patch-2.2.18 linux/drivers/usb/microtek.c

Next file: linux/drivers/usb/microtek.h
Previous file: linux/drivers/usb/mdc800.c
Back to the patch index
Back to the overall index

diff -u --new-file --recursive --exclude-from /usr/src/exclude v2.2.17/drivers/usb/microtek.c linux/drivers/usb/microtek.c
@@ -0,0 +1,1055 @@
+/* Driver for Microtek Scanmaker X6 USB scanner, and possibly others.
+ *
+ * (C) Copyright 2000 John Fremlin <vii@penguinpowered.com>
+ * (C) Copyright 2000 Oliver Neukum <Oliver.Neukum@lrz.uni-muenchen.de>
+ *
+ * Parts shamelessly stolen from usb-storage and copyright by their
+ * authors. Thanks to Matt Dharm for giving us permission!
+ *
+ * This driver implements a SCSI host controller driver and a USB
+ * device driver. To avoid confusion, all the USB related stuff is
+ * prefixed by mts_usb_ and all the SCSI stuff by mts_scsi_.
+ * 
+ * Microtek (www.microtek.com) did not release the specifications for
+ * their USB protocol to us, so we had to reverse engineer them. We
+ * don't know for which models they are valid.
+ *
+ * The X6 USB has three bulk endpoints, one output (0x1) down which
+ * commands and outgoing data are sent, and two input: 0x82 from which
+ * normal data is read from the scanner (in packets of maximum 32
+ * bytes) and from which the status byte is read, and 0x83 from which
+ * the results of a scan (or preview) are read in up to 64 * 1024 byte
+ * chunks by the Windows driver. We don't know how much it is possible
+ * to read at a time from 0x83.
+ *
+ * It seems possible to read (with URB transfers) everything from 0x82
+ * in one go, without bothering to read in 32 byte chunks.
+ *
+ * There seems to be an optimisation of a further READ implicit if
+ * you simply read from 0x83.
+ *
+ * Guessed protocol:
+ *
+ *	Send raw SCSI command to EP 0x1
+ *
+ *	If there is data to receive:
+ *		If the command was READ datatype=image:
+ *			Read a lot of data from EP 0x83
+ *		Else:
+ *			Read data from EP 0x82
+ *	Else:
+ *		If there is data to transmit:
+ *			Write it to EP 0x1
+ *
+ *	Read status byte from EP 0x82
+ *
+ * References:
+ *
+ * The SCSI command set for the scanner is available from
+ *	ftp://ftp.microtek.com/microtek/devpack/
+ *
+ * Microtek NV sent us a more up to date version of the document. If
+ * you want it, just send mail.
+ *
+ * Status:
+ *
+ *	This driver does not work properly yet.
+ *	Untested with multiple scanners.
+ *	Untested on SMP.
+ *	Untested on UHCI.
+ *
+ * History:
+ *
+ *	20000417 starting history
+ *	20000417 fixed load oops
+ *	20000417 fixed unload oops
+ *	20000419 fixed READ IMAGE detection
+ *	20000424 started conversion to use URBs
+ *	20000502 handled short transfers as errors
+ *	20000513 rename and organisation of functions (john)
+ *	20000513 added IDs for all products supported by Windows driver (john)
+ *	20000514 Rewrote mts_scsi_queuecommand to use URBs (john)
+ *	20000514 Version 0.0.8j
+ *      20000514 Fix reporting of non-existant devices to SCSI layer (john)
+ *	20000514 Added MTS_DEBUG_INT (john)
+ *	20000514 Changed "usb-microtek" to "microtek" for consistency (john)
+ *	20000514 Stupid bug fixes (john)
+ *	20000514 Version 0.0.9j
+ *	20000515 Put transfer context and URB in mts_desc (john)
+ *	20000515 Added prelim turn off debugging support (john)
+ *	20000515 Version 0.0.10j
+ *      20000515 Fixed up URB allocation (clear URB on alloc) (john)
+ *      20000515 Version 0.0.11j
+ *	20000516 Removed unnecessary spinlock in mts_transfer_context (john)
+ *	20000516 Removed unnecessary up on instance lock in mts_remove_nolock (john)
+ *	20000516 Implemented (badly) scsi_abort (john)
+ *	20000516 Version 0.0.12j
+ *      20000517 Hopefully removed mts_remove_nolock quasideadlock (john)
+ *      20000517 Added mts_debug_dump to print ll USB info (john)
+ *	20000518 Tweaks and documentation updates (john)
+ *	20000518 Version 0.0.13j
+ *	20000518 Cleaned up abort handling (john)
+ *	20000523 Removed scsi_command and various scsi_..._resets (john)
+ *	20000523 Added unlink URB on scsi_abort, now OHCI supports it (john)
+ *	20000523 Fixed last tiresome compile warning (john)
+ *	20000523 Version 0.0.14j (though version 0.1 has come out?)
+ *	20000602 Added primitive reset
+ *	20000602 Version 0.2.0
+ *	20000603 various cosmetic changes
+ *	20000603 Version 0.2.1
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/random.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/malloc.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+#include <linux/usb.h>
+#include <linux/proc_fs.h>
+
+#include <asm/atomic.h>
+#include <linux/blk.h>
+#include "../scsi/scsi.h"
+#include "../scsi/hosts.h"
+#include "../scsi/sd.h"
+
+#include "microtek.h"
+
+/* Constants */
+
+#define MTS_ABORT_TIMEOUT HZ /*jiffies*/
+
+
+/* Should we do debugging? */
+
+#define MTS_DO_DEBUG
+
+
+/* USB layer driver interface */
+
+static void *mts_usb_probe(struct usb_device *dev, unsigned int interface);
+static void mts_usb_disconnect(struct usb_device *dev, void *ptr);
+
+static struct usb_driver mts_usb_driver = {
+	"microtek",
+	mts_usb_probe,
+	mts_usb_disconnect,
+	{ NULL, NULL } /* we need no fops. let gcc fill it */
+};
+
+
+/* Internal driver stuff */
+
+#define MTS_VERSION	"0.2.1"
+#define MTS_NAME	"microtek usb (rev " MTS_VERSION "): "
+
+#define MTS_WARNING(x...) \
+	printk( KERN_WARNING MTS_NAME ## x )
+#define MTS_ERROR(x...) \
+	printk( KERN_ERR MTS_NAME ## x )
+#define MTS_INT_ERROR(x...) \
+	MTS_ERROR( ## x )
+#define MTS_MESSAGE(x...) \
+	printk( KERN_INFO MTS_NAME ## x )
+
+#if defined MTS_DO_DEBUG
+
+#define MTS_DEBUG(x...) \
+	printk( KERN_DEBUG MTS_NAME ## x )
+
+#define MTS_DEBUG_GOT_HERE() \
+	MTS_DEBUG("got to %s:%d (%s)\n", __FILE__, (int)__LINE__, __PRETTY_FUNCTION__ )
+#define MTS_DEBUG_INT() \
+	do { MTS_DEBUG_GOT_HERE(); \
+	     MTS_DEBUG("transfer = %x context = %x\n",(int)transfer,(int)context ); \
+	     MTS_DEBUG("status = %x data-length = %x sent = %x\n",(int)transfer->status,(int)context->data_length, (int)transfer->actual_length ); \
+             mts_debug_dump(context->instance);\
+	   } while(0)
+#else
+
+#define MTS_NUL_STATEMENT do { } while(0)
+
+#define MTS_DEBUG(x...)	MTS_NUL_STATEMENT
+#define MTS_DEBUG_GOT_HERE() MTS_NUL_STATEMENT
+#define MTS_DEBUG_INT() MTS_NUL_STATEMENT
+
+#endif
+	
+
+
+#define MTS_INT_INIT()\
+	do {\
+	context = (struct mts_transfer_context*)transfer->context; \
+	if (atomic_read(&context->do_abort)) {\
+		mts_transfer_cleanup(transfer);\
+		return;\
+	}\
+	MTS_DEBUG_INT();\
+	} while (0)
+
+static inline void mts_debug_dump(struct mts_desc* desc) {
+	MTS_DEBUG("desc at 0x%x: halted = %x%x, toggle = %x%x\n",
+		  (int)desc,(int)desc->usb_dev->halted[1],(int)desc->usb_dev->halted[0],
+		  (int)desc->usb_dev->toggle[1],(int)desc->usb_dev->toggle[0]
+		);
+	MTS_DEBUG("ep_out=%x ep_response=%x ep_image=%x\n",
+		  usb_sndbulkpipe(desc->usb_dev,desc->ep_out),
+		  usb_rcvbulkpipe(desc->usb_dev,desc->ep_response),
+		  usb_rcvbulkpipe(desc->usb_dev,desc->ep_image)
+		);
+}
+
+
+static inline void mts_show_command(Scsi_Cmnd *srb)
+{
+	char *what = NULL;
+
+	switch (srb->cmnd[0]) {
+	case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break;
+	case REZERO_UNIT: what = "REZERO_UNIT"; break;
+	case REQUEST_SENSE: what = "REQUEST_SENSE"; break;
+	case FORMAT_UNIT: what = "FORMAT_UNIT"; break;
+	case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break;
+	case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break;
+	case READ_6: what = "READ_6"; break;
+	case WRITE_6: what = "WRITE_6"; break;
+	case SEEK_6: what = "SEEK_6"; break;
+	case READ_REVERSE: what = "READ_REVERSE"; break;
+	case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break;
+	case SPACE: what = "SPACE"; break;
+	case INQUIRY: what = "INQUIRY"; break;
+	case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break;
+	case MODE_SELECT: what = "MODE_SELECT"; break;
+	case RESERVE: what = "RESERVE"; break;
+	case RELEASE: what = "RELEASE"; break;
+	case COPY: what = "COPY"; break;
+	case ERASE: what = "ERASE"; break;
+	case MODE_SENSE: what = "MODE_SENSE"; break;
+	case START_STOP: what = "START_STOP"; break;
+	case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break;
+	case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break;
+	case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break;
+	case SET_WINDOW: what = "SET_WINDOW"; break;
+	case READ_CAPACITY: what = "READ_CAPACITY"; break;
+	case READ_10: what = "READ_10"; break;
+	case WRITE_10: what = "WRITE_10"; break;
+	case SEEK_10: what = "SEEK_10"; break;
+	case WRITE_VERIFY: what = "WRITE_VERIFY"; break;
+	case VERIFY: what = "VERIFY"; break;
+	case SEARCH_HIGH: what = "SEARCH_HIGH"; break;
+	case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break;
+	case SEARCH_LOW: what = "SEARCH_LOW"; break;
+	case SET_LIMITS: what = "SET_LIMITS"; break;
+	case READ_POSITION: what = "READ_POSITION"; break;
+	case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break;
+	case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break;
+	case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break;
+	case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break;
+	case COMPARE: what = "COMPARE"; break;
+	case COPY_VERIFY: what = "COPY_VERIFY"; break;
+	case WRITE_BUFFER: what = "WRITE_BUFFER"; break;
+	case READ_BUFFER: what = "READ_BUFFER"; break;
+	case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break;
+	case READ_LONG: what = "READ_LONG"; break;
+	case WRITE_LONG: what = "WRITE_LONG"; break;
+	case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break;
+	case WRITE_SAME: what = "WRITE_SAME"; break;
+	case READ_TOC: what = "READ_TOC"; break;
+	case LOG_SELECT: what = "LOG_SELECT"; break;
+	case LOG_SENSE: what = "LOG_SENSE"; break;
+	case MODE_SELECT_10: what = "MODE_SELECT_10"; break;
+	case MODE_SENSE_10: what = "MODE_SENSE_10"; break;
+	case MOVE_MEDIUM: what = "MOVE_MEDIUM"; break;
+	case READ_12: what = "READ_12"; break;
+	case WRITE_12: what = "WRITE_12"; break;
+	case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break;
+	case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break;
+	case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break;
+	case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break;
+	case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break;
+	case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break;
+	case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
+	default:
+		MTS_DEBUG("can't decode command\n");
+		goto out;
+		break;
+	}
+	MTS_DEBUG( "Command %s (%d bytes)\n", what, srb->cmd_len);
+
+ out:
+	MTS_DEBUG( "  %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
+	       srb->cmnd[0], srb->cmnd[1], srb->cmnd[2], srb->cmnd[3], srb->cmnd[4], srb->cmnd[5], 
+	       srb->cmnd[6], srb->cmnd[7], srb->cmnd[8], srb->cmnd[9]);
+}
+
+static inline int mts_is_aborting(struct mts_desc* desc) {
+	return (atomic_read(&desc->context.do_abort));
+}
+
+static inline void mts_request_abort(struct mts_desc* desc) {
+	MTS_DEBUG_GOT_HERE();
+	mts_debug_dump(desc);
+	atomic_set(&desc->context.do_abort,1);
+}
+
+static inline void mts_urb_abort(struct mts_desc* desc) {
+	MTS_DEBUG_GOT_HERE();
+	mts_debug_dump(desc);
+	if ( desc->urb.status == USB_ST_URB_PENDING ) {
+		usb_unlink_urb( &desc->urb );
+	}
+}
+
+static inline void mts_wait_abort(struct mts_desc* desc)
+{
+	mts_request_abort(desc);
+
+	while( !atomic_read(&desc->lock.count) ) {
+/* Is there a function to check if the semaphore is locked? */
+		schedule_timeout( MTS_ABORT_TIMEOUT ); 
+		MTS_DEBUG_GOT_HERE();
+		mts_urb_abort(desc);
+	}
+
+}
+
+
+static struct mts_desc * mts_list; /* list of active scanners */
+struct semaphore mts_list_semaphore;
+
+/* Internal list operations */
+
+static
+void mts_remove_nolock( struct mts_desc* to_remove )
+{
+	MTS_DEBUG( "removing 0x%x from list\n",
+		   (int)to_remove );
+
+	mts_wait_abort(to_remove);
+	
+	down( &to_remove->lock );
+
+	MTS_DEBUG_GOT_HERE();
+	
+	if ( to_remove != mts_list ) {
+		MTS_DEBUG_GOT_HERE();
+		if (to_remove->prev && to_remove->next)
+			to_remove->prev->next = to_remove->next;
+	} else {
+		MTS_DEBUG_GOT_HERE();
+		mts_list = to_remove->next;
+		if (mts_list) {
+			MTS_DEBUG_GOT_HERE();
+			mts_list->prev = 0;
+		}
+	}
+		
+	if ( to_remove->next ) {
+		MTS_DEBUG_GOT_HERE();
+		to_remove->next->prev = to_remove->prev;
+	}
+
+	MTS_DEBUG_GOT_HERE();
+	scsi_unregister_module(MODULE_SCSI_HA, &(to_remove->ctempl));
+	
+	kfree( to_remove );
+}
+
+static
+void mts_add_nolock( struct mts_desc* to_add )
+{
+	MTS_DEBUG( "adding 0x%x to list\n", (int)to_add );
+	
+	to_add->prev = 0;
+	to_add->next = mts_list;
+	if ( mts_list ) {
+		mts_list->prev = to_add;
+	}
+			
+	mts_list = to_add;
+}
+		
+
+
+
+/* SCSI driver interface */
+
+/* scsi related functions - dummies for now mostly */
+
+static int mts_scsi_release(struct Scsi_Host *psh)
+{
+	MTS_DEBUG_GOT_HERE();
+	
+	return 0;
+}
+
+static int mts_scsi_abort (Scsi_Cmnd *srb)
+/* interrupt context (!) */
+{
+	struct mts_desc* desc = (struct mts_desc*)(srb->host->hostdata[0]);
+
+	MTS_DEBUG_GOT_HERE();
+	
+	mts_request_abort(desc);
+	mts_urb_abort(desc);
+	
+	return SCSI_ABORT_PENDING;
+}
+
+static int mts_scsi_host_reset (Scsi_Cmnd *srb)
+{
+	struct mts_desc* desc = (struct mts_desc*)(srb->host->hostdata[0]);
+
+	MTS_DEBUG_GOT_HERE();
+	mts_debug_dump(desc);
+
+	usb_reset_device(desc->usb_dev);
+	return 0;  /* RANT why here 0 and not SUCCESS */
+}
+
+/* the core of the scsi part */
+
+/* faking a detection - which can't fail :-) */
+
+static int mts_scsi_detect (struct SHT * sht)
+{
+	/* Whole function stolen from usb-storage */
+	
+	struct mts_desc * desc = (struct mts_desc *)sht->proc_dir;
+	/* What a hideous hack! */
+	  
+	char local_name[48];
+
+	MTS_DEBUG_GOT_HERE();
+
+	/* set up the name of our subdirectory under /proc/scsi/ */
+	sprintf(local_name, "microtek-%d", desc->host_number);
+	sht->name = kmalloc (strlen(local_name) + 1, GFP_KERNEL);
+	/* FIXME: where is this freed ? */
+
+	if (!sht->name) {
+		MTS_ERROR( "unable to allocate memory for proc interface!!\n" );
+		return 0;
+	}
+	
+	strcpy((char *)sht->name, local_name);
+
+ 	sht->proc_dir = NULL;
+
+	/* In host->hostdata we store a pointer to desc */
+	desc->host = scsi_register(sht, sizeof(desc));
+	desc->host->hostdata[0] = (unsigned long)desc;
+/* FIXME: what if sizeof(void*) != sizeof(unsigned long)? */ 
+
+	return 1;
+}
+
+
+
+/* Main entrypoint: SCSI commands are dispatched to here */
+
+
+
+static
+int mts_scsi_queuecommand (Scsi_Cmnd *srb, mts_scsi_cmnd_callback callback );
+
+static void mts_transfer_cleanup( struct urb *transfer );
+
+
+inline static
+void mts_int_submit_urb (struct urb* transfer,
+			int pipe,
+			void* data,
+			unsigned length,
+			mts_usb_urb_callback callback )
+/* Interrupt context! */
+
+/* Holding transfer->context->lock! */
+{
+	int res;
+	struct mts_transfer_context* context;
+	
+	MTS_INT_INIT();
+	
+	FILL_BULK_URB(transfer,
+		      context->instance->usb_dev,
+		      pipe,
+		      data,
+		      length,
+		      callback,
+		      context
+		);
+
+/*	transfer->transfer_flags = USB_DISABLE_SPD;*/
+	transfer->transfer_flags = USB_ASYNC_UNLINK;
+	transfer->status = 0;
+	transfer->timeout = 100;
+
+	res = usb_submit_urb( transfer );
+	if ( res ) {
+		MTS_ERROR( "could not submit URB! Error was %d\n",(int)res );
+		context->srb->result = DID_ERROR << 16;
+		context->state = mts_con_error;
+		mts_transfer_cleanup(transfer);
+	}
+	return;
+}
+
+
+static void mts_transfer_cleanup( struct urb *transfer )
+/* Interrupt context! */
+{
+	struct mts_transfer_context* context = (struct mts_transfer_context*)transfer->context;
+	
+	up( &context->instance->lock );
+	if ( context->final_callback )
+		context->final_callback(context->srb);
+
+}
+
+static void mts_transfer_done( struct urb *transfer )
+{
+	struct mts_transfer_context* context;
+
+	MTS_INT_INIT();
+
+	context->srb->result &= MTS_MAX_CHUNK_MASK;
+	context->srb->result |= (unsigned)context->status<<1;
+
+	mts_transfer_cleanup(transfer);
+
+	return;
+}
+
+
+static void mts_get_status( struct urb *transfer )
+/* Interrupt context! */
+{
+	struct mts_transfer_context* context;
+
+	MTS_INT_INIT();
+
+	context->state = mts_con_status;
+	
+	mts_int_submit_urb(transfer,
+			   usb_rcvbulkpipe(context->instance->usb_dev,
+					   context->instance->ep_response),
+			   &context->status,
+			   1,
+			   mts_transfer_done );
+	
+	
+	return;
+}
+
+static void mts_data_done( struct urb* transfer )
+/* Interrupt context! */
+{
+	struct mts_transfer_context* context;
+
+	MTS_INT_INIT();
+
+	if ( context->data_length != transfer->actual_length ) {
+#if 0
+		context->srb->resid = context->data_length - transfer->actual_length;
+#else
+		printk(KERN_WARNING "microtek.c: Don't know how to handle resid on 2.2 kernels\n");
+#endif
+	} else if ( transfer->status ) {
+		context->srb->result = DID_ERROR<<16;
+	}
+
+	mts_get_status(transfer);
+
+	return;
+}
+
+
+static void mts_command_done( struct urb *transfer )
+/* Interrupt context! */
+{
+	struct mts_transfer_context* context;
+
+	MTS_INT_INIT();
+
+	if ( transfer->status ) {
+		context->srb->result = DID_ERROR<<16;
+		mts_transfer_cleanup(transfer);
+		
+		return;
+	}
+	
+	if ( context->data ) {
+		context->state = mts_con_data;
+		mts_int_submit_urb(transfer,
+				   context->data_pipe,
+				   context->data,
+				   context->data_length,
+				   mts_data_done);
+	} else mts_get_status(transfer);
+	
+	return;
+}
+
+
+
+	static const u8 mts_read_image_sig[] = { 0x28, 00, 00, 00 };
+	static const u8 mts_read_image_sig_len = 4;
+	static const unsigned char mts_direction[256/8] = {
+		0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77, 
+		0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+	};
+
+
+#define MTS_DIRECTION_IS_IN(x) ((mts_direction[x>>3] >> (x & 7)) & 1)
+
+static void
+mts_build_transfer_context( Scsi_Cmnd *srb, struct mts_desc* desc )
+{
+
+	int pipe;
+
+
+	MTS_DEBUG_GOT_HERE();
+
+	desc->context.instance = desc;
+	desc->context.srb = srb;
+	desc->context.state = mts_con_command;
+	atomic_set(&desc->context.do_abort,0);
+	
+	if ( !srb->bufflen ){
+		desc->context.data = 0;
+		desc->context.data_length = 0;
+		return;
+	} else {
+		desc->context.data = srb->buffer;
+		desc->context.data_length = srb->bufflen;
+	}
+	
+	/* can't rely on srb->sc_data_direction */
+
+	/* Brutally ripped from usb-storage */
+
+	if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len )
+) { 		pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image);
+		MTS_DEBUG( "transfering from desc->ep_image == %d\n",
+			   (int)desc->ep_image );
+	} else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) {
+			pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response);
+			MTS_DEBUG( "transfering from desc->ep_response == %d\n",
+				   (int)desc->ep_response);
+	} else {
+		MTS_DEBUG("transfering to desc->ep_out == %d\n",
+			  (int)desc->ep_out);
+		pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out);
+	}
+	desc->context.data_pipe = pipe;
+}
+
+
+static
+int mts_scsi_queuecommand( Scsi_Cmnd *srb, mts_scsi_cmnd_callback callback )
+{
+	struct mts_desc* desc = (struct mts_desc*)(srb->host->hostdata[0]);
+	int err = 0;
+	int res;
+
+	MTS_DEBUG_GOT_HERE();
+	mts_show_command(srb);
+	mts_debug_dump(desc);
+	
+	if ( srb->device->lun || srb->device->id || srb->device->channel ) {
+
+		MTS_DEBUG("Command to LUN=%d ID=%d CHANNEL=%d from SCSI layer\n",(int)srb->device->lun,(int)srb->device->id, (int)srb->device->channel );
+		
+		MTS_DEBUG("this device doesn't exist\n");
+
+		srb->result = DID_BAD_TARGET << 16;
+
+		if(callback)
+			callback(srb);
+
+		goto out;
+	}	
+
+	down(&desc->lock);
+
+	MTS_DEBUG_GOT_HERE();
+	mts_show_command(srb);
+	
+
+	FILL_BULK_URB(&desc->urb,
+		      desc->usb_dev,
+		      usb_sndbulkpipe(desc->usb_dev,desc->ep_out),
+		      srb->cmnd,
+		      srb->cmd_len,
+		      mts_command_done,
+		      &desc->context
+		      );
+	
+		
+	mts_build_transfer_context( srb, desc );
+	desc->context.final_callback = callback;
+	desc->urb.timeout = 100;
+	desc->urb.transfer_flags = USB_ASYNC_UNLINK;
+	
+/*	desc->urb.transfer_flags = USB_DISABLE_SPD;*/
+
+	res=usb_submit_urb(&desc->urb);
+	
+	if(res){
+		MTS_ERROR("error %d submitting URB\n",(int)res);
+		srb->result = DID_ERROR << 16;
+
+		if(callback)
+			callback(srb);
+
+		goto out;
+	}	
+	
+	MTS_DEBUG_GOT_HERE();
+
+ out:
+	return err;
+}
+/*
+ * this defines our 'host'
+ */
+
+/* NOTE: This is taken from usb-storage, should be right. */
+
+
+static Scsi_Host_Template mts_scsi_host_template = {
+	name:           "microtek",
+	detect:		mts_scsi_detect,
+	release:	mts_scsi_release,
+	command:	0,
+	queuecommand:	mts_scsi_queuecommand,
+
+	eh_abort_handler:	mts_scsi_abort,
+	eh_device_reset_handler:0,
+	eh_bus_reset_handler:	0,
+	eh_host_reset_handler:	mts_scsi_host_reset,
+
+	can_queue:		1,
+	this_id:		-1,
+	cmd_per_lun:		1,
+	present:		0,
+	unchecked_isa_dma:	FALSE,
+	use_clustering:		FALSE,
+	use_new_eh_code:	TRUE,
+	emulated:		TRUE
+};
+
+
+/* USB layer driver interface implementation */
+
+static void mts_usb_disconnect (struct usb_device *dev, void *ptr)
+{
+	struct mts_desc* to_remove = (struct mts_desc*)ptr;
+	
+	MTS_DEBUG_GOT_HERE();
+
+	/* leave the list - lock it */
+	down(&mts_list_semaphore);
+
+	mts_remove_nolock(to_remove);
+
+	up(&mts_list_semaphore);
+}
+
+struct vendor_product
+{
+	u16 idVendor;
+	u16 idProduct;
+	char* name;
+	enum
+	{
+		mts_sup_unknown=0,
+		mts_sup_alpha,
+		mts_sup_full
+	}
+	support_status;
+} ;
+
+
+/* These are taken from the msmUSB.inf file on the Windows driver CD */
+const static struct vendor_product mts_supported_products[] =
+{
+	{
+		0x4ce, 0x300,"Phantom 336CX",mts_sup_unknown
+	},
+	{
+		0x5da, 0x94,"Phantom 336CX",mts_sup_unknown
+	},
+	{
+		0x5da, 0x99,"Scanmaker X6",mts_sup_alpha
+	},
+	{
+		0x5da, 0x9a,"Phantom C6",mts_sup_unknown
+	},
+	{
+		0x5da, 0xa0,"Phantom 336CX",mts_sup_unknown
+	},
+	{
+		0x5da, 0xa3,"ScanMaker V6USL",mts_sup_unknown
+	},
+	{
+		0x5da, 0x80a3,"ScanMaker V6USL",mts_sup_unknown
+	},
+	{
+		0x5da, 0x80ac,"Scanmaker V6UL",mts_sup_unknown
+	}
+}
+;
+const static struct vendor_product* mts_last_product = &mts_supported_products[ sizeof(mts_supported_products) / sizeof(struct vendor_product) ];
+		/* Must never be derefed, points to one after last entry */
+
+
+static void * mts_usb_probe (struct usb_device *dev, unsigned int interface)
+{
+	int i;
+	int result;
+	int ep_out = -1;
+	int ep_in_set[3]; /* this will break if we have more than three endpoints
+			   which is why we check */
+	int *ep_in_current = ep_in_set;
+	
+	struct mts_desc * new_desc;
+	struct vendor_product const* p;
+
+	/* the altsettting 0 on the interface we're probing */
+	struct usb_interface_descriptor *altsetting;
+
+	MTS_DEBUG_GOT_HERE();
+	MTS_DEBUG( "usb-device descriptor at %x\n", (int)dev );
+	
+	MTS_DEBUG( "product id = 0x%x, vendor id = 0x%x\n",
+		   (int)dev->descriptor.idProduct,
+		   (int)dev->descriptor.idVendor );
+
+	MTS_DEBUG_GOT_HERE();
+	
+	/* checking IDs */
+	for( p = mts_supported_products; p != mts_last_product; p++ )
+		if ( dev->descriptor.idVendor == p->idVendor &&
+		     dev->descriptor.idProduct == p->idProduct )
+			goto is_supported;
+		else
+			MTS_DEBUG( "doesn't appear to be model %s\n", p->name );
+
+	MTS_DEBUG( "returning NULL: unsupported\n" );
+	
+	return NULL;
+	
+ is_supported:
+
+	MTS_DEBUG_GOT_HERE();
+
+	MTS_DEBUG( "found model %s\n", p->name );
+	if ( p->support_status != mts_sup_full )
+		MTS_MESSAGE( "model %s is not known to be fully supported, reports welcome!\n",
+			     p->name );
+	
+	/* the altsettting 0 on the interface we're probing */
+	altsetting =
+		&(dev->actconfig->interface[interface].altsetting[0]);	
+
+	
+	/* Check if the config is sane */
+
+	if ( altsetting->bNumEndpoints != MTS_EP_TOTAL ) {
+		MTS_WARNING( "expecting %d got %d endpoints! Bailing out.\n",
+			     (int)MTS_EP_TOTAL, (int)altsetting->bNumEndpoints );
+		return NULL;
+	}
+
+	for( i = 0; i < altsetting->bNumEndpoints; i++ ) {
+		if ((altsetting->endpoint[i].bmAttributes & 
+		     USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) {
+			
+			MTS_WARNING( "can only deal with bulk endpoints; endpoint %d is not bulk.\n",
+			     (int)altsetting->endpoint[i].bEndpointAddress );
+		} else {
+			if (altsetting->endpoint[i].bEndpointAddress & 
+			    USB_DIR_IN)
+				*ep_in_current++
+					= altsetting->endpoint[i].bEndpointAddress &
+					USB_ENDPOINT_NUMBER_MASK;
+			else {
+				if ( ep_out != -1 ) {
+					MTS_WARNING( "can only deal with one output endpoints. Bailing out." );
+					return NULL;
+				}
+		
+				ep_out = altsetting->endpoint[i].bEndpointAddress &
+					USB_ENDPOINT_NUMBER_MASK;
+			}
+		}
+		
+	}
+	
+
+	if ( ep_out == -1 ) {
+		MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
+		return NULL;
+	}
+	
+	
+	/* I don't understand the following fully (it's from usb-storage) -- John */
+
+	/* set the interface -- STALL is an acceptable response here */
+	result = usb_set_interface(dev, altsetting->bInterfaceNumber, 0);
+	
+	MTS_DEBUG("usb_set_interface returned %d.\n",result);
+	switch( result )
+	{
+	case 0: /* no error */
+		break;
+		
+	case -EPIPE:
+		usb_clear_halt(dev, usb_sndctrlpipe(dev, 0));
+		MTS_DEBUG( "clearing clearing stall on control interface\n" );
+		break;
+		
+	default:
+		MTS_DEBUG( "unknown error %d from usb_set_interface\n",
+			(int)result );
+ 		return NULL;
+	}
+	
+	
+	/* allocating a new descriptor */
+	new_desc = (struct mts_desc *)kmalloc(sizeof(struct mts_desc), GFP_KERNEL);
+	if (new_desc == NULL)
+	{
+		MTS_ERROR("couldn't allocate scanner desc, bailing out!\n");
+		return NULL;
+	}
+
+	/* As done by usb_alloc_urb */
+	memset( new_desc, 0, sizeof(*new_desc) );
+	spin_lock_init(&new_desc->urb.lock);
+	
+		
+	/* initialising that descriptor */
+	new_desc->usb_dev = dev;
+	new_desc->interface = interface;
+
+	init_MUTEX(&new_desc->lock);
+
+	if(mts_list){
+		new_desc->host_number = mts_list->host_number+1;
+	} else {
+		new_desc->host_number = 0;
+	}
+	
+	/* endpoints */
+	
+	new_desc->ep_out = ep_out;
+	new_desc->ep_response = ep_in_set[0];
+	new_desc->ep_image = ep_in_set[1];
+	
+
+	if ( new_desc->ep_out != MTS_EP_OUT )
+		MTS_WARNING( "will this work? Command EP is not usually %d\n",
+			     (int)new_desc->ep_out );
+
+	if ( new_desc->ep_response != MTS_EP_RESPONSE )
+		MTS_WARNING( "will this work? Response EP is not usually %d\n",
+			     (int)new_desc->ep_response );
+
+	if ( new_desc->ep_image != MTS_EP_IMAGE )
+		MTS_WARNING( "will this work? Image data EP is not usually %d\n",
+			     (int)new_desc->ep_image );
+
+	
+	/* Initialize the host template based on the default one */
+	memcpy(&(new_desc->ctempl), &mts_scsi_host_template, sizeof(mts_scsi_host_template)); 	
+	/* HACK from usb-storage - this is needed for scsi detection */
+	(struct mts_desc *)new_desc->ctempl.proc_dir = new_desc; /* FIXME */
+	
+	MTS_DEBUG("registering SCSI module\n");
+	
+	new_desc->ctempl.module = THIS_MODULE;
+	result = scsi_register_module(MODULE_SCSI_HA, &(new_desc->ctempl));	
+	/* Will get hit back in microtek_detect by this func */
+	if ( result )
+	{
+		MTS_ERROR( "error %d from scsi_register_module! Help!\n",
+			   (int)result );
+
+		/* FIXME: need more cleanup? */
+		kfree( new_desc );
+		return NULL;
+	}
+	MTS_DEBUG_GOT_HERE();
+
+	/* FIXME: the bomb is armed, must the host be registered under lock ? */
+	/* join the list - lock it */
+	down(&mts_list_semaphore);
+
+	mts_add_nolock( new_desc );
+	
+	up(&mts_list_semaphore);
+	
+	
+	MTS_DEBUG("completed probe and exiting happily\n");
+	
+	return (void *)new_desc;
+}
+
+
+
+/* get us noticed by the rest of the kernel */
+
+int __init microtek_drv_init(void)
+{
+	int result;
+	
+	MTS_DEBUG_GOT_HERE();
+	init_MUTEX(&mts_list_semaphore);
+
+	if ((result = usb_register(&mts_usb_driver)) < 0) {
+		MTS_DEBUG("usb_register returned %d\n", result );
+		return -1;
+	} else {
+		MTS_DEBUG("driver registered.\n");
+	}
+	
+	return 0;
+}
+
+void __exit microtek_drv_exit(void)
+{
+	struct mts_desc* next;
+	
+	MTS_DEBUG_GOT_HERE();
+
+	usb_deregister(&mts_usb_driver);
+
+	down(&mts_list_semaphore);
+
+	while (mts_list) {
+		/* keep track of where the next one is */
+		next = mts_list->next;
+
+		mts_remove_nolock( mts_list );
+
+		/* advance the list pointer */
+		mts_list = next;
+	}
+	
+	up(&mts_list_semaphore);
+}
+
+module_init(microtek_drv_init);
+module_exit(microtek_drv_exit);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)