . . . . . . . . . . . . . 10 5.2. JWT Body Claims . . . . . . . . . . . . . . . . . . . . . 10 5.2.1. Purpose claim . . . . . . . . . . . . . . . . . . . . 11 5.2.2. Requester Context . . . . . . . . . . . . . . . . . . 11 5.2.3. Authorizaiton Details . . . . . . . . . . . . . . . . 12 5.2.4. Example . . . . . . . . . . . . . . . . . . . . . . . 13 6. Txn-Token Service . . . . . . . . . . . . . . . . . . . . . . 14 7. Requesting Txn-Tokens . . . . . . . . . . . . . . . . . . . . 14 7.1. Txn-Token Request . . . . . . . . . . . . . . . . . . . . 15 7.2. Subject Token Types . . . . . . . . . . . . . . . . . . . 16 7.2.1. Self-Signed Subject Token Type . . . . . . . . . . . 16 Tulshibagwale, et al. Expires 4 January 2025 [Page 2] Internet-Draft Txn-Tokens July 2024 7.3. Txn-Token Request Processing . . . . . . . . . . . . . . 17 7.4. Txn-Token Response . . . . . . . . . . . . . . . . . . . 18 7.5. Creating Replacement Txn-Tokens . . . . . . . . . . . . . 19 7.5.1. Txn-Token Service Responsibilities . . . . . . . . . 19 7.5.2. Replacement Txn-Token Request . . . . . . . . . . . . 20 7.5.3. Replacement Txn-Token Response . . . . . . . . . . . 20 7.6. Mutual Authentication of the Txn-Token Request . . . . . 20 8. Using Txn-Tokens . . . . . . . . . . . . . . . . . . . . . . 20 8.1. Txn-Token HTTP Header . . . . . . . . . . . . . . . . . . 21 9. Security Considerations . . . . . . . . . . . . . . . . . . . 21 9.1. Txn-Token Lifetime . . . . . . . . . . . . . . . . . . . 21 9.2. Access Tokens . . . . . . . . . . . . . . . . . . . . . . 21 9.3. Client Authentication . . . . . . . . . . . . . . . . . . 22 9.4. Replacement Tokens . . . . . . . . . . . . . . . . . . . 22 9.5. Scope and Purpose processing . . . . . . . . . . . . . . 22 10. Privacy Considerations . . . . . . . . . . . . . . . . . . . 22 10.1. Obfuscation of Personal Information . . . . . . . . . . 22 10.2. Logging . . . . . . . . . . . . . . . . . . . . . . . . 22 11. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 23 11.1. OAuth URI Subregistry Contents . . . . . . . . . . . . . 23 11.2. JWT Claims Registry Contents . . . . . . . . . . . . . . 23 11.3. IANA Media Type Registration Contents . . . . . . . . . 24 11.4. HTTP Header . . . . . . . . . . . . . . . . . . . . . . 25 12. References . . . . . . . . . . . . . . . . . . . . . . . . . 25 12.1. Normative References . . . . . . . . . . . . . . . . . . 25 12.2. Informative References . . . . . . . . . . . . . . . . . 27 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 27 Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 28 1. Introduction Modern computing architectures often use multiple independently running components called workloads. In many cases, external invocations through externally visible interfaces such as APIs result in a number of internal workloads being invoked in order to process the external invocation. These workloads often run in virtually or physically isolated networks. These networks and the workloads running within their perimeter may be compromised by attackers through software supply chain, privileged user compromise or other attacks. Workloads compromised through external attacks, malicious insiders or software errors can cause any or all of the following unauthorized actions: * Invocations of workloads in the network without any external invocation being present * Arbitrary user impersonation Tulshibagwale, et al. Expires 4 January 2025 [Page 3] Internet-Draft Txn-Tokens July 2024 * Parameter modification or augmentation The results of these actions are unauthorized access to resources. 2. Overview Transaction Tokens (Txn-Token) are a means to mitigate damage from such attacks or spurious invocations. A valid Txn-Token indicates a valid external invocation. They ensure that the identity of the user or a workload that made the external request is preserved throughout subsequent workload invocations. They preserve any context such as: * Parameters of the original call * Environmental factors, such as IP address of the original caller * Any computed context that needs to be preserved in the call chain. This includes information that was not in the original request to the external endpoint. Cryptographically protected Txn-Tokens ensure that downstream workloads cannot make unauthorized modifications to such information, and cannot make spurious calls without the presence of an external trigger. 2.1. What are Transaction Tokens? Txn-Tokens are short-lived, signed JWTs [RFC7519] that assert the identity of a user or a workload and assert an authorization context. The authorization context provides information expected to remain constant during the execution of a call chain as it passes through multiple workloads. 2.2. Creating Txn-Tokens 2.2.1. Initial Creation Txn-Tokens are typically created when a workload is invoked using an endpoint that is externally visible, and is authorized using a separate mechanism, such as an OAuth [RFC6749] access token or an OpenID Connect [OpenIdConnect] ID token. This workload then performs an OAuth 2.0 Token Exchange [RFC8693] to obtain a Txn-Token. To do this, it invokes a special Token Service (the Txn-Token Service) and provides context that is sufficient for it to generate a Txn-Token. This context MAY include: * The external authorization token (e.g., the OAuth access token) Tulshibagwale, et al. Expires 4 January 2025 [Page 4] Internet-Draft Txn-Tokens July 2024 * Parameters that are required to be bound for the duration of this call * Additional context, such as the incoming IP address, User Agent information, or other context that can help the Txn-Token Service to issue the Txn-Token The Txn-Token Service responds to a successful invocation by generating a Txn-Token. The calling workload then uses the Txn-Token to authorize its calls to subsequent workloads. Subsequent workloads may obtain Txn-Tokens on their own. If the requesting service does not have an inbound token that it can use in its request to the Txn-Token Service, it generates a self- signed JWT and passes that in the request in place of the external authorization token. 2.2.2. Replacement Txn-Tokens A service within a call chain may choose to replace the Txn-Token. This can typically happen if the service wants to add to the context of the current Txn-Token To get a replacement Txn-Token, a service will request a new Txn- Token from the Txn-Token Service and provide the current Txn-Token and other parameters in the request. The Txn-Token service must exercise caution in what kinds of replacement requests it supports so as to not negate the entire value of Txn-Tokens. 2.3. Txn-Token Lifetime Txn-Tokens are expected to be short-lived (order of minutes, e.g., 5 minutes), and as a result MAY be used only for the expected duration of an external invocation. Except in the case where the request is made using a self-signed JWT, if the token or other credential presented to the Txn-Token service when requesting a Txn-Token has an expiration time, then the Txn-Token MUST NOT exceed the lifetime of the originally presented token or credential. If a long-running process such as an batch or offline task is involved, it can use a separate mechanism to perform the external invocation, but the resulting Txn-Token is still short-lived. 2.4. Benefits of Txn-Tokens Txn-Tokens help prevent spurious invocations by ensuring that a workload receiving an invocation can independently verify the user or workload on whose behalf an external call was made and any context relevant to the processing of the call. Tulshibagwale, et al. Expires 4 January 2025 [Page 5] Internet-Draft Txn-Tokens July 2024 2.5. Txn-Token Issuance and Usage Flows 2.5.1. Basic Flow Figure 1 shows the basic flow of how Txn-Tokens are used in a multi- workload environment. 1 ┌──────────────┐ 2 ┌──────────────┐ ─────────▶│ ├───────────▶ │ │ External │ │ Txn-Token │ 7 │ Endpoint │ 3 │ Service │ ◀─────────┤ ◀───────────│ │ └────┬───▲─────┘ └──────────────┘ │ │ 4 │ │ 6 ┌────▼───┴─────┐ │ │ │ Internal │ │ Microservice │ │ │ └────┬───▲─────┘ │ │ ▼ │ o 5 o 6 o │ ▲ │ │ ┌────▼───┴─────┐ │ │ │ Internal │ │ Microservice │ │ │ └──────────────┘ Figure 1: Basic Transaction Tokens Architecture 1. External endpoint is invoked using conventional authorization mechanism such as an OAuth 2.0 Access token 2. External endpoint provides context and incoming authorization (e.g., access token) to the Txn-Token Service 3. Txn-Token Service mints a Txn-Token that provides immutable context for the transaction and returns it to the requester 4. The external endpoint initiates a call to an internal microservice and provides the Txn-Token as authorization Tulshibagwale, et al. Expires 4 January 2025 [Page 6] Internet-Draft Txn-Tokens July 2024 5. Subsequent calls to other internal microservices use the same Txn-Token to authorize calls 6. Responses are provided to callers based on successful authorization by the invoked microservices 7. External client is provided a response to the external invocation 2.5.2. Replacement Txn-Token Flow An intermediate service may decide to obtain a replacement Txn-Token from the Txn-Token service. That flow is described below in Figure 2 Tulshibagwale, et al. Expires 4 January 2025 [Page 7] Internet-Draft Txn-Tokens July 2024 1 ┌──────────────┐ 2 ┌──────────────┐ ─────────▶│ ├───────────▶ │ │ External │ │ │ 10 │ Endpoint │ 3 │ │ ◀─────────┤ ◀───────────│ │ └────┬───▲─────┘ │ │ │ │ │ │ 4 │ │ 9 │ │ ┌────▼───┴─────┐ │ │ │ │ │ │ │ Internal │ │ │ │ Microservice │ │ │ │ │ │ │ └────┬───▲─────┘ │ Txn-Token │ │ │ │ Service │ ▼ │ │ │ o │ │ 5 o 9 │ │ │ o ▲ │ │ │ │ │ │ │ │ │ │ ┌────▼───┴─────┐ 6 │ │ │ ├───────────▶ │ │ Internal │ │ │ │ Microservice │ 7 │ │ │ ◀───────────│ │ └────┬───▲─────┘ │ │ │ │ │ │ ▼ │ └──────────────┘ o 8 o 9 o │ ▲ │ │ ┌────▼───┴─────┐ │ │ │ Internal │ │ Microservice │ │ │ └──────────────┘ Figure 2: Replacement Txn-Token Flow In the diagram above, steps 1-5 are the same as in Section 2.5.1 Tulshibagwale, et al. Expires 4 January 2025 [Page 8] Internet-Draft Txn-Tokens July 2024 6. An intermediate service determines that it needs to obtain a Replacement Txn-Token. It requests a Replacement Txn-Token from the Txn-Token Service. It passes the incoming Txn-Token in the request, along with any additional context it needs to send the Txn-Token Service. 7. The Txn-Token Service responds with a replacement Txn-Token 8. The service that requested the Replacement Txn-Token uses that Txn-Token for downstream call authorization 9. Responses are provided to callers based on successful authorization by the invoked microservices 10. External client is provided a response to the external invocation 3. Notational Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 4. Terminology Workload: An independent computational unit that can autonomously receive and process invocations, and can generate invocations of other workloads. Examples of workloads include containerized microservices, monolithic services and infrastructure services such as managed databases. Trust Domain: A virtually or physically separated network, which contains two or more workloads. The workloads within a Trust Domain may be invoked only through published interfaces. External Endpoint: A published interface to a Trust Domain that results in the invocation of a workload within the Trust Domain. Call Chain: A sequence of invocations that results from the invocation of an external endpoint. Transaction Token (Txn-Token): A signed JWT that has a short lifetime, which provides immutable information about the user or workload, certain parameters of the call and certain contextual attributes of the call. Authorization Context: A JSON object containing a set of claims that Tulshibagwale, et al. Expires 4 January 2025 [Page 9] Internet-Draft Txn-Tokens July 2024 represent the immutable context of a call chain. Transaction Token Service (Txn-Token Service): A special service within the Trust Domain, which issues Txn-Tokens to requesting workloads. Each Trust Domain that uses Txn-Tokens MUST have exactly one logical Txn-Token Service. 5. Txn-Token Format A Txn-Token is a JSON Web Token [RFC7519] protected by a JSON Web Signature [RFC7515]. The following describes the required values in a Txn-Token: 5.1. JWT Header In the JWT Header: * The typ Header Parameter MUST be present and MUST have the value txntoken+jwt. * Key rotation of the signing key SHOULD be supported through the use of a kid Header Parameter. Figure 3 is a non-normative example of the JWT Header of a Txn-Token { "typ": "txntoken+jwt", "alg": "RS256", "kid": "identifier-to-key" } Figure 3: Example: Txn-Token Header 5.2. JWT Body Claims The transaction token body follows the JWT format and includes existing JWT claims as well as defines new claims. These claims are described below: iss: OPTIONAL The iss claim as defined in [RFC7519] is not required as Txn-Tokens are bound to a single trust domain as defined by the aud claim and often the signing keys are known. The iss claim MUST be used in cases where the signing keys are not predetermined or it is desired that the Txn-Token Service signs with unique keys. iat: REQUIRED The issued at time of the Txn-Token as defined in [RFC7519] Tulshibagwale, et al. Expires 4 January 2025 [Page 10] Internet-Draft Txn-Tokens July 2024 aud: REQUIRED This claim, defined in [RFC7519], identifies the trust domain in which the Txn-Token is valid. This identifier MUST uniquely identify the trust domain. exp: REQUIRED Expiry time of the Txn-Token as defined in [RFC7519] txn: REQUIRED A unique transaction identifier as defined in Section 2.2 of [RFC8417]. When used in the transaction token, it identifies the entire call chain. It is strongly RECOMMENDED to provide an identifier unique within the trust domain. If providing such an identifier is not possible, then a fixed value of "N_A" MAY be supplied. sub: REQUIRED A unique identifier for the subject within the context of the aud trust domain. Unlike OpenID Connect, the sub claim is NOT associated with the iss claim. purp: REQUIRED A String defining the purpose or intent of this transaction. azd: OPTIONAL A JSON object that contains values that remain immutable throughout the call chain. rctx: OPTIONAL A JSON object that describes the environmental context of the requested transaction. 5.2.1. Purpose claim The purp claim captures the exact purpose of this particular transaction. This is often much narrower than a scope value issued to an external client. This is due to the fact that in most cases, the authorization model within the trust domain is quite different than the authorization model used with clients external to the trust domain. To that end, it is intentional to separate the concept of scope (often fairly coarse-grained) used with external clients from the purpose of the transaction used within the trust domain. How a given deployment represents the authorization model within the trust domain is out of scope for this specification. 5.2.2. Requester Context The Txn-Token SHOULD contain an rctx claim. This MAY include the IP address information of the originating user, as well as information about the computational entity that requested the Txn-Token and contextual attributes of the originating request itself. Tulshibagwale, et al. Expires 4 January 2025 [Page 11] Internet-Draft Txn-Tokens July 2024 The JSON value of the rctx claim MAY include any values the Txn-Token Service determines are interesting to downstream services that rely on the Txn-Token. The following claims are defined so that if they are included, they have the following meaning: * req_ip The IP address of the requester. This MAY be the end-user or a robotic process that requested the Transaction * authn The authentication method used to idenitfy the requester. Its value is a StringOrURI that uniquely identifies the method used. * req_wl The requesting workload. A StringOrURI that uniquely identifies the computational entity that requested the Txn-Token. This entity MUST be within the Trust Domain of the Txn-Token. If a replacement Txn-Token has been requested, then this claim will be an array of StringOrURIs representing the different workloads that have requested Txn-Tokens as part of the transaction processing. 5.2.3. Authorizaiton Details The Txn-Token SHOULD contain an azd claim. The value of this claim is a JSON object that contains name/value pairs (wherein the value could itself be an object), which together assert the details that remain immutable through the call-chain where this Txn-Token is used. Txn-Tokens are primarily used to assure identity and context for a transaction, and the content of this field is a critical part of that context. Whereas the rctx field contains environmental values related to the request, the azd field contains the actual authorizaton details that are determined by the TTS. These values are used by services using the Txn-Token to reliably obtain specific parameters needed to perform their work. The content of the azd field is determined by the Txn-Token Service and they may be computed internally or from parameters it receives from the service that requests the Txn-Token. The following is a non-normative example of an azd claim: Tulshibagwale, et al. Expires 4 January 2025 [Page 12] Internet-Draft Txn-Tokens July 2024 "azd": { "action": "BUY", // parameter of external call "ticker": "MSFT", // parameter of external call "quantity": "100", // parameter of external call "customer_type": { // computed value not present in external call "geo": "US", "level": "VIP" } } 5.2.3.1. Requesting Workload Identifier It is useful to be able to track the set of workloads that have requested a Txn-Token. The req_wl claim allows for tracking this information even through requests for a replacement Txn-Token. By default, the req_wl is a StringOrURI representing the original workload entity that requested the Txn-Token. However, if a workload within the path of servicing the transaction requests a replacement Txn-Token, then the Transaction Token Service will append the new requesting workload as a subsequent array element in the req_wl claim. This provides a "pathing" mechanism to track which services have requested replacement Txn-Tokens. If there is only a single value the req_wl will be a StringOrURI. If there is more than a single value, then req_wl will be represented by an array of StringOrURIs. { "rctx": { "req_ip": "69.151.72.123", // env context of external call "authn": "urn:ietf:rfc:6749", // env context of the external call "req_wl": [ "apigateway.trust-domain.example", "workload3.trust-domain.example" ] } } 5.2.4. Example The figure below Figure 4 shows a non-normative example of the JWT body of a Txn-Token: Tulshibagwale, et al. Expires 4 January 2025 [Page 13] Internet-Draft Txn-Tokens July 2024 { "iat": "1686536226000", "aud": "trust-domain.example", "exp": "1686536526000", "txn": "97053963-771d-49cc-a4e3-20aad399c312", "sub": "d084sdrt234fsaw34tr23t", "rctx": { "req_ip": "69.151.72.123", // env context of external call "authn": "urn:ietf:rfc:6749", // env context of the external call "req_wl": "apigateway.trust-domain.example" // the internal entity that requested the Txn-Token }, "purp" : "trade.stocks", "azd": { "action": "BUY", // parameter of external call "ticker": "MSFT", // parameter of external call "quantity": "100", // parameter of external call "customer_type": { // computed value not present in external call "geo": "US", "level": "VIP" } } } Figure 4: Example: Txn-Token Body 6. Txn-Token Service A Txn-Token Service defines a profile of the OAuth 2.0 Token Exchange [RFC8693] endpoint that can respond to Txn-Token issuance requests. This profile of the OAuth 2.0 Token Exchange [RFC8693] specification MUST be used to obtain Txn-Tokens. The unique properties of the Txn- Token requests and responses are described below. The Txn-Token Service MAY optionally support other OAuth 2.0 endpoints and features, but that is not a requirement for it to be a Txn-Token Service. Each Trust Domain that uses Txn-Tokens MUST have exactly one logical Txn-Token Service. 7. Requesting Txn-Tokens A workload requests a Txn-Token from a Transaction Token Service using a profile of the OAuth 2.0 Token Exchange [RFC8693]. Txn- Tokens may be requested for both externally originating or internally originating requests. The profile describes how required and optional context can be provided to the Transaction Token Service in order for the Txn-Token to be issued. The request to obtain a Txn- Token using this method is called a Txn-Token Request, and a Tulshibagwale, et al. Expires 4 January 2025 [Page 14] Internet-Draft Txn-Tokens July 2024 successful response is called a Txn-Token Response. The Txn-Token profile of the OAuth 2.0 Token Exchange [RFC8693] is described below. 7.1. Txn-Token Request A workload requesting a Txn-Token must provide the Transaction Token Service with proof of its identity (client authentication), the purpose of the Txn-Token and optionally any additional context relating to the transaction being performed. Most of these elements are provided by the OAuth 2.0 Token Exchange specification and the rest are defined as new parameters. Additionally, this profile defines a new token type URN urn:ietf:params:oauth:token- type:txn_token which is used by the requesting workload to identify that it is requesting the Txn-Token Response to contain a Txn-Token. To request a Txn-Token the workload invokes the OAuth 2.0 [RFC6749] token endpoint with the following parameters: * grant_type REQUIRED. The value MUST be set to urn:ietf:params:oauth:grant-type:token-exchange * audience REQUIRED. The value MUST be set to the Trust Domain name * scope REQUIRED. A space-delimited list of case-sensitive strings where the value(s) MUST represent the specific purpose or intent of the transaction. * requested_token_type REQUIRED. The value MUST be urn:ietf:params:oauth:token-type:txn_token * subject_token REQUIRED. The value MUST represent the subject of the transaction. This could be an inbound token received by an API Gateway, or a self-signed JWT constructed by a workload initiating a transaction, the type of which is identified by subject_token_type. * subject_token_type REQUIRED. The value MUST indicate the type of the token or value present in the subject_token parameter The following additional parameters MAY be present in a Txn-Token Request: * request_context OPTIONAL. This parameter contains a base64url encoded JSON object which represents the context of this transaction. The parameter SHOULD be present and how the Transaction Token Service uses this parameter is out of scope for this specification. Tulshibagwale, et al. Expires 4 January 2025 [Page 15] Internet-Draft Txn-Tokens July 2024 * request_details OPTIONAL. This parameter contains a base64url encoded JSON object which represents additional details of the transaction that MUST remain immutable throughout the processing of the transaction by multiple workloads. The requesting workload MUST authenticate its identity to the Transaction Token Service. The exact client authentication mechanism used is outside the scope of this specification. The figure below Figure 5 shows a non-normative example of a Txn- Token Request. POST /txn-token-service/token_endpoint HTTP 1.1 Host: txn-token-service.trust-domain.example Content-Type: application/x-www-form-urlencoded grant_type=urn%3Aietf%3Aparams%3Aoauth%3Agrant-type%3Atoken-exchange &requested_token_type=urn%3Aietf%3Aparams%3Aoauth%3Atoken-type%3Atxn-token &audience=http%3A%2F%2Ftrust-domain.example &scope=finance.watchlist.add &subject_token=eyJhbGciOiJFUzI1NiIsImtpZC...kdXjwhw &subject_token_type=urn%3Aietf%3Aparams%3Aoauth%3Atoken-type%3Aaccess_token &request_context=eyAiaXBfYWRkcmVzcyI6ICIxMjcuMC4wLjEiLCAiY2xpZW50IjogIm1vYmlsZS1hcHAiLCAiY2xpZW50X3ZlcnNpb24iOiAidjExIiB9 Figure 5: Example: Txn-Token Request 7.2. Subject Token Types The subject_token_type parameter value MUST be a URI [RFC3986]. It MAY be any one of the subject token types described in Section 3 of OAuth 2.0 Token Exchange [RFC8693] except the Refresh Token type (i.e., urn:ietf:params:oauth:token-type:refresh_token), or it MAY be a self-signed JWT, as described below, or it MAY be a custom URI agreed to between requesters and the Txn-Token Service. The Txn-Token Service MAY support other token formats, which MAY be specified in the subject_token_type parameter. Any value used in this parameter MUST be a URI as specified in RFC 8693 [RFC8693]. 7.2.1. Self-Signed Subject Token Type A requester MAY use a self-signed JWT as a subject_token value. In that case, the requester MUST set the subject_token_type value to: urn:ietf:params:oauth:token-type:self_signed. This self-signed JWT MUST contain the following claims: Tulshibagwale, et al. Expires 4 January 2025 [Page 16] Internet-Draft Txn-Tokens July 2024 * iss: The unique identifier of the requesting workload. The Txn- Token Service SHALL use this value in determining the req_wl value in the Txn-Token issued in response to this request. * sub: The subject for whom the Txn-Token is being requested. The Txn-Token Service SHALL use this value in determining the sub value in the Txn-Token issued in the response to this request. * aud: The unique identifier of the Txn-Token Service. The Txn- Token Service SHALL verify that this value matches its own unique identifier. * iat: The time at which the self-signed JWT was created. Note that the Txn-Token Service may reject self-signed tokens with an iat value that is unreasonably far in the past or future. * exp: The expiration time for the JWT. This should be a very short duration (order of seconds) in order to prevent any abuse of the JWT. The self-signed JWT MAY contain other claims. 7.3. Txn-Token Request Processing When the Transaction Token Service receives a Txn-Token Request it MUST validate the requesting workload client authentication and determine if that workload is authorized to obtain the Txn-Tokens with the requested values. The authorization policy for determining such issuance is out of scope for this specification. Next, the Transaction Token Service MUST validate the subject_token and determine the value to specify as the sub of the issued Txn- Token. The Txn-Token Service MUST ensure the sub value is unique within the trust domain defined by the aud claim. The Transaction Token Service MUST set the iat claim to the time of issuance of the Txn-Token. The Transaction Token Service MUST set the aud claim to an identifier representing the Trust Domain of the Transaction Token Service. If the Transaction Token Service supports multiple trust domains, then it MUST determine the correct aud value for this request. The Transaction Token Service MUST set the exp claim to the expiry time of the Txn-Token. The Transaction Token Service MUST set the txn claim to a unique ID specific to this transaction. The Transaction Token Service MAY set the iss claim of the Txn-Token to a value defining the entity that signed the Txn-Token. This claim MUST be ommitted if not set. Tulshibagwale, et al. Expires 4 January 2025 [Page 17] Internet-Draft Txn-Tokens July 2024 The Transaction Token Service MUST evaluate the value specified in the scope parameter of the request to determine the purp claim of the issued Txn-Token. If a request_context parameter is present in the Txn-Token Request, the data SHOULD be added to the rctx object of the Txn-Token. In addition, the Transaction Token Service SHOULD add the authenticated requesting workload identifier in the rctx object as the req_wl claim. If a request_details parameter is present in the Txn-Token Request, then the Transaction Token Service SHOULD propagate the data from the request_details object into the claims in the azd object as authorized by the Transaction Token Service authorization policy for the requesting client. The Transaction Token Service MAY provide additional processing and verification that is outside the scope of this specification. 7.4. Txn-Token Response A successful response to a Txn-Token Request by a Transaction Token Service is called a Txn-Token Response. If the Transaction Token Service responds with an error, the error response is as described in Section 5.2 of [RFC6749]. The following describes required values of a Txn-Token Response: * The token_type value MUST be set to N_A per guidance in OAuth 2.0 Token Exchange [RFC8693] * The access_token value MUST be the Txn-Token JWT * The issued_token_type value MUST bet set to urn:ietf:params:oauth:token-type:txn_token * The response MUST NOT include the values expires_in, refresh_token and scope Figure 6 shows a non-normative example of a Txn-Token Response. Tulshibagwale, et al. Expires 4 January 2025 [Page 18] Internet-Draft Txn-Tokens July 2024 HTTP/1.1 200 OK Content-Type: application/json Cache-Control: no-store { "token_type": "N_A", "issued_token_type": "urn:ietf:params:oauth:token-type:txn_token", "access_token": "eyJCI6IjllciJ9...Qedw6rx" } Figure 6: Example: Txn-Token Response 7.5. Creating Replacement Txn-Tokens A workload within a call chain may request the Transaction Token Server to replace a Txn-Token. Workloads MAY request replacement Txn-Tokens in order to change (add to, remove or modify) the asserted values within a Txn-Token. The values of the sub and aud claims MUST remain unchanged in a replacement Txn-Token. If the claim rctx is present in the original Txn-Token, then it MUST be present and unchanged in the replacement Txn-Token except for the req_wl claim which MUST be updated to include the requesting workload identifier. 7.5.1. Txn-Token Service Responsibilities When issuing replacement Txn-Tokens, a Txn-Token Service: * MAY enable modifications to asserted values that reduce the scope of permitted actions * MAY enable additional asserted values * SHOULD NOT enable modification to asserted values that expand the scope of permitted actions * MUST NOT modify sub and aud values of the Txn-Token in the request * MUST NOT remove any of the existing requesting workload identifiers from the req_wl field in the rctx claim of the Txn- Token Tulshibagwale, et al. Expires 4 January 2025 [Page 19] Internet-Draft Txn-Tokens July 2024 7.5.2. Replacement Txn-Token Request To request a replacement Txn-Token, the requester makes a Txn-Token Request as described in Section 7.1 but includes the Txn-Token to be replaced as the value of the subject_token parameter. The scope value in the replacement request, if different from that in the original Txn-Token, MUST NOT increase the authorization surface beyond that of the original Txn-Token. 7.5.3. Replacement Txn-Token Response A successful response by the Txn-Token Service to a Replacement Txn- Token Request is a Txn-Token Response as described in Section 7.4 7.6. Mutual Authentication of the Txn-Token Request A Txn-Token Service MUST ensure that it authenticates any workloads requesting Txn-Tokens. In order to do so: * It MUST name a limited, pre-configured set of workloads that MAY request Txn-Tokens * It MUST individually authenticate the requester as being one of the named requesters * It SHOULD rely on mechanisms, such as [SPIFFE] used in conjunction with MTLS [RFC8446], or some other means of performing MTLS, to securely authenticate the requester * It SHOULD NOT rely on insecure mechanisms, such as long-lived shared secrets to authenticate the requesters The requesting workload MUST have a pre-configured location for the Transaction Token Service. It SHOULD rely on mechanisms, such as [SPIFFE], to securely authenticate the Transaction Token Service before making a Txn-Token Request. 8. Using Txn-Tokens Txn-Tokens need to be communicated between workloads that depend upon them to authorize the request. Such workloads will often present HTTP [RFC9110] interfaces for being invoked by other workloads. This section specifies the HTTP header the invoking workload MUST use to communicate the Txn-Token to the invoked workload, when the invoked workload presents an HTTP interface. Note that the standard HTTP Authorization header MUST NOT be used because that may be used by the workloads to communicate channel authorization. Tulshibagwale, et al. Expires 4 January 2025 [Page 20] Internet-Draft Txn-Tokens July 2024 8.1. Txn-Token HTTP Header A workload that invokes another workload using HTTP and needs to present a Txn-Token to the invoked workload MUST use the HTTP Header Txn-Token to communicate the Txn-Token. The value of this header MUST be the JWT that represents the Txn-Token. 9. Security Considerations 9.1. Txn-Token Lifetime A Txn-Token is not resistant to replay attacks. A long-lived Txn- Token therefore represents a risk if it is stored in a file, discovered by an attacker, and then replayed. For this reason, a Txn-Token lifetime must be kept short, not exceeding the lifetime of a call-chain. Even for long-running "batch" jobs, a longer lived access token should be used to initiate the request to the batch endpoint. It then obtains short-lived Txn-Tokens that may be used to authorize the call to downstream services in the call-chain. Because Txn-Tokens are short-lived, the Txn-Token response from the Txn-Token service does not contain the refresh_token field. A Txn- Token cannot be issued by presenting a refresh_token. The expires_in and scope fields of the OAuth 2.0 Token Exchange specification [RFC8693] are also not used in Txn-Token responses. The expires_in is not required since the issued token has an exp field, which indicates the token lifetime. The scope field is omitted from the response in favor of the purp claim in the Txn- Token. 9.2. Access Tokens When creating Txn-Tokens, the Txn-Token MUST NOT contain the Access Token presented to the external endpoint. If an Access Token is included in a Txn-Token, an attacker may extract the Access Token from the Txn-Token, and replay it to any Resource Server that can accept that Access Token. Txn-Token expiry does not protect against this attack since the Access Token may remain valid even after the Txn-Token has expired. Tulshibagwale, et al. Expires 4 January 2025 [Page 21] Internet-Draft Txn-Tokens July 2024 9.3. Client Authentication How requesting clients authenticate to the Transaction Token Service is out of scope for this specification. However, if using the actor_token and actor_token_type parameters of the OAuth 2.0 Token Exchange specification, both parameters MUST be present in the request. The actor_token MUST authenticate the identity of the requesting workload. 9.4. Replacement Tokens Validation of a replacement Txn-Token, as well as any Txn-Token, is critical to the security of the entire transaction invocation sequence. Only Txn-Tokens issued by a trusted Transaction Token Service may be trusted, so verification of the Txn-Token signature is required. For replacement transaction tokens, not only must the JWT signature be verified but also the workload identity of the workload requesting the replacement Txn-Token. 9.5. Scope and Purpose processing The authorization model within a trust domain boundary is most often quite different from the authorization model (e.g. OAuth scopes) used with client external to the trust domain. This makes managing unintentional scope increase a critical aspect of the Transaction Token Service. The TTS MUST ensure that the requested purpose (scope) of the Txn-Token is equal or less than the scope(s) identified in the subject_token. This is also true of requesting a replacement Txn-Token. The TTS MUST ensure there is not unintentional increase in authorization scope. 10. Privacy Considerations 10.1. Obfuscation of Personal Information Some rctx claims may be considered personal information in some jurisdictions and if so their values need to be obfuscated. For example, originating IP address (req_ip) is often considered personal information and in that case must be protected through some obfuscation method (e.g. salted SHA256). 10.2. Logging Txn-Tokens SHOULD NOT be logged if they contain Personally Identifiable Information (PII). What constitutes PII depends upon the use case, but in some cases even an email address (which could be a sub value) can be protected PII, which should not be logged. Tulshibagwale, et al. Expires 4 January 2025 [Page 22] Internet-Draft Txn-Tokens July 2024 11. IANA Considerations This specification registers the following token type identifiers to the "OAuth URI" subregistry of the "OAuth Parameters" [IANA.OAuth.Parameters] registry. It also registers the following claims defined in Section Section 5.2 in the IANA JSON Web Token Claims Registry defined in [RFC7519]. It also registers the Media Type [IANA.MediaTypes] "txntoken+jwt" as defined in the section Section 5.1. 11.1. OAuth URI Subregistry Contents * URN: urn:ietf:params:oauth:token-type:txn_token * Common Name: Transaction Token * Change Controller: IESG * Specification Document Section Section 7.1 of this specification * URN: urn:ietf:params:oauth:token-type:self_signed * Common Name: Token type for Self-signed JWT * Change Controller: IESG * Specification Document: Section Section 7.2 of this specification 11.2. JWT Claims Registry Contents * Claim Name: azd - Claim Description: The authorization context details - Change Controller: IESG - Specification Document: Section Section 5.2 of this specification * Claim Name: rctx - Claim Description: The requester context - Change Controller: IESG - Specification Document: Section Section 5.2.2 of this specification Tulshibagwale, et al. Expires 4 January 2025 [Page 23] Internet-Draft Txn-Tokens July 2024 * Claim Name: purp - Claim Description: The purpose of the transaction - Change Controller: IESG - Specification Document: Section Section 5.2 of this specification 11.3. IANA Media Type Registration Contents The following entry will be proposed using the IANA Media Type registration [IANA.MediaTypes] form. * Applicant Name: Atul Tulshibagwale * Applicant Email: atul@sgnl.ai * Type Name: "application (RFC 2046)" * Subtype Name: "txntoken+jwt" * Required Parameters: "N/A." * Optional Parameters: "N/A." * Encoding Considerations: 7-bit text * Security Considerations: 1. The media type is used to identify JWTs that may be used as Transaction Tokens. It is a piece of data, and may not contain executable content. 2. Transaction Tokens are short-lived tokens used within a trusted environment, so there are no privacy considerations. Transaction Tokens are unmodifiable tokens, which need integrity protection. 3. The JWTs representing Transaction Tokens are signed, and therefore are integrity protected. A recipient of a Transaction Token must verify the signature on the Transaction Token before using it. 4. There are no additional security considerations specific to the use of JWTs as Transaction Tokens Tulshibagwale, et al. Expires 4 January 2025 [Page 24] Internet-Draft Txn-Tokens July 2024 5. The Transaction Tokens format does not require the use of links within the token. If links are used by specific instances of Transaction Tokens, then their interpretation is usage specific * Interoperability Considerations: Transaction Tokens inherit all interoperability properties of JWTs. * Published Specification: this document (when published) * Application Usage: Any application supporting the use of JWTs * Frabment Identifier Consideration: N/A. * Restrictions on Usage: Any application supporting the use of JWTs * Intended Usage: Common * Contact Person: Atul Tulshibagwale 11.4. HTTP Header The header name Txn-Token is proposed to be added to the HTTP Field Name Registry [IANA.HTTP.FieldNames]. This header is defined in the section Section 8.1. The following entry will be proposed in the HTTP Field Name Registry: * Field Name: Txn-Token * Status: permanent * Specification Document: Section Section 8.1 of this document * Comment: The Authorization header cannot be used for Txn-tokens because that may be used for service-to-service authorization, and the services may simultaneously require the use of Txn-tokens to convey detailed immutable information such as user identity and details of fine-grained authorization that are included in the Txn-token. 12. References 12.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . Tulshibagwale, et al. Expires 4 January 2025 [Page 25] Internet-Draft Txn-Tokens July 2024 [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, . [RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018, . [RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, October 2012, . [RFC7519] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015, . [RFC7515] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May 2015, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8693] Jones, M., Nadalin, A., Campbell, B., Ed., Bradley, J., and C. Mortimore, "OAuth 2.0 Token Exchange", RFC 8693, DOI 10.17487/RFC8693, January 2020, . [RFC8417] Hunt, P., Ed., Jones, M., Denniss, W., and M. Ansari, "Security Event Token (SET)", RFC 8417, DOI 10.17487/RFC8417, July 2018, . [RFC9068] Bertocci, V., "JSON Web Token (JWT) Profile for OAuth 2.0 Access Tokens", RFC 9068, DOI 10.17487/RFC9068, October 2021, . [RFC9110] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP Semantics", STD 97, RFC 9110, DOI 10.17487/RFC9110, June 2022, . [RFC9111] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP Caching", STD 98, RFC 9111, DOI 10.17487/RFC9111, June 2022, . Tulshibagwale, et al. Expires 4 January 2025 [Page 26] Internet-Draft Txn-Tokens July 2024 [IANA.HTTP.FieldNames] "HTTP Authentication Schemes", n.d., . [IANA.OAuth.Parameters] IANA, "OAuth Parameters", n.d., . [IANA.MediaTypes] IANA, "Media Types", n.d., . [OpenIdConnect] Sakimura, N., Bradley, J., Jones, M., Medeiros, B. de., and C. Mortimore, "OpenID Connect Core 1.0 incorporating errata set 2", November 2014, . 12.2. Informative References [SPIFFE] Cloud Native Computing Foundation, "Secure Production Identity Framework for Everyone", n.d., . Acknowledgements Contributors Dr. Kelley W. Burgin, PhD. MITRE Corporation Email: kburgin@mitre.org Brian Campbell Ping Identity Email: bcampbell@pingidentity.com Evan Gilman SPIRL Email: evan@spirl.com Kai Lehmann 1&1 Mail & Media Development & Technology GmbH Email: kai.lehmann@1und1.de Tulshibagwale, et al. Expires 4 January 2025 [Page 27] Internet-Draft Txn-Tokens July 2024 Arndt Schwenkschuster Microsoft Email: arndts@microsoft.com Hannes Tschofenig Arm Ltd. Email: Hannes.Tschofenig@arm.com Authors' Addresses Atul Tulshibagwale SGNL Email: atul@sgnl.ai George Fletcher Capital One Email: george.fletcher@capitalone.com Pieter Kasselman Microsoft Email: pieter.kasselman@microsoft.com Tulshibagwale, et al. Expires 4 January 2025 [Page 28]