Subject: Info-Mac Digest V18 #99 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="Info-Mac-Digest" --Info-Mac-Digest Info-Mac Digest Sat, 14 Jul 01 Volume 18 : Issue 99 Today's Topics: (?) ArcInfo with OS X [*] FileBuddy 6.1.1J - Japanese Version [*] Mitch Power Actions 2.0 [*] SigQuote 1.0 [*] VCD Player 1.5.1 - Full Screen VCD Player - Johnny CN Lee [A] Looking for email body-viewer [Q] getting off heat shield for G3 Lombard [Q] Word security patch Firmware Update Hoses 3rd Party RAM Firmware Update Hoses 3rd Party RAM Graphics Question iMac battery Serious Printing Problem with Virtual PC The Info-Mac Network is a volunteer organization that publishes the Info-Mac Digest and operates the Info-Mac Archive, a large network of FTP sites containing gigabytes of freely distributable Macintosh software. Working with the Info-Mac Digest: * To submit articles to the digest, email . * To subscribe, send email to with the words subscribe info-mac in the message. * To unsubscribe, send email to with the words unsubscribe info-mac in the message. * To change your address, unsubscribe from the old address, then subscribe from the new address. * Please send administrative queries to . Downloading and Submitting Files from the Info-Mac Archive: * A full list of Info-Mac mirror sites is available at: * Search the archive via the MIT HyperArchive at: . * To submit files for the archive, email the binhexed file with a description to . Submissions must be made by the author or with permission of the author. It may take up to a week to process; check mirror sites for the status of new uploads. * To submit files larger than 2 MB, email a description to and then use an FTP client to upload the binhexed file to info-mac.org, using the userid "macgifts" and the password "macgifts". Or, click . Info-Mac volunteers include Adam C. Engst, Demitri Muna, Hugh Lewis, Tom Coradeschi, Shawn Bunn, Christopher Li, Patrik Montgomery, Ed Chambers, and Chris Pepper. America Online donated the main Info-Mac machine . ---------------------------------------------------------------------- --Info-Mac-Digest Content-Type: multipart/digest; boundary="----------------------------" Content-Disposition: attachment; filename="Info-Mac Digest V18 #99" ------------------------------ Date: Fri, 13 Jul 2001 08:14:55 -0400 From: "james f. palmer" To: digest@info-mac.org Subject: (?) ArcInfo with OS X Has anyone tried to run one of the Unix flavors of ArcInfo 8.0.1? Or have you tried ArcView using Virtual PC? Jim Palmer, Essex Junction, VT ------------------------------ Date: 13 Jul 2001 From: ChrisLi@Bridge1.com To: Subject: [*] FileBuddy 6.1.1J - Japanese Version This is the Japanese version of the FileBuddy package. *A Carbon compliant release of File Buddy is currently under development. The first Carbon release of File Buddy will be File Buddy v6.2. File Buddy is quite simply the most powerful and popular high-level file utility available for your Macintosh. File Buddy 6 requires a PowerPC-based Macintosh with System 7.6 or later. File Buddy 5 is available for 68K Macintoshes. *View and edit a wide range of file and folder information in the info window. *Create droplet applications that automatically apply changes to items dropped on them, including the contents of folders. *Find files and folders using an extensive set of search criteria. Enhance file searches with plug-ins that extend file search capabilities. Conveniently perform a wide variety of actions on found items. Make File Buddy your default file finding application using the File Buddy CP control panel. *Modify the names of multiple files at once. For example, remove ".txt" from the names of a group of files. *Much, much more... Changes & Fixes in this version: *In the Find window, the options 'File is not an alias' and 'File is not stationery' no longer keep the search from reporting folders. *Some submenu selections were being ignored because of early code changes for the Carbon release. Fixed. [Archived as /info-mac/disk/file-buddy-611-jp.hqx; 1318 K] ------------------------------ Date: 13 Jul 2001 From: "Mitch Gillen" To: Subject: [*] Mitch Power Actions 2.0 An updated version of Mitch Power Actions. [Archived as /info-mac/gst/grf/pshp/mitch-power-actions-20.hqx; 21 K] ------------------------------ Date: 12 Jul 2001 From: Peter Brigham To: Subject: [*] SigQuote 1.0 SigQuote is a Hypercard stack that makes it easy to append a signature (a 'sig') to your email messages. The feature that makes SigQuote unique is that your sig can contain a different quote each time you use it. You can use a random quote from the list, or you can select a specific quote. With one mouse click, your sig is put on the clipboard for pasting into an email message. Run SigQuote in the background when you are composing email messages and have your sig available instantly! Design your own sig, edit your own list of quotes. Freeware. Copyright 2001 by Peter M. Brigham pmbrig@mediaone.net http://people.ne.mediaone.net/pmbrig/hypercard.html Requires Hypercard 2.3+, System 7.0+ [Archived as /info-mac/comm/inet/mail/sig-quote-10.hqx; 13 K] ------------------------------ Date: 13 Jul 2001 From: Johnny CN Lee To: Subject: [*] VCD Player 1.5.1 - Full Screen VCD Player - Johnny CN Lee VCD Player 1.5.1 (c) Copyright 1997-2001 Johnny CN Lee, All Rights Reserved. info@johnnylee.com http://www.johnnylee.com/ VCD Player simplifies the process of playing video compact discs on your Mac. With most other players, you only get video in a tiny area of your screen, or in an area surrounded by a huge border of some sort. VCD Player smoothes the video playback process and allows you to watch full-screen movies in the MPEG format, without any headache-inducing distortion to make the movie unwatchable. There are various configurable options that control sound and playback, and just as with a sound-only CD player, you can control which track to start watching. VCD Player can remember where you stopped playing the movie after you quit the program, restarted your Mac, or even changed to another disc then changed back. System Requirements - Power PC - QuickTime 2.5 or later - QuickTime MPEG Extension 1.0 or later What's new? - Added Help Screen. [Archived as /info-mac/gst/vcd-player-151.hqx; 169 K] ------------------------------ Date: Fri, 13 Jul 2001 10:13:11 -0400 From: Ken Laskey To: digest@info-mac.org Subject: [A] Looking for email body-viewer >So, I'm on the hunt for a program that will enable me to read an email's >body *without* downloading its attachment(s), if any. My plan is to use >this program as a filtering device; I'd read the bodies, delete the emails >that didn't apply to me, and then use Eudora to download all the remaining >ones. You can do this in Eudora by under Settings/Checking Mail, check Skip messages over xxx K and fill in your favorite xxx. You get the message including an embedded chunk of the attachment up to your set number, but the message is still on the server for full download. The question will be how to delete the message from the server if you decide you don't want it. Good luck, -- Ken Laskey kenneth.j.laskey@saic.com ------------------------------ Date: Fri, 13 Jul 2001 10:06:03 -0400 From: Ken Laskey To: digest@info-mac.org Subject: [Q] getting off heat shield for G3 Lombard I recently bought memory for a G3 Powerbook (Lombard/Bronze) and for the love of me I cannot loosen the screws holding down the heat shield. I'm afraid of damaging the screws and being hosed permanently. Any suggestions? -- Ken Laskey kenneth.j.laskey@saic.com ------------------------------ Date: Fri, 13 Jul 2001 10:02:30 -0400 From: Ken Laskey To: digest@info-mac.org Subject: [Q] Word security patch A while back, I wrote that I downloaded the Word security patch but I wasn't sure what to apply because my Word version number didn't match that listed at the MS Web site. Have people been successfully applying the patch and if so, to what Word versions? TIA, -- Ken Laskey kenneth.j.laskey@saic.com ------------------------------ Date: Fri, 13 Jul 2001 15:54:57 +0200 From: muki pakesch To: "Allan, David (DS)" , Subject: Firmware Update Hoses 3rd Party RAM At 15:12 -0400 10.07.2001, Allan, David (DS) wrote: >I have an iMac DV SE with 256 MB RAM (2 x 128 MB DIMMs). I recently applied >Apple's firmware update and discovered that the 3rd party DIMM is now listed >as "incompatible" by the Apple System Profiler. A call to Apple and to the >RAM supplier confirmed that the firmware update sometimes causes this >problem. I have two options: run a software fix that will alter the EPROM in >my 3rd party DIMM, or return the DIMM for replacement. I don't have the name >of the software fix, but I'm told it's available at VersionTracker. > afaik that's DIMMCHeck and DIMMFirstAid http://www.mactcp.org.nz/EIMSCheck.sit http://www.mactcp.org.nz/dimmfirstaid.html http://www.mactcp.org.nz/DIMMFirstAid.sit hth cheers, muki __________________________________________________________________ | muki pakesch | | | | mailto:mpakesch@t0.or.at http://www.t0.or.at/~mpakesch | |__________________________________________________________________| ------------------------------ Date: Fri, 13 Jul 2001 13:39:54 +0200 From: Eric Collet To: digest@info-mac.org Subject: Firmware Update Hoses 3rd Party RAM There is a small piece of software by Glenn Andersson to check out your RAM prior to firmware uppgrade: ftp://ftp.versiontracker.com/DIMMCheck.sit And look here for more info on the issue: http://www.imacfixit.com/reports/firmware.shtml /Eric ------------------------------ Date: Thu, 12 Jul 2001 15:00:20 +0900 From: "Dr. Paul Fons" To: digest@info-mac.org Subject: Graphics Question I need to plot some 3D data and am looking for an app (hopefully mac based but unix or another platform is OK too). The data is three dimensional (a wavefunction actually) and I would like to plot this in as an aesthetically pleasing a manner as possible. I am aware of programs such as, for example, mathematica, but they really aren't of the graphics quality need here. Perhaps some ray tracing application? Is there source code out there for opengl that I could compile or is there something I could buy? Thanks for any help. Dr. Paul Fons fons@etl.go.jp Photonics Institute Tsukuba, Japan ------------------------------ Date: Fri, 13 Jul 2001 12:21:11 -0400 From: "A.W. Neef" To: "Info-Mac List" Subject: iMac battery In Info-Mac Digest V18 #98 "Gib Henry" wrote: > I know of TWO iMac (DV SE's) whose batteries died within a > couple of months. Both were always plugged in; mine was on > 24/7. I replaced the battery, and within a couple of months > (perhaps sooner, who knows?) it was dead again. > I think there's something wrong with the circuitry design. PRAM batts are a strange lot! I bought my Apple IIgs in 1986. Its 3.6v lithium batt died in 20 months. I was newbie; took to my dealer; he had no replacement. So he opened new IIgs from his inventory, unsoldered batt from motherboard and soldered it to my motherboard. Charged $13! I've been running my IIgs for 13 years now with that repl batt! I then bought a "Nite-Owl" repl batt (no soldering req'd) for future replacement. It's been stored in my refrig for 11 years now. I still do ALL the work I consider really important on my IIgs. Bought Performa-6205CD in 1996. Its batt died in 2 years. Could not find replacement (4.5v alkaline, cube) locally. So I assembled pack from three "AAA" cells. I cut batt lead with terminal from cube, and soldered to my do-it-urself pack. Even glued velcro patch from dead cube onto my pack. Works fine. My newest ... iMacDV-SE is now 11 months old. I'm waiting for its batt to die ... tomorrow?? ... 15 years hence??) I cut power to ALL my computers each night ... or after each session. Two reasons: 1) I worry about lightning and power surges/outages (even tho I have UPS) 2) I put dust cover over each computer. It would trap heat. -- Bill Neef Grass Lake, MI, USA ------------------------------ Date: Fri, 13 Jul 2001 09:58:14 -0400 From: Steven J Gold To: "digest@info-mac.org" Subject: Serious Printing Problem with Virtual PC Nick -- I have experienced the same problems printing to a PostScript printer, not only with the latest version of Virtual-PC, but also with *all* the previous versions. I was able to get around it most of the time by using the "Epson LQ" printer which was preinstalled in VPC as my Windows "default printer", even though the output actually ended up printing on my HP LaserJet PostScript printer! Of course, this means you lose the special features of PostScript printing.... ;-( My final solution to all the printing problems with VPC was to print to a USB-connected printer. At 9:35 PM -0400 7/11/01, Nick Pappas wrote: >I run my business (Lizzyœs Ice Cream) on Macs. When Intuit stopped upgrading >the Mac version of Quickbooks(QB), I installed Virtual PC(VPC) and migrated >to the Windows version of QB. I recently upgraded to VPC version 4 because I >wanted to take advantage of dynamically expanding drive images and the >claimed speed improvements. Since then I have encountered a major problem: >Printing from QB to my Laserwriter IIg via Appletalk over Ethernet >frequently results in a Postscript error that causes Postscript code to be >printed. Among other things, it means we canœt print paychecks very easily. > >Connectixœs response is that this is a known problem and printing more than >5 pages via Print Spooling is unlikely to work. Kind of a major undocumented >shortcoming, donœt you think? One tech support person told me that this >problem was exacerbated by small memory allocations. At his suggestion, I >increased the preferred memory for VPC and the Print Monitor, but this has >had no effect. I was also told that the only way to avoid using Print >Spooling was to have a dedicated printer connected, for example via USB. > >This situation seems preposterous. I am surprised and disappointed in >Connectix. This problem did not exist on my configuration before I installed >VPC Version 4. This is clearly a bug, but Connectix doesnœt seem to want to >deal with it. Has anyone else had to deal with this situation? Have you >found a way out, or do I have to drop back to VPC Version 2 (which is going >to be a major pain in the butt)? > >Nick Pappas -------------------------------- --Info-Mac-Digest-- End of Info-Mac Digest ******************************