patch-2.2.18 linux/drivers/usb/ohci-root-hub.h
Next file: linux/drivers/usb/ohci.c
Previous file: linux/drivers/usb/ohci-root-hub.c
Back to the patch index
Back to the overall index
- Lines: 72
- Date:
Thu Jan 1 01:00:00 1970
- Orig file:
v2.2.17/drivers/usb/ohci-root-hub.h
- Orig date:
Fri Apr 21 12:46:37 2000
diff -u --new-file --recursive --exclude-from /usr/src/exclude v2.2.17/drivers/usb/ohci-root-hub.h linux/drivers/usb/ohci-root-hub.h
@@ -1,71 +0,0 @@
-/*
- * HCD (OHCI) Virtual Root Hub Protocol for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber (weissg@vienna.at)
- *
- * The Root Hub is build into the HC (UHCI or OHCI) hardware.
- * This piece of code lets it look like it resides on the bus
- * like the other hubs.
- * (for anyone who wants to do a control operation on the root hub)
- *
- * v1.0 1999/04/27
- * ohci-root-hub.h
- *
- */
-
-/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
-
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
-
-
-/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
-
-/* Our Vendor Specific feature */
-#define RH_REMOVE_EP 0x00
-
-
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
-
-#define min(a,b) (((a)<(b))?(a):(b))
-
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)