patch-2.2.11 linux/arch/mips/sni/int-handler.S

• Lines: 269
• Date: Mon Aug 9 12:04:38 1999
• Orig file: v2.2.10/linux/arch/mips/sni/int-handler.S
• Orig date: Tue Oct 20 13:52:55 1998

diff -u --recursive --new-file v2.2.10/linux/arch/mips/sni/int-handler.S linux/arch/mips/sni/int-handler.S
@@ -1,17 +1,22 @@
-/* $Id: int-handler.S,v 1.4 1998/05/07 14:17:47 ralf Exp $
+/* $Id: int-handler.S,v 1.4 1999/01/04 16:03:58 ralf Exp $
  *
  * SNI RM200 PCI specific interrupt handler code.
  *
  * Copyright (C) 1994 - 1997 by Ralf Baechle
  */
 #include <asm/asm.h>
-#include <linux/config.h>
 #include <asm/mipsconfig.h>
 #include <asm/mipsregs.h>
 #include <asm/regdef.h>
 #include <asm/sni.h>
 #include <asm/stackframe.h>
 
+/* The PCI ASIC has the nasty property that it may delay writes if it is busy.
+   As a consequence from writes that have not graduated when we exit from the
+   interrupt handler we might catch a spurious interrupt.  To avoid this we
+   force the PCI ASIC to graduate all writes by executing a read from the
+   PCI bus.  */
+
 		.set	noreorder
 		.set	noat
 		.align	5
@@ -20,34 +25,38 @@
 		CLI
 		.set	at
 
-		lb	t0,led_cache
-		addiu	t0,1
-		sb	t0,led_cache
-		sb	t0,PCIMT_CSLED
+		/* Blinken light ...  */
+		lb	t0, led_cache
+		addiu	t0, 1
+		sb	t0, led_cache
+		sb	t0, PCIMT_CSLED			# write only register
 		.data
 led_cache:	.byte	0
 		.text
 
-		mfc0	t0,CP0_STATUS
-		mfc0	t1,CP0_CAUSE
-		and	t0,t1
-
-		 andi	t1,t0,0x0800			# hardware interrupt 1
-		bnez	t1,hwint1
-		 andi	t1,t0,0x4000			# hardware interrupt 4
-		bnez	t1,eth_int
-
-		 andi	t1,t0,0x1000			# hardware interrupt 2
-		bnez	t1,hwint2
-		 andi	t1,t0,0x2000			# hardware interrupt 3
-		bnez	t1,hwint3
-		 andi	t1,t0,0x8000			# hardware interrupt 5
-		bnez	t1,hwint5
-		 andi	t1,t0,0x0400			# hardware interrupt 0
-		bnez	t1,hwint0
+		mfc0	t0, CP0_STATUS
+		mfc0	t1, CP0_CAUSE
+		and	t0, t1
+
+		/* The following interrupt dispatch tests for hwint 1 /
+		   EISA bridge first such that the timer interrupt get the
+		   highest priority.  */
+		 andi	t1, t0, 0x0800			# hardware interrupt 1
+		bnez	t1, hwint1
+		 andi	t1, t0, 0x4000			# hardware interrupt 4
+		bnez	t1, hwint4
+
+		 andi	t1, t0, 0x1000			# hardware interrupt 2
+		bnez	t1, hwint2
+		 andi	t1, t0, 0x2000			# hardware interrupt 3
+		bnez	t1, hwint3
+		 andi	t1, t0, 0x8000			# hardware interrupt 5
+		bnez	t1, hwint5
+		 andi	t1, t0, 0x0400			# hardware interrupt 0
+		bnez	t1, hwint0
 		 nop
 
-		j	spurious_interrupt		# Nothing up ...
+		j	return				# spurious interrupt
 		 nop
 
  ##############################################################################
@@ -57,146 +66,61 @@
 
  /* ------------------------------------------------------------------------ */
 
-hwint1:		lbu	t0,PCIMT_CSITPEND
-
-		 andi	t1,t0,0x20
-		bnez	t1,eisa_int
-
-#ifdef CONFIG_SCSI_NCR53C8XX
-		 andi	t1,t0,0x40
-		beqz	t1,scsi_int
-#endif
-		 nop
-
-		j	spurious_interrupt
-		 nop
-
- /* ------------------------------------------------------------------------ */
-
-hwint0:		lbu	t0,PCIMT_CSITPEND
-
-		 andi	t1,t0,0x01
-		beqz	t1,int2
+/* hwint1 deals with EISA and SCSI interrupts.  */
+hwint1:		lbu	s0, PCIMT_CSITPEND
 
-go_spurious:	j	spurious_interrupt		# we got fooled
+		andi	t1, s0, 0x20
+		beqz	t1, 1f
+		 andi	s1, s0, 0x40
+		lbu	a0, PCIMT_INT_ACKNOWLEDGE	# IACK cycle
+		xori	t0, a0, 0xff
+		beqz	t0, 1f				# spurious interrupt?
 		 nop
+		jal	i8259_do_irq			# call real handler
+		 move	a1, sp
 
-eisa_int:	lui	s0,%hi(SNI_PORT_BASE)
-		li	a0,0x0f
-		sb	a0,%lo(SNI_PORT_BASE+0x20)(s0)	# poll command
-		lb	a0,%lo(SNI_PORT_BASE+0x20)(s0)	# read result
-		bgtz	a0,poll_second
-		 andi	a0,7
-		beq	a0,2,poll_second		# cascade?
-		 li	s1,1
-		/*
-		 * Acknowledge first pic
-		 */
-		lb	t2,%lo(SNI_PORT_BASE+0x21)(s0)
-		lui	s4,%hi(cache_21)
-		lb	t0,%lo(cache_21)(s4)
-		sllv	s1,s1,a0
-		or	t0,s1
-		sb	t0,%lo(cache_21)(s4)
-		sb	t0,%lo(SNI_PORT_BASE+0x21)(s0)
-		li	t2,0x20
-		sb	t2,%lo(SNI_PORT_BASE+0x20)(s0)
-		/*
-		 * Now call the real handler
-		 */
+1:		bnez	s1, 1f
+		 li	a0, PCIMT_IRQ_SCSI
 		jal	do_IRQ
-		 move	a1,sp
-		/*
-		 * Unblock first pic
-		 */
-		lbu	t1,%lo(SNI_PORT_BASE+0x21)(s0)
-		lb	t1,%lo(cache_21)(s4)
-		nor	s1,zero,s1
-		and	t1,s1
-		sb	t1,%lo(cache_21)(s4)
-		j	ret_from_irq
-		 sb	t1,%lo(SNI_PORT_BASE+0x21)(s0)
+		 move	a1, sp
 
-		/*
-		 * Cascade interrupt from second PIC
-		 */
-		.align	5
-poll_second:	li	a0,0x0f
-		sb	a0,%lo(SNI_PORT_BASE+0xa0)(s0)	# poll command
-		lb	a0,%lo(SNI_PORT_BASE+0xa0)(s0)	# read result
-		bgtz	a0,go_spurious
-		 andi	a0,7
-		/*
-		 * Acknowledge second pic
-		 */
-		lbu	t2,%lo(SNI_PORT_BASE+0xa1)(s0)
-		lui	s4,%hi(cache_A1)
-		lb	t3,%lo(cache_A1)(s4)
-		sllv	s1,s1,a0
-		or	t3,s1
-		sb	t3,%lo(cache_A1)(s4)
-		sb	t3,%lo(SNI_PORT_BASE+0xa1)(s0)
-		li	t3,0x20
-		sb	t3,%lo(SNI_PORT_BASE+0xa0)(s0)
-		sb	t3,%lo(SNI_PORT_BASE+0x20)(s0)
-		/*
-		 * Now call the real handler
-		 */
-		addiu	a0,8
-		jal	do_IRQ
-		 move	a1,sp
-		/*
-		 * Unblock second pic
-		 */
-		lb	t1,%lo(SNI_PORT_BASE+0xa1)(s0)
-		lb	t1,%lo(cache_A1)(s4)
-		subu	t0,1
-		nor	s1,zero,s1
-		and	t1,t1,s1
-		sb	t1,%lo(cache_A1)(s4)
+1:		lui	t0, %hi(PCIMT_CSITPEND)
 		j	ret_from_irq
-		 sb	t1,%lo(SNI_PORT_BASE+0xa1)(s0)
-
-/*
- * ... check if we were interrupted by the Lance ...
- */
-eth_int:	mfc0	s0,CP0_STATUS
-		ori	t0,s0,0x4000
-		xori	t0,0x4000
-		mtc0	t0,CP0_STATUS
+		 lbu	zero, %lo(PCIMT_CSITPEND)(t0)
 
-		li	a0,PCIMT_IRQ_ETHERNET
-		jal	do_IRQ
-		 move	a1,sp
+ /* ------------------------------------------------------------------------ */
 
-		mtc0	s0,CP0_STATUS
+/* hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
+   button interrupts.  */
+hwint0:		PANIC("Received int0 but no handler yet ...\n")
+1:		j	1b
+		 nop
 
-		j	ret_from_irq
+go_spurious:	j	spurious_interrupt		# we got fooled
 		 nop
 
-#ifdef CONFIG_SCSI_NCR53C8XX
+/* hwint4 is used for only the onboard PCnet 32.  */
+hwint4:		mfc0	s0, CP0_STATUS
+		ori	t0, s0, 0x4000
+		xori	t0, 0x4000
+		mtc0	t0, CP0_STATUS
 
-/*
- * ... check if we were interrupted by the NCR ...
- */
-scsi_int:	li	a0,PCIMT_IRQ_SCSI
+		li	a0, PCIMT_IRQ_ETHERNET
 		jal	do_IRQ
-		 move	a1,sp
-		j	ret_from_irq
-		 nop
-
-#endif /* CONFIG_SCSI_NCR53C8XX */
+		 move	a1, sp
 
-pci_int:	PANIC("Received PCI interrupt but no handler yet ...\n")
-1:		j	1b
-		 nop
+		mtc0	s0, CP0_STATUS
 
-int2:		PANIC("Received int2 but no handler yet ...\n")
-1:		j	1b
+		j	ret_from_irq
 		 nop
 
+/* This interrupt was used for the com1 console on the first prototypes.  */
 hwint2:		PANIC("hwint2 and no handler yet")
+
+/* hwint3 should deal with the PCI A - D interrupts.  */
 hwint3:		PANIC("hwint3 and no handler yet")
+
+/* hwint5 is the r4k count / compare interrupt  */
 hwint5:		PANIC("hwint5 and no handler yet")
 
 		END(sni_rm200_pci_handle_int)