Date: Thu, 10 Aug 1995 08:37:46 -1000 From: hellionhse@aol.com (HellionHse) Message-Id: <40djlq$3g5@newsbf02.news.aol.com> Organization: America Online, Inc. (1-800-827-6364) Subject: Want to start bugging in Pittsburgh Pa. HELP I'm intrested in building my own buggy and flying here in Pgh PA (very hilly, few big open flat fields). Can anyone help with plans,books,advice? I now fly a RevII, a small 2 line and an Indian Fighter(the last one poorly) Thanks Gary = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Date: Thu, 10 Aug 1995 18:44:20 -1000 From: windwiz@west.net (Dan Rubesh) Message-Id: <40en74$leu@acme.sb.west.net> Organization: WestNet Communications Subject: Re: Want to start bugging in Pittsburgh Pa. HELP In article <40djlq$3g5@newsbf02.news.aol.com>, HellionHse wrote: >I'm intrested in building my own buggy and flying here in Pgh PA (very >hilly, few big open flat fields). Can anyone help with plans,books,advice? >I now fly a RevII, a small 2 line and an Indian Fighter(the last one >poorly) Check your local kite shop (or one of us mail-order dealers on the net) for a copy of Stunt Kites II.. There are some buggy plans there that should help with your buggy project as well as plans for some engines to power the buggy with.. You might also want to invest in a copy of the Kite 2.0 program that will give you template plots for many of the kites in SKII.. It _is_ possible to buggy behind a RevII, given enough wind (25+ mph) and a hard surface, but I wouldn't recommend it as an all-around buggy engine.. :-) Ob. Disclaimer: I am a sport kite dealer and carry some of the above mentioned product(s). As such, my opinions may tend to be somewhat subjective. -- -- Dan Rubesh GO Wind Wizard windwiz@west.net FLY A P.O. Box 5747 danr@crash.cts.com SPORT KITE Ventura, CA 93005 (805) 659-5769 (voice & fax) T.B.N.K. Member: AKA & KTA = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =