HTTPBIS D. Schinazi Internet-Draft Google LLC Intended status: Standards Track D. Oliver Expires: 23 March 2025 Guardian Project J. Hoyland Cloudflare Inc. 19 September 2024 The Concealed HTTP Authentication Scheme draft-ietf-httpbis-unprompted-auth-12 Abstract Most HTTP authentication schemes are probeable in the sense that it is possible for an unauthenticated client to probe whether an origin serves resources that require authentication. It is possible for an origin to hide the fact that it requires authentication by not generating Unauthorized status codes, however that only works with non-cryptographic authentication schemes: cryptographic signatures require a fresh nonce to be signed. Prior to this document, there was no existing way for the origin to share such a nonce without exposing the fact that it serves resources that require authentication. This document defines a new non-probeable cryptographic authentication scheme. About This Document This note is to be removed before publishing as an RFC. The latest revision of this draft can be found at https://httpwg.org/ http-extensions/draft-ietf-httpbis-unprompted-auth.html. Status information for this document may be found at https://datatracker.ietf.org/doc/draft-ietf-httpbis-unprompted-auth/. Discussion of this document takes place on the HTTP Working Group mailing list (mailto:ietf-http-wg@w3.org), which is archived at https://lists.w3.org/Archives/Public/ietf-http-wg/. Working Group information can be found at https://httpwg.org/. Source for this draft and an issue tracker can be found at https://github.com/httpwg/http-extensions/labels/unprompted-auth. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Schinazi, et al. Expires 23 March 2025 [Page 1] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 23 March 2025. Copyright Notice Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1. Conventions and Definitions . . . . . . . . . . . . . . . 3 2. The Concealed Authentication Scheme . . . . . . . . . . . . . 4 3. Client Handling . . . . . . . . . . . . . . . . . . . . . . . 4 3.1. Key Exporter Context . . . . . . . . . . . . . . . . . . 4 3.1.1. Public Key Encoding . . . . . . . . . . . . . . . . . 6 3.2. Key Exporter Output . . . . . . . . . . . . . . . . . . . 6 3.3. Signature Computation . . . . . . . . . . . . . . . . . . 7 4. Authentication Parameters . . . . . . . . . . . . . . . . . . 7 4.1. The k Parameter . . . . . . . . . . . . . . . . . . . . . 8 4.2. The a Parameter . . . . . . . . . . . . . . . . . . . . . 8 4.3. The p Parameter . . . . . . . . . . . . . . . . . . . . . 8 4.4. The s Parameter . . . . . . . . . . . . . . . . . . . . . 8 4.5. The v Parameter . . . . . . . . . . . . . . . . . . . . . 9 5. Example . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 6. Server Handling . . . . . . . . . . . . . . . . . . . . . . . 9 6.1. Frontend Handling . . . . . . . . . . . . . . . . . . . . 10 6.2. Communication between Frontend and Backend . . . . . . . 10 6.3. Backend Handling . . . . . . . . . . . . . . . . . . . . 11 6.4. Non-Probeable Server Handling . . . . . . . . . . . . . . 11 Schinazi, et al. Expires 23 March 2025 [Page 2] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 7. Requirements on TLS Usage . . . . . . . . . . . . . . . . . . 12 8. Security Considerations . . . . . . . . . . . . . . . . . . . 12 9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 13 9.1. HTTP Authentication Schemes Registry . . . . . . . . . . 13 9.2. TLS Keying Material Exporter Labels . . . . . . . . . . . 13 9.3. HTTP Field Name . . . . . . . . . . . . . . . . . . . . . 14 10. References . . . . . . . . . . . . . . . . . . . . . . . . . 14 10.1. Normative References . . . . . . . . . . . . . . . . . . 14 10.2. Informative References . . . . . . . . . . . . . . . . . 16 Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 16 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 17 1. Introduction HTTP authentication schemes (see Section 11 of [HTTP]) allow origins to restrict access for some resources to only authenticated requests. While these schemes commonly involve a challenge where the origin asks the client to provide authentication information, it is possible for clients to send such information unprompted. This is particularly useful in cases where an origin wants to offer a service or capability only to "those who know" while all others are given no indication the service or capability exists. Such designs rely on an externally-defined mechanism by which keys are distributed. For example, a company might offer remote employee access to company services directly via its website using their employee credentials, or offer access to limited special capabilities for specific employees, while making discovering (or probing for) such capabilities difficult. As another example, members of less well- defined communities might use more ephemeral keys to acquire access to geography- or capability-specific resources, as issued by an entity whose user base is larger than the available resources can support (by having that entity metering the availability of keys temporally or geographically). While digital-signature-based HTTP authentication schemes already exist (e.g., [HOBA]), they rely on the origin explicitly sending a fresh challenge to the client, to ensure that the signature input is fresh. That makes the origin probeable as it sends the challenge to unauthenticated clients. This document defines a new signature-based authentication scheme that is not probeable. 1.1. Conventions and Definitions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. Schinazi, et al. Expires 23 March 2025 [Page 3] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 This document uses the notation from Section 1.3 of [QUIC]. 2. The Concealed Authentication Scheme This document defines the "Concealed" HTTP authentication scheme. It uses asymmetric cryptography. Clients possess a key ID and a public/ private key pair, and origin servers maintain a mapping of authorized key IDs to associated public keys. The client uses a TLS keying material exporter to generate data to be signed (see Section 3) then sends the signature using the Authorization (or Proxy-Authorization) header field (see Section 11 of [HTTP]). The signature and additional information are exchanged using authentication parameters (see Section 4). Once the server receives these, it can check whether the signature validates against an entry in its database of known keys. The server can then use the validation result to influence its response to the client, for example by restricting access to certain resources. 3. Client Handling When a client wishes to use the Concealed HTTP authentication scheme with a request, it SHALL compute the authentication proof using a TLS keying material exporter with the following parameters: * the label is set to "EXPORTER-HTTP-Concealed-Authentication" * the context is set to the structure described in Section 3.1 * the exporter output length is set to 48 bytes (see Section 3.2) Note that TLS 1.3 keying material exporters are defined in Section 7.5 of [TLS], while TLS 1.2 keying material exporters are defined in [KEY-EXPORT]. 3.1. Key Exporter Context The TLS key exporter context is described in Figure 1, using the notation from Section 1.3 of [QUIC]: Schinazi, et al. Expires 23 March 2025 [Page 4] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 Signature Algorithm (16), Key ID Length (i), Key ID (..), Public Key Length (i), Public Key (..), Scheme Length (i), Scheme (..), Host Length (i), Host (..), Port (16), Realm Length (i), Realm (..), Figure 1: Key Exporter Context Format The key exporter context contains the following fields: Signature Algorithm: The signature scheme sent in the s Parameter (see Section 4.4). Key ID: The key ID sent in the k Parameter (see Section 4.1). Public Key: The public key used by the server to validate the signature provided by the client. Its encoding is described in Section 3.1.1. Scheme: The scheme for this request, encoded using the format of the scheme portion of a URI as defined in Section 3.1 of [URI]. Host: The host for this request, encoded using the format of the host portion of a URI as defined in Section 3.2.2 of [URI]. Port: The port for this request, encoded in network byte order. Note that the port is either included in the URI, or is the default port for the scheme in use; see Section 3.2.3 of [URI]. Realm: The realm of authentication that is sent in the realm authentication parameter (Section 11.5 of [HTTP]). If the realm authentication parameter is not present, this SHALL be empty. This document does not define a means for the origin to communicate a realm to the client. If a client is not configured to use a specific realm, it SHALL use an empty realm and SHALL NOT send the realm authentication parameter. The Signature Algorithm and Port fields are encoded as unsigned 16-bit integers in network byte order. The Key ID, Public Key, Scheme, Host, and Realm fields are length prefixed strings; they are preceded by a Length field that represents their length in bytes. Schinazi, et al. Expires 23 March 2025 [Page 5] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 These length fields are encoded using the variable-length integer encoding from Section 16 of [QUIC] and MUST be encoded in the minimum number of bytes necessary. 3.1.1. Public Key Encoding Both the "Public Key" field of the TLS key exporter context (see above) and the a Parameter (see Section 4.2) carry the same public key. The encoding of the public key is determined by the Signature Algorithm in use as follows: RSASSA-PSS algorithms: The public key is an RSAPublicKey structure [PKCS1] encoded in DER [X.690]. BER encodings which are not DER MUST be rejected. ECDSA algorithms: The public key is a UncompressedPointRepresentation structure defined in Section 4.2.8.2 of [TLS], using the curve specified by the SignatureScheme. EdDSA algorithms: The public key is the byte string encoding defined in [EdDSA]. This document does not define the public key encodings for other algorithms. In order for a SignatureScheme to be usable with the Concealed HTTP authentication scheme, its public key encoding needs to be defined in a corresponding document. 3.2. Key Exporter Output The key exporter output is 48 bytes long. Of those, the first 32 bytes are part of the input to the signature and the next 16 bytes are sent alongside the signature. This allows the recipient to confirm that the exporter produces the right values. This is described in Figure 2, using the notation from Section 1.3 of [QUIC]: Signature Input (256), Verification (128), Figure 2: Key Exporter Output Format The key exporter output contains the following fields: Signature Input: This is part of the data signed using the client's chosen asymmetric private key (see Section 3.3). Verification: The verification is transmitted to the server using the v Parameter (see Section 4.5). Schinazi, et al. Expires 23 March 2025 [Page 6] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 3.3. Signature Computation Once the Signature Input has been extracted from the key exporter output (see Section 3.2), it is prefixed with static data before being signed. The signature is computed over the concatenation of: * A string that consists of octet 32 (0x20) repeated 64 times * The context string "HTTP Concealed Authentication" * A single 0 byte which serves as a separator * The Signature Input extracted from the key exporter output (see Section 3.2) For example, if the Signature Input has all its 32 bytes set to 01, the content covered by the signature (in hexadecimal format) would be: 2020202020202020202020202020202020202020202020202020202020202020 2020202020202020202020202020202020202020202020202020202020202020 48545450205369676E61747572652041757468656E7469636174696F6E 00 0101010101010101010101010101010101010101010101010101010101010101 Figure 3: Example Content Covered by Signature The purpose of this static prefix is to mitigate issues that could arise if authentication asymmetric keys were accidentally reused across protocols (even though this is forbidden, see Section 8). This construction mirrors that of the TLS 1.3 CertificateVerify message defined in Section 4.4.3 of [TLS]. The resulting signature is then transmitted to the server using the p Parameter (see Section 4.3). 4. Authentication Parameters This specification defines the following authentication parameters. All of the byte sequences below are encoded using base64url (see Section 5 of [BASE64]) without quotes and without padding. In other words, the values of these byte-sequence authentication parameters MUST NOT include any characters other than ASCII letters, digits, dash and underscore. Schinazi, et al. Expires 23 March 2025 [Page 7] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 The integer below is encoded without a minus and without leading zeroes. In other words, the value of this integer authentication parameter MUST NOT include any characters other than digits, and MUST NOT start with a zero unless the full value is "0". Using the syntax from [ABNF]: concealed-byte-sequence-param-value = *( ALPHA / DIGIT / "-" / "_" ) concealed-integer-param-value = %x31-39 1*4( DIGIT ) / "0" Figure 4: Authentication Parameter Value ABNF 4.1. The k Parameter The REQUIRED "k" (key ID) Parameter is a byte sequence that identifies which key the client wishes to use to authenticate. This is used by the backend to point to an entry in a server-side database of known keys, see Section 6.3. 4.2. The a Parameter The REQUIRED "a" (public key) Parameter is a byte sequence that specifies the public key used by the server to validate the signature provided by the client. This avoids key confusion issues (see [SEEMS-LEGIT]). The encoding of the public key is described in Section 3.1.1. 4.3. The p Parameter The REQUIRED "p" (proof) Parameter is a byte sequence that specifies the proof that the client provides to attest to possessing the credential that matches its key ID. 4.4. The s Parameter The REQUIRED "s" (signature) Parameter is an integer that specifies the signature scheme used to compute the proof transmitted in the p Parameter. Its value is an integer between 0 and 65535 inclusive from the IANA "TLS SignatureScheme" registry maintained at . Schinazi, et al. Expires 23 March 2025 [Page 8] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 4.5. The v Parameter The REQUIRED "v" (verification) Parameter is a byte sequence that specifies the verification that the client provides to attest to possessing the key exporter output (see Section 3.2 for details). This avoids issues with signature schemes where certain keys can generate signatures that are valid for multiple inputs (see [SEEMS-LEGIT]). 5. Example For example, the key ID "basement" authenticating using Ed25519 [ED25519] could produce the following header field: NOTE: '\' line wrapping per RFC 8792 Authorization: Concealed \ k=YmFzZW1lbnQ, \ a=VGhpcyBpcyBh-HB1YmxpYyBrZXkgaW4gdXNl_GhlcmU, \ s=2055, \ v=dmVyaWZpY2F0aW9u_zE2Qg, \ p=QzpcV2luZG93c_xTeXN0ZW0zMlxkcml2ZXJz-ENyb3dkU\ 3RyaWtlXEMtMDAwMDAwMDAyOTEtMD-wMC0w_DAwLnN5cw Figure 5: Example Header Field 6. Server Handling In this section, we subdivide the server role in two: * the "frontend" runs in the HTTP server that terminates the TLS or QUIC connection created by the client. * the "backend" runs in the HTTP server that has access to the database of accepted key identifiers and public keys. In most deployments, we expect the frontend and backend roles to both be implemented in a single HTTP origin server (as defined in Section 3.6 of [HTTP]). However, these roles can be split such that the frontend is an HTTP gateway (as defined in Section 3.7 of [HTTP]) and the backend is an HTTP origin server. Schinazi, et al. Expires 23 March 2025 [Page 9] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 6.1. Frontend Handling If a frontend is configured to check the Concealed authentication scheme, it will parse the Authorization (or Proxy-Authorization) header field. If the authentication scheme is set to "Concealed", the frontend MUST validate that all the required authentication parameters are present and can be parsed correctly as defined in Section 4. If any parameter is missing or fails to parse, the frontend MUST ignore the entire Authorization (or Proxy- Authorization) header field. The frontend then uses the data from these authentication parameters to compute the key exporter output, as defined in Section 3.2. The frontend then shares the header field and the key exporter output with the backend. 6.2. Communication between Frontend and Backend If the frontend and backend roles are implemented in the same machine, this can be handled by a simple function call. If the roles are split between two separate HTTP servers, then the backend won't be able to directly access the TLS keying material exporter from the TLS connection between the client and frontend, so the frontend needs to explictly send it. This document defines the "Concealed-Auth-Export" request header field for this purpose. The Concealed-Auth-Export header field's value is a Structured Field Byte Sequence (see Section 3.3.5 of [STRUCTURED-FIELDS]) that contains the 48-byte key exporter output (see Section 3.2), without any parameters. Note that Structured Field Byte Sequences are encoded using the non-URL-safe variant of base64. For example: NOTE: '\' line wrapping per RFC 8792 Concealed-Auth-Export: :VGhpc+BleGFtcGxlIFRMU/BleHBvcn\ Rlc+BvdXRwdXQ/aXMgNDggYnl0ZXMgI/+h: Figure 6: Example Concealed-Auth-Export Header Field The frontend SHALL forward the HTTP request to the backend, including the original unmodified Authorization (or Proxy-Authorization) header field and the newly added Concealed-Auth-Export header field. Note that, since the security of this mechanism requires the key exporter output to be correct, backends need to trust frontends to send it truthfully. This trust relationship is common because the frontend already needs access to the TLS certificate private key in order to respond to requests. HTTP servers that parse the Concealed- Schinazi, et al. Expires 23 March 2025 [Page 10] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 Auth-Export header field MUST ignore it unless they have already established that they trust the sender. Similarly, frontends that send the Concealed-Auth-Export header field MUST ensure that they do not forward any Concealed-Auth-Export header field received from the client. 6.3. Backend Handling Once the backend receives the Authorization (or Proxy-Authorization) header field and the key exporter output, it looks up the key ID in its database of public keys. The backend SHALL then perform the following checks: * validate that all the required authentication parameters are present and can be parsed correctly as defined in Section 4 * ensure the key ID is present in the backend's database and maps to a corresponding public key * validate that the public key from the database is equal to the one in the Authorization (or Proxy-Authorization) header field * validate that the verification field from the Authorization (or Proxy-Authorization) header field matches the one extracted from the key exporter output * verify the cryptographic signature as defined in Section 3.3 If all of these checks succeed, the backend can consider the request to be properly authenticated, and can reply accordingly (the backend can also forward the request to another HTTP server). If any of the above checks fail, the backend MUST treat it as if the Authorization (or Proxy-Authorization) header field was missing. 6.4. Non-Probeable Server Handling Servers that wish to introduce resources whose existence cannot be probed need to ensure that they do not reveal any information about those resources to unauthenticated clients. In particular, such servers MUST respond to authentication failures with the exact same response that they would have used for non-existent resources. For example, this can mean using HTTP status code 404 (Not Found) instead of 401 (Unauthorized). The authentication checks described above can take time to compute, and an attacker could detect use of this mechanism if that time is observable by comparing the timing of a request for a known non- Schinazi, et al. Expires 23 March 2025 [Page 11] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 existent resource to the timing of a request for a potentially authenticated resource. Servers can mitigate this observability by slightly delaying responses to some non-existent resources such that the timing of the authentication verification is not observable. This delay needs to be carefully considered to avoid having the delay itself leak the fact that this origin uses this mechanism at all. Non-probeable resources also need to be non-discoverable for unauthenticated users. For example, if a server operator wishes to hide an authenticated resource by pretending it does not exist to unauthenticated users, then the server operator needs to ensure there are no unauthenticated pages with links to that resource, and no other out-of-band ways for unauthenticated users to discover this resource. 7. Requirements on TLS Usage This authentication scheme is only defined for uses of HTTP with TLS [TLS]. This includes any use of HTTP over TLS as typically used for HTTP/2 [HTTP/2], or HTTP/3 [HTTP/3] where the transport protocol uses TLS as its authentication and key exchange mechanism [QUIC-TLS]. Because the TLS keying material exporter is only secure for authentication when it is uniquely bound to the TLS session [RFC7627], the Concealed authentication scheme requires either one of the following properties: * The TLS version in use is greater or equal to 1.3 [TLS]. * The TLS version in use is 1.2 and the Extended Master Secret extension [RFC7627] has been negotiated. Clients MUST NOT use the Concealed authentication scheme on connections that do not meet one of the two properties above. If a server receives a request that uses this authentication scheme on a connection that meets neither of the above properties, the server MUST treat the request as if the authentication were not present. 8. Security Considerations The Concealed HTTP authentication scheme allows a client to authenticate to an origin server while guaranteeing freshness and without the need for the server to transmit a nonce to the client. This allows the server to accept authenticated clients without revealing that it supports or expects authentication for some resources. It also allows authentication without the client leaking the presence of authentication to observers due to clear-text TLS Client Hello extensions. Schinazi, et al. Expires 23 March 2025 [Page 12] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 Since the freshness described above is provided by a TLS key exporter, it can be as old as the underlying TLS connection. Servers can require better freshness by forcing clients to create new connections using mechanisms such as the GOAWAY frame (see Section 5.2 of [HTTP/3]). The authentication proofs described in this document are not bound to individual HTTP requests; if the key is used for authentication proofs on multiple requests on the same connection, they will all be identical. This allows for better compression when sending over the wire, but implies that client implementations that multiplex different security contexts over a single HTTP connection need to ensure that those contexts cannot read each other's header fields. Otherwise, one context would be able to replay the Authorization header field of another. This constraint is met by modern Web browsers. If an attacker were to compromise the browser such that it could access another context's memory, the attacker might also be able to access the corresponding key, so binding authentication to requests would not provide much benefit in practice. Authentication asymmetric keys used for the Concealed HTTP authentication scheme MUST NOT be reused in other protocols. Even though we attempt to mitigate these issues by adding a static prefix to the signed data (see Section 3.3), reusing keys could undermine the security guarantees of the authentication. Origins offering this scheme can link requests that use the same key. However, requests are not linkable across origins if the keys used are specific to the individual origins using this scheme. 9. IANA Considerations 9.1. HTTP Authentication Schemes Registry This document, if approved, requests IANA to register the following entry in the "HTTP Authentication Schemes" Registry maintained at : Authentication Scheme Name: Concealed Reference: This document Notes: None 9.2. TLS Keying Material Exporter Labels This document, if approved, requests IANA to register the following entry in the "TLS Exporter Labels" registry maintained at : Schinazi, et al. Expires 23 March 2025 [Page 13] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 Value: EXPORTER-HTTP-Concealed-Authentication DTLS-OK: N Recommended: Y Reference: This document 9.3. HTTP Field Name This document, if approved, requests IANA to register the following entry in the "Hypertext Transfer Protocol (HTTP) Field Name" registry maintained at : Field Name: Concealed-Auth-Export Status: permanent Structured Type: Item Reference: This document Comments: None 10. References 10.1. Normative References [ABNF] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, DOI 10.17487/RFC5234, January 2008, . [BASE64] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006, . [EdDSA] Josefsson, S. and I. Liusvaara, "Edwards-Curve Digital Signature Algorithm (EdDSA)", RFC 8032, DOI 10.17487/RFC8032, January 2017, . [HTTP] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP Semantics", STD 97, RFC 9110, DOI 10.17487/RFC9110, June 2022, . [KEY-EXPORT] Rescorla, E., "Keying Material Exporters for Transport Layer Security (TLS)", RFC 5705, DOI 10.17487/RFC5705, March 2010, . Schinazi, et al. Expires 23 March 2025 [Page 14] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 [PKCS1] Moriarty, K., Ed., Kaliski, B., Jonsson, J., and A. Rusch, "PKCS #1: RSA Cryptography Specifications Version 2.2", RFC 8017, DOI 10.17487/RFC8017, November 2016, . [QUIC] Iyengar, J., Ed. and M. Thomson, Ed., "QUIC: A UDP-Based Multiplexed and Secure Transport", RFC 9000, DOI 10.17487/RFC9000, May 2021, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC7627] Bhargavan, K., Ed., Delignat-Lavaud, A., Pironti, A., Langley, A., and M. Ray, "Transport Layer Security (TLS) Session Hash and Extended Master Secret Extension", RFC 7627, DOI 10.17487/RFC7627, September 2015, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8792] Watsen, K., Auerswald, E., Farrel, A., and Q. Wu, "Handling Long Lines in Content of Internet-Drafts and RFCs", RFC 8792, DOI 10.17487/RFC8792, June 2020, . [STRUCTURED-FIELDS] Nottingham, M. and P. Kamp, "Structured Field Values for HTTP", RFC 8941, DOI 10.17487/RFC8941, February 2021, . [TLS] Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018, . [URI] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, . [X.690] ITU-T, "Information technology - ASN.1 encoding Rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)", ISO/IEC 8824-1:2021 , February 2021. Schinazi, et al. Expires 23 March 2025 [Page 15] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 10.2. Informative References [ED25519] Josefsson, S. and J. Schaad, "Algorithm Identifiers for Ed25519, Ed448, X25519, and X448 for Use in the Internet X.509 Public Key Infrastructure", RFC 8410, DOI 10.17487/RFC8410, August 2018, . [HOBA] Farrell, S., Hoffman, P., and M. Thomas, "HTTP Origin- Bound Authentication (HOBA)", RFC 7486, DOI 10.17487/RFC7486, March 2015, . [HTTP/2] Thomson, M., Ed. and C. Benfield, Ed., "HTTP/2", RFC 9113, DOI 10.17487/RFC9113, June 2022, . [HTTP/3] Bishop, M., Ed., "HTTP/3", RFC 9114, DOI 10.17487/RFC9114, June 2022, . [MASQUE-ORIGINAL] Schinazi, D., "The MASQUE Protocol", Work in Progress, Internet-Draft, draft-schinazi-masque-00, 28 February 2019, . [QUIC-TLS] Thomson, M., Ed. and S. Turner, Ed., "Using TLS to Secure QUIC", RFC 9001, DOI 10.17487/RFC9001, May 2021, . [SEEMS-LEGIT] Jackson, D., Cremers, C., Cohn-Gordon, K., and R. Sasse, "Seems Legit: Automated Analysis of Subtle Attacks on Protocols That Use Signatures", CCS '19: Proceedings of the 2019 ACM SIGSAC Conference on Computer and Communications Security, pp. 2165–2180, DOI 10.1145/3319535.3339813, 2019, . Acknowledgments The authors would like to thank many members of the IETF community, as this document is the fruit of many hallway conversations. In particular, the authors would like to thank David Benjamin, Reese Enghardt, Nick Harper, Dennis Jackson, Ilari Liusvaara, François Michel, Lucas Pardue, Justin Richer, Ben Schwartz, Martin Thomson, and Chris A. Wood for their reviews and contributions. The mechanism described in this document was originally part of the first iteration Schinazi, et al. Expires 23 March 2025 [Page 16] Internet-Draft The Concealed HTTP Authentication Scheme September 2024 of MASQUE [MASQUE-ORIGINAL]. Authors' Addresses David Schinazi Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 United States of America Email: dschinazi.ietf@gmail.com David M. Oliver Guardian Project Email: david@guardianproject.info URI: https://guardianproject.info Jonathan Hoyland Cloudflare Inc. Email: jonathan.hoyland@gmail.com Schinazi, et al. Expires 23 March 2025 [Page 17]