Frequently Asked Questions About REXX Last Revised: August 12, 1994 Eric Giguere giguere@watcom.on.ca ---------------------------------------------------------------- Copyright Information This document is Copyright 1993, 1994 by Eric Gigučre. Permission is granted to reproduce and distribute all or part of this document for non-commercial purposes only. All other uses must first be cleared with the author. The author may be contacted on the Internet at the address giguere@watcom.on.ca or on paper by writing to Watcom International, 415 Phillip Street, Waterloo, Ontario, Canada, N2L 3X2. Please note, however, that this document is not published or endorsed by Watcom. ---------------------------------------------------------------- Introduction This document is intended to serve as a useful reference for REXX-related information. It aims for breadth as opposed to depth, and references to other material are given where appropriate. Suggestions and updates should be sent to the author in an attempt to keep this document relevant and up- to-date. Readers will notice the prevalence of OS/2-related materials in this document. Most of the REXX-related activity at this time is occurring on the OS/2 platform. This document is not intended to be OS/2-specific. The author is quite happy to include information on other platforms if you pass it on to him. More information on REXX can also be had from the REXX Language Association. See below for details. ---------------------------------------------------------------- A. What Is REXX? REXX is a programming language designed by Michael Cowlishaw of IBM UK Laboratories. In his own words: "REXX is a procedural language that allows programs and algorithms to be written in a clear and structured way." REXX doesn't look that different from any other procedural language. Here's a simple REXX program: /* Count some numbers */ say "Counting..." do i = 1 to 10 say "Number" i end What makes REXX different from most other languages is that it is also designed to be used as a macro language by arbitrary application programs. The idea is that application developers don't have to design their own macro languages and interpreters. Instead they use REXX as the macro language and support the REXX programming interface. If a REXX macro comes across an expression or function call that it cannot resolve, it can ask the application to handle it instead. The application only has to support the features that are specific to it, freeing the developer from handling the mundane (and time-consuming) task of writing a language interpreter. And if all applications use REXX as their macro language, the user only has to learn one language instead of a dozen. ---------------------------------------------------------------- B. REXX and the Internet Networks connect computers in various ways for the exchange of data. The terminology is a bit confusing to the new user. Here are the definitions this document uses: Usenet: Not really a network, just the set of machines that exchange network news. Network news is really an extended form of electronic mail that groups messages from individuals into newsgroups that users can read using special newsreaders. Internet: The worldwide network based on TCP/IP protocols. Besides being able to receive mail and newsgroups, these machines can use programs like ftp and telnet to communicate with other machines in real time. Most Internet machines are Unix-based. BITNET: The worldwide network that connects many IBM mainframes. BITNET users can also transfer files using methods that are incompatible with those of the Internet. Newsgroups The Usenet group comp.lang.rexx exists for discussion of REXX in all its variations. Anything posted to this newsgroup also gets sent to the REXXLIST mailing list (see below) and vice-versa. Other newsgroups of interest are machine-specific. Recommended groups are comp.os.os2.programmer.misc and comp.sys.amiga.programmer. FTP Sites of Interest FTP is a file transmission protocol used on the Internet to transfer files between machines. The transfers are done in real time and usually require that the user have an account on both machines. However, many machines on the Internet support what is known as anonymous FTP, which allows users on other machines access to a limited set of files without requiring an account. Some of the more interesting sites that offer this service are: rexx.uwaterloo.ca General repository for REXX-related information, including free REXX interpreters for Unix and DOS. An XEDIT clone for Unix and OS/2 may also be found here. Look under /pub/rexx. ftp.pvv.unit.no The official home of Regina, one of the free Unix interpreters. Archives of the messages in comp.lang.rexx and RexxLA messages are also maintained here. Check under /pub/rexx. ftp-os2.cdrom.com General OS/2 archives. Look under ftp.luth.se /pub/os2. wuarchive.wustl.edu General Amiga archive. Look under /pub/aminet. Mailing Lists Mailing lists are similar to newsgroups but use normal electronic mail to deliver the messages. The following mailing lists are mostly BITNET-based but are accessible from the Internet as well: List name BITNET Internet Discusses Node Address REXXLIST UCF1VM ucf1vm.cc.ucf.edu REXX in general AREXX-L UCF1VM ucf1vm.cc.ucf.edu Amiga REXX PC-REXX UCF1VM ucf1vm.cc.ucf.edu Personal REXX REXXCOMP UCF1VM ucf1vm.cc.ucf.edu IBM's REXX compiler TSO-REXX UCF1VM ucf1vm.cc.ucf.edu TSO REXX VM-REXX UCF1VM ucf1vm.cc.ucf.edu VM/SP REXX UREXX-L (none) liverpool.ac.ak Unix REXX To subscribe to any of these lists, send a one-line message to the address LISTSERV@node, where node is the BITNET node or Internet address for the list you wish to join. In the body of your message should be the line SUBSCRIBE list-name your--full-name as in SUBSCRIBE UREXX-L Eric Giguere You will then be subscribed to the list and messages will start arriving in your mailbox. To send a message to the list, simply mail it to listname@node, as in UREXX- L@liverpool.ac.uk. Note the distinction between the LISTSERV address and the listname address. You can receive help by sending a HELP message to the LISTSERV address. Note that some of these mailing lists may be available on Usenet in the form of newsgroups with names starting with "bit.listserv". Ask your system administrator if you're not sure. Thanks to Scott Ophof for providing this summary. Gopher Service Gopher clients may find REXX-related information at the site gopher.pvv.unit.no (Europe) and index.almaden.ibm.com (N. America). ---------------------------------------------------------------- C. Free REXX Products Interpreters There are at least three REXX interpreters available for free on the Internet. The first two are Unix based and are well-supported by their authors. The third is an MS-DOS interpreter. Regina is Anders Christensen's REXX interpreter for various flavours of Unix and VMS. It is fairly complete and Anders even has an API for developers. It also apparently can be ported to OS/2. Anders can be reached at anders@pvv.unit.no. Regina's official home is ftp.pvv.unit.no. REXX/imc is Ian Collier's REXX interpreter for SunOS, though it has also been ported to other Unix systems. Ian can be reached at imc@prg.ox.ac.uk. BREXX is Bill Vlachoudis' REXX interpreter for MS-DOS. The interpreter is not complete but is quite small. Bill can be reached at bill@donoussa.physics.auth.gr. All three interpreters are available for anonymous FTP on rexx.uwaterloo.ca in the /pub/freerexx directory, each interpreter in its own subdirectory. Regina and REXX/imc are in source form, BREXX is only available as binary. REXX-Aware Text Editors Also on rexx.uwaterloo.ca in the /pub/editors directory is the text editor THE by Mark Hessling (mark@snark.itc.gu.edu.au). THE is a full-featured XEDIT/KEDIT clone (by XEDIT here we mean the IBM mainframe text editor, not the X Windows editor xedit) with REXX support. THE is available in versions for OS/2 and Unix. THE's official home is on ftp.gu.edu.au in /src/THE. ---------------------------------------------------------------- D. Commercial REXX Products Interpreters REXX interpreters are available commercially for a wide variety of systems and come standard on some operating platforms such as the Amiga, OS/2 and the IBM AS/400 and mainframes (VM, TSO, VSE). The following vendors sell REXX interpreters: The Workstation Group [Various UNIX platforms, also VMS] 6300 River Road Rosemont, IL 60018 (800) 228-0255 (US only) sales@wrkgrp.com Quercus Systems [DOS, Windows, Windows NT, OS/2] P.O. Box 2157 Saratoga, CA 95070 (408) 867-7399 (800) 440-5944 (US & Canada) 75300.2450@compuserve.com Simware [Novell Netware] 2 Gurdwara Road Ottawa, Ontario Canada K2E 1A2 (613) 727-1779 IBM also sells REXX interpreters for AIX and Netware. Compilers Although REXX is usually thought of as an interpreted language, it can also be compiled. The following vendors all sell REXX compilers: Dineen Edwards Group [Amiga] 19785 West 12 Mile Road, Suite 305 Southfield, MI 48076-2553 (313) 352-4288 IBM [VSE, MVS/TSO and VM/CMS] Contact your local representative Systems Center [VM/CMS] 1800 Alexander Bell Drive Reston, VA 22091 Visual Development Environments There are three REXX-based visual development environments available for OS/2: VX-REXX Watcom International 415 Phillip Street Waterloo, Ontario Canada N2L 3X2 Phone: (519) 886-3700 Fax: (519) 747-4971 VisPro/REXX HockWare 315 N. Academy St., Suite 100 Cary, NC 27513 Phone: (919) 380-0616 Fax: (919) 380-0757 GpfRexx Gpf Systems 10 Falls Road Moodus, Conn. 06469 Phone: (203) 873-3300 Fax: (203) 873-3302 REXX-Aware Text Editors Clones of the popular XEDIT editor are available for Unix from the Workstation Group (see address above) and for DOS and OS/2 from Mansfield Software. Tritus sells an ISPF/PDF text editor with REXX support for OS/2. One Up sells SourceLink, an integrated development environment for OS/2 with REXX macro capabilities. Command Technology sells the SPF/PC editor. Mansfield Software P.O. Box 532 Storrs, CT 06268 Phone: (203) 429-8402 Fax: (203) 487-1185 Tritus 3300 Bee Caves Road, Suite 650 Austin, Texas 78746 Phone: (512) 794-5800 Fax: (512) 7940-3833 One Up 1603 LBJ Freeway, Suite 200 Dallas, Texas 75243 Phone: (800) 678-0187 Command Technology 1040 Marina Village Parkway Alameda, CA 94501 Phone: (800) 336-3320 The OS/2 Enhanced Editor (EPM.EXE), which is bundled with OS/2, also has REXX support. Use its online help and search for the 'rx' command. REXX Extensions A number of vendors sell extensions to REXX: -- Quercus Systems (address above) sells REXXLIB (a collection of over 150 REXX extension functions), REXXCOMM (a function package for accessing serial ports from REXX) and REXXTERM (a full-featured asynchronous communications program). -- SofTouch Systems sells the GammaTech REXX SuperSet/2, a collection of over 300 REXX extension functions for OS/2. -- dSoft Development sells the dbfREXX function library that lets you read and write dBASE files from OS/2 REXX. SofTouch Systems 1300 S. Meridian, Suite 600 Oklahoma City, Okla. 73108-1751 Phone: (405) 947-8080 Fax: (405) 632-6537 dSoft Development 4710 Innsbruk Drive Houston, Texas 77066 Phone: (405) 360-3045 Fax: (713) 537-0318 ---------------------------------------------------------------- E. REXX and ANSI The American National Standards Institute (ANSI) sets national standards for various things in the United States, including programming languages. The X3J18 REXX Standards Committee is currently defining a formal standard for the REXX language, using Mike Cowlishaw's book as its base document. The Committee meets 3 or 4 times a year and holds ongoing discussions throughout the year by electronic mail. Members of X3J18 are mostly REXX implementors, but anyone can participate. The Committee intends to release a draft standard next year. More information can be had from the vice-chair, Neil Milsted at nfnm@wrkgrp.com. Note that public ANSI documents relating to X3J18 can be had using the LISTSERV service at PSUVM on BITNET or by Gopher to gopher.pvv.unit.no on the Internet. ---------------------------------------------------------------- F. The REXX Language Association The REXX Language Association is an independent organization dedicated to promoting the use of the REXX programming language. Activities of the RexxLA include: -- Maintaining an electronic mail server where members share information. -- Distributing a quarterly newsletter. -- Providing electronic resources for access to language expertise, hints and tips, example programs, product sources, and other valuable information. -- Developing resource guides, both printed and electronic, for publications, products, training and language experts. -- Developing educational, guest speaker, and publicity programs to promote the use of REXX. -- Participating in the work of standards bodies. -- Promoting integration of REXX into all operating systems and as the common scripting language for a wide array of software. -- Cooperating with the REXX Symposium in providing an annual conference forum. Join today and start reaping the benefits available from an international consortium of individuals, corporations, vendors, authors and experts. For more information, contact the REXX Language Association by mail or fax: RexxLA Membership 6300 North River Road, Suite 501 Rosemont, Illinois 60018 Fax: (708) 696-2277 Or by electronic mail at rexxla@wrkgrp.com. ---------------------------------------------------------------- G. The REXX Symposium The REXX Symposium is an annual conference devoted to REXX, attended both by users and vendors, held at the beginning of May. It is sponsored by the Stanford Linear Accelerator, with the cooperation of the RexxLA. The 1995 conference is still being planned. ---------------------------------------------------------------- H. REXX Bibliography Mike Cowlishaw and Linda Green have kindly provided the following partial bibliography of REXX books. The REXX Language -- M.F. Cowlishaw English: ISBN 0-13-780735-X Prentice-Hall, 1985 ISBN 0-13-780651-5 2nd edition, 1990 German: ISBN 3-446-15195-8 Carl Hanser Verlag, 1988 ISBN 0-13-780784-8 P-H International, 1988 Japanese: ISBN 4-7649-0136-6 Kindai-kagaku-sha, 1988 The REXX Reference Summary Handbook -- Dick Goran ISBN 0-9639854-1-8, CFS Nevada Inc., 1994 Modern Programming Using REXX -- Robert P. O'Hara and David R. Gomberg English: ISBN 0-13-597311-2 Prentice-Hall, 1985 ISBN 0-13-579329-5 2nd edition, 1988 REXX in the TSO Environment -- Gabriel F. Gargiulo ISBN 0-89435-354-3, QED Information Systems Inc. 320 pages, 1990 Using OS/2 REXX -- Gabriel F. Gargiulo ISBN 0-894-35449-3, QED Publishing Group Practical Usage of REXX -- Anthony S. Rudd ISBN 0-13-682790-X, Ellis Horwood (Simon & Schuster), 1990 Using ARexx on the Amiga -- Chris Zamara and Nick Sullivan ISBN 1-55755-114-6, Abacus Books, 1991 The REXX Handbook -- Edited by Gabe Goldberg and Phil Smith III ISBN 0-07-023682-8, McGraw-Hill, 1991 Programming in REXX -- Charles Daney ISBN 0-07-015305-1, McGraw-Hill, 1992 Command Language Cookbook -- Hallett German ISBN 0-442-00801-5, Van Nostrand Reinhold, 1992 OS/2 2.1 REXX Handbook -- Hallett German ISBN 0-442-01734-0, Van Nostrand Reinhold, 1994 OS/2 REXX: From Bark to Byte -- Inter. Technical Supp. Org. (IBM) IBM Document Number GG24-4199-00, 1993 REXX: Advanced Techniques for Programmers -- Peter Kiesel ISBN 0-07-034600-3, McGraw Hill, 1992 REXX Tools and Techniques -- Barry Nirmal ISBN 0-89435-417-5, QED Publishing Group, 1993 The ARexx Cookbook -- Merrill Callaway ISBN 0-96-327730-8, Whitestone, 1992 Writing OS/2 REXX Programs -- Ronny Richardson ISBN 0-07-052372, McGraw Hill, 1992 Writing VX-REXX Programs -- Ronny Richardson ISBN 0-07-9111911-5, McGraw Hill, 1994 ===================================================================== I. Common REXX Coding Errors The following list of common REXX coding errors is derived from a list included in the online documentation for Watcom VX-REXX. ----------------------------------------------------------------- 1. Blank space where it does not belong In REXX expressions, blank space is interpreted as an implicit concatenation operator -- the terms are concatenated with a blank in between. As a result, REXX will interpret many mistyped statements as an expression involving the blank concatenation operator. For example, inserting a blank after a function name in a function call changes the meaning of the expression from: text_upper = translate( text ) to: text_upper = "TRANSLATE" || " " || text Blank space also plays a special role in the PARSE instruction. Compare the following: parse arg a b c parse arg a, b, c The first line parses the first argument passed to the routine into three parts, while the second line sets the three variables to the value of the first three arguments passed to the routine. ----------------------------------------------------------------- 2. Function calls versus the CALL statement When you call a routine that returns a result, you must enclose the parameters in parentheses: text = VRGet( "EF_1", "Value" ) Always assign the value of a function to a variable, or use the CALL statement as described below. Otherwise REXX will pass the return value to the default host environment, leading to strange and possibly damaging behaviour on some systems. If you are calling a routine that does not return a value, or you wish to ignore the return value, you should use the CALL instruction: call VRSet "EF_1", "BackColor", "Blue" Note that there is no comma between the name of the routine and the first parameter. Note also that parentheses are not used when using the CALL instruction. ----------------------------------------------------------------- 3. Line continuation The comma is used in REXX to split clauses across two or more lines. For example: call foo a, b, c can also be written as: call foo a, , b, , c It's easy to forget the second comma when breaking a line in the middle of a function parameter list. ----------------------------------------------------------------- 4. Omitted arguments REXX allows arguments to be omitted. Be careful not to omit arguments by accident, such as including an unnecessary comma: call foo , a, b, c ----------------------------------------------------------------- 5. Undefined variables It is not a syntax error to use undefined variables in REXX. Undefined variables are defined to have their own name translated to uppercase as their value. As a result it is often difficult to find programming errors that are a result of using undefined variables. Some tips: * Add a SIGNAL ON NOVALUE statement to the main section of your programs. This will cause the system to issue a syntax error if you use an undefined variable. * Be careful to include the period when referring to stems. The variables "A" and "A." are unrelated. * Misspelled commands will often be interpreted as undefined variables. The line: sy 'hello' (which should be "say 'hello'") will be interpreted as: "SY" || " " || 'hello' and will be send to the default command host for execution. ----------------------------------------------------------------- 6. Using expressions in the tail of a compound symbol The tail of a compound symbol can only be a simple variable, as in: ok = A.I Literals are not allowed. For example, the following is interpreted as a concatenation between "A." and "name": bad = A."name" Expressions are also not allowed. You must first assign the value of the expression to a symbol and then use that symbol: J = I - 1 ok = A.J ===================================================================== G. Frequently Asked Questions ----------------------------------------------------------- 1. Is REXX better than ? Short answer: Yes. No. Maybe. Does it matter? Long answer: This question wastes a lot of bandwidth in comp.lang.rexx and other newsgroups. Every language has its good points and its bad points. Some people love REXX, some people hate it. Use a language that suits your needs. ----------------------------------------------------------- 2. Why does my OS/2 REXX program run more quickly the second time? When you run a REXX CMD file for the first time, a tokenized version will be stored on disk using the OS/2 extended file attributes. (You can see how big the tokenized version is by using the /N option on the DIR command.) If a tokenized version exists AND the file has not been modified, CMD.EXE will use the tokenized version instead of parsing the source. Note that there is a 64K limit on the size of an extended attribute entry, so very large REXX programs do not benefit from this automatic tokenization. ----------------------------------------------------------- 3. How can I return multiple values from a function? REXX does not provide any support for returning more than a single value from a function. If you wish to return multiple values , you must devise an alternate scheme. A simple solution is to concatenate the values together into a single string and on return from the function use the PARSE instruction or the various string functions to split the string back into its elements. Don't forget that you can use non-printable characters (such as '00'x) to separate the data -- REXX will correctly handle such strings. There may also be other alternatives available to you if you are using an external function library that lets you store data in separate memory pools or in disk files. ----------------------------------------------------------- 4. Why does linein, lineout, charin or charout fail? Most versions of REXX (ARexx is an exception) use implicit file opening. That is, each time you reference a file in a LINEIN, LINEOUT, CHARIN or CHAROUT function, REXX will open the file for reading or writing if the file is not already open. However, some operating systems like DOS and OS/2 impose limits on the number of files that can be open simultaneously, usually around 20 or so. After the limit has been reached, any further attempts to open another file will fail. That is why it is always good practice to close a file when you're done with it. In OS/2 this is done using the STREAM function, as follows: call stream "c:\foo.out", "command", "close" The STREAM function can also be used to open files, query their sizes and seek into the file. Consult your REXX documentation for specific instructions for your interpreter. ----------------------------------------------------------- 5. How do I iterate over all the tails in a stem variable? One of the features REXX lacks is a function to return a list of defined tails. There are external libraries that provide functions to do so, but if that is not an option then the only solution is to maintain your own list of tails in a string and use the PARSE instruction or the WORDS function to traverse the list. ----------------------------------------------------------- 6. How do I REXX-enable my application? REXX-enabling an application means being able to run REXX macros within an application. This information is very system-specific, so the best place to start is with the documentation provided with the REXX interpreter. For OS/2, there are several sources of information. The most basic information is found in the OS/2 Toolkit, which includes the REXXSAA.H header file and the REXX Reference online document. The REXX Report (see above) includes a couple of articles on the subject. Sample source code comes with the OS/2 Toolkit and is also available on rexx.uwaterloo.ca in the directory /pub/os2/vxrexx as VX-REXX Tech Notes #1 and #7 (vxtech01.zip, vxtech07.zip -- neither tech note requires that you own VX-REXX). OS/2 technical conferences such as ColoradOS/2 or the IBM Technical Interchanges often includes sessions on this topic. For ARexx, a book was available from Commodore, but with the latter's demise it is unclear whether the book is still available. ----------------------------------------------------------- 7. How do I do inter-process communication in REXX? Again, this is system-specific. The ARexx interpreter is built on a messaging model, making it very simple to do inter-process communication, but the OS/2 REXX interpreter has no such features, though in some cases queues can be used to achieve the desired effect. ----------------------------------------------------------- 8. How do I use global variables in my REXX programs? The scope of variables is controlled by the PROCEDURE instruction. If a routine is declared with the PROCEDURE instruction, only those variables exposed using the EXPOSE instruction are available to the routine. If no PROCEDURE instruction is used, all of the caller's variables are available to the callee. Here is a simple example: a = 10 b = 20 call first call second call third exit first: say "first -- a is" a "b is" b return second: procedure say "second -- a is" a "b is" b return third: procedure expose a say "third -- a is" a "b is" b b = 30 call first return Running this program yields the following output: first -- a is 10 b is 20 second -- a is A b is B third -- a is 10 b is B first -- a is 10 b is 30 Use the PROCEDURE instruction to keep variables local to a procedure, using EXPOSE to explicitly expose any "global" variables. The only catch is that you have to make sure you expose the variables inside every procedure. One way to define and use global variables is to use a stem called "Globals." and define all your procedures like this: Foo: procedure expose Globals. Then at the top of you program initialize the Globals stem and assign appropriate values to your global variables: Globals. = '' Globals.!NeedToSave = 0 Globals.!TmpDir = "D:\TMP" The tail names in this example are all prefixed with '!', though you could also use an underscore ('_'). This is just a convention used to avoid this kind of problem: Globals.TmpDir = "D:\TMP" call Foo say Globals.TmpDir exit Foo: procedure expose Globals. tmpdir = "foo" Globals.TmpDir = tmpdir return It's a subtle bug that has to do with how REXX interprets stem tails.