patch-2.3.48 linux/arch/mips/ddb5074/irq.c
Next file: linux/arch/mips/ddb5074/nile4.c
Previous file: linux/arch/mips/ddb5074/int-handler.S
Back to the patch index
Back to the overall index
- Lines: 231
- Date:
Thu Feb 24 22:52:30 2000
- Orig file:
v2.3.47/linux/arch/mips/ddb5074/irq.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.47/linux/arch/mips/ddb5074/irq.c linux/arch/mips/ddb5074/irq.c
@@ -0,0 +1,230 @@
+/*
+ * arch/mips/ddb5074/irq.c -- NEC DDB Vrc-5074 interrupt routines
+ *
+ * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ * Sony Suprastructure Center Europe (SUPC-E), Brussels
+ *
+ * $Id: irq.c,v 1.1 2000/01/26 00:07:44 ralf Exp $
+ */
+
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/ptrace.h>
+#include <asm/nile4.h>
+#include <asm/ddb5074.h>
+
+
+extern void __init i8259_init(void);
+extern void i8259_disable_irq(unsigned int irq_nr);
+extern void i8259_enable_irq(unsigned int irq_nr);
+
+extern asmlinkage void ddbIRQ(void);
+extern asmlinkage void i8259_do_irq(int irq, struct pt_regs *regs);
+extern asmlinkage void do_IRQ(int irq, struct pt_regs * regs);
+
+
+static void no_action(int cpl, void *dev_id, struct pt_regs *regs)
+{
+}
+
+
+#define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */
+#define M1543_PNP_INDEX 0x03f0 /* PnP Index Port */
+#define M1543_PNP_DATA 0x03f1 /* PnP Data Port */
+
+#define M1543_PNP_ALT_CONFIG 0x0370 /* Alternative PnP Config Port */
+#define M1543_PNP_ALT_INDEX 0x0370 /* Alternative PnP Index Port */
+#define M1543_PNP_ALT_DATA 0x0371 /* Alternative PnP Data Port */
+
+#define M1543_INT1_MASTER_CTRL 0x0020 /* INT_1 (master) Control Register */
+#define M1543_INT1_MASTER_MASK 0x0021 /* INT_1 (master) Mask Register */
+
+#define M1543_INT1_SLAVE_CTRL 0x00a0 /* INT_1 (slave) Control Register */
+#define M1543_INT1_SLAVE_MASK 0x00a1 /* INT_1 (slave) Mask Register */
+
+#define M1543_INT1_MASTER_ELCR 0x04d0 /* INT_1 (master) Edge/Level Control */
+#define M1543_INT1_SLAVE_ELCR 0x04d1 /* INT_1 (slave) Edge/Level Control */
+
+
+static void m1543_irq_setup(void)
+{
+ /*
+ * The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13. Not all
+ * the possible IO sources in the M1543 are in use by us. We will
+ * use the following mapping:
+ *
+ * IRQ1 - keyboard (default set by M1543)
+ * IRQ3 - reserved for UART B (default set by M1543) (note that
+ * the schematics for the DDB Vrc-5074 board seem to
+ * indicate that IRQ3 is connected to the DS1386
+ * watchdog timer interrupt output so we might have
+ * a conflict)
+ * IRQ4 - reserved for UART A (default set by M1543)
+ * IRQ5 - parallel (default set by M1543)
+ * IRQ8 - DS1386 time of day (RTC) interrupt
+ * IRQ12 - mouse
+ */
+
+ /*
+ * Assing mouse interrupt to IRQ12
+ */
+
+ /* Enter configuration mode */
+ outb(0x51, M1543_PNP_CONFIG);
+ outb(0x23, M1543_PNP_CONFIG);
+
+ /* Select logical device 7 (Keyboard) */
+ outb(0x07, M1543_PNP_INDEX);
+ outb(0x07, M1543_PNP_DATA);
+
+ /* Select IRQ12 */
+ outb(0x72, M1543_PNP_INDEX);
+ outb(0x0c, M1543_PNP_DATA);
+
+ /* Leave configration mode */
+ outb(0xbb, M1543_PNP_CONFIG);
+
+
+ /* Initialize the 8259 PIC in the M1543 */
+ i8259_init();
+
+ /* Enable the interrupt cascade */
+ nile4_enable_irq(NILE4_INT_INTE);
+
+ request_region(M1543_PNP_CONFIG, 2, "M1543 config");
+ request_region(M1543_INT1_MASTER_ELCR, 2, "pic ELCR");
+}
+
+static void nile4_irq_setup(void)
+{
+ int i;
+
+ /* Map all interrupts to CPU int #0 */
+ nile4_map_irq_all(0);
+
+ /* PCI INTA#-E# must be level triggered */
+ nile4_set_pci_irq_level_or_edge(0, 1);
+ nile4_set_pci_irq_level_or_edge(1, 1);
+ nile4_set_pci_irq_level_or_edge(2, 1);
+ nile4_set_pci_irq_level_or_edge(3, 1);
+ nile4_set_pci_irq_level_or_edge(4, 1);
+
+ /* PCI INTA#-D# must be active low, INTE# must be active high */
+ nile4_set_pci_irq_polarity(0, 0);
+ nile4_set_pci_irq_polarity(1, 0);
+ nile4_set_pci_irq_polarity(2, 0);
+ nile4_set_pci_irq_polarity(3, 0);
+ nile4_set_pci_irq_polarity(4, 1);
+
+ for (i = 0; i < 16; i++)
+ nile4_clear_irq(i);
+
+ /* Enable CPU int #0 */
+ nile4_enable_irq_output(0);
+
+ request_mem_region(NILE4_BASE, NILE4_SIZE, "Nile 4");
+}
+
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+
+static struct irqaction irq2 = { no_action, 0, 0, "cascade", NULL, NULL };
+
+
+void disable_irq(unsigned int irq_nr)
+{
+ if (is_i8259_irq(irq_nr))
+ i8259_disable_irq(irq_nr);
+ else
+ nile4_disable_irq(irq_to_nile4(irq_nr));
+}
+
+void enable_irq(unsigned int irq_nr)
+{
+ if (is_i8259_irq(irq_nr))
+ i8259_enable_irq(irq_nr);
+ else
+ nile4_enable_irq(irq_to_nile4(irq_nr));
+}
+
+int table[16] = { 0, };
+
+void ddb_local0_irqdispatch(struct pt_regs *regs)
+{
+ u32 mask;
+ int nile4_irq;
+#if 1
+ volatile static int nesting = 0;
+ if (nesting++ == 0)
+ ddb5074_led_d3(1);
+ ddb5074_led_hex(nesting < 16 ? nesting : 15);
+#endif
+
+ mask = nile4_get_irq_stat(0);
+ nile4_clear_irq_mask(mask);
+
+ /* Handle the timer interrupt first */
+ if (mask & (1<<NILE4_INT_GPT)) {
+ nile4_disable_irq(NILE4_INT_GPT);
+ do_IRQ(nile4_to_irq(NILE4_INT_GPT), regs);
+ nile4_enable_irq(NILE4_INT_GPT);
+ mask &= ~(1<<NILE4_INT_GPT);
+ }
+ for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1)
+ if (mask & 1) {
+ nile4_disable_irq(nile4_irq);
+ if (nile4_irq == NILE4_INT_INTE) {
+ int i8259_irq = nile4_i8259_iack();
+ i8259_do_irq(i8259_irq, regs);
+ } else
+ do_IRQ(nile4_to_irq(nile4_irq), regs);
+ nile4_enable_irq(nile4_irq);
+ }
+
+#if 1
+ if (--nesting == 0)
+ ddb5074_led_d3(0);
+ ddb5074_led_hex(nesting < 16 ? nesting : 15);
+#endif
+}
+
+void ddb_local1_irqdispatch(void)
+{
+ printk("ddb_local1_irqdispatch called\n");
+}
+
+void ddb_buserror_irq(void)
+{
+ printk("ddb_buserror_irq called\n");
+}
+
+void ddb_8254timer_irq(void)
+{
+ printk("ddb_8254timer_irq called\n");
+}
+
+void __init ddb_irq_setup(void)
+{
+#ifdef CONFIG_REMOTE_DEBUG
+ if (remote_debug)
+ set_debug_traps();
+ breakpoint(); /* you may move this line to whereever you want :-) */
+#endif
+ request_region(0x20, 0x20, "pic1");
+ request_region(0xa0, 0x20, "pic2");
+ i8259_setup_irq(2, &irq2);
+
+ nile4_irq_setup();
+ m1543_irq_setup();
+
+ set_except_vector(0, ddbIRQ);
+}
+
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)