patch-2.2.15 linux/include/linux/cpia.h

• Lines: 221
• Date: Fri Apr 21 23:14:09 2000
• Orig file: v2.2.14/include/linux/cpia.h
• Orig date: Thu Jan 1 01:00:00 1970

diff -u --new-file --recursive --exclude-from ../../exclude v2.2.14/include/linux/cpia.h linux/include/linux/cpia.h
@@ -0,0 +1,220 @@
+#ifndef cpia_h
+#define cpia_h
+
+/*
+ * CPiA Parallel Port Video4Linux driver
+ *
+ * Supports CPiA based parallel port Video Camera's.
+ *
+ * (C) Copyright 1999 Bas Huisman,
+ *                    Peter Pregler,
+ *                    Scott J. Bertin,
+ *                    VLSI Vision Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define CPIA_MAJ_VER	0
+#define CPIA_MIN_VER    5
+#define CPIA_PATCH_VER	0
+
+#define CPIA_PP_MAJ_VER       0
+#define CPIA_PP_MIN_VER       5
+#define CPIA_PP_PATCH_VER     0
+
+#define CPIA_MAX_FRAME_SIZE_UNALIGNED	(352 * 288 * 4)   /* CIF at RGB32 */
+#define CPIA_MAX_FRAME_SIZE	((CPIA_MAX_FRAME_SIZE_UNALIGNED + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)) /* align above to PAGE_SIZE */
+
+#ifdef __KERNEL__
+
+#include <asm/uaccess.h>
+
+struct cpia_camera_ops
+{
+	/* open sets privdata to point to structure for this camera.
+         * Returns negative value on error, otherwise 0.
+	 */
+	int (*open)(int camnr, void **privdata);
+	
+	/* Registers callback function cb to be called with cbdata
+	 * when an image is ready.  If cb is NULL, only single image grabs
+	 * should be used.  cb should immediately call streamRead to read
+	 * the data or data may be lost. Returns negative value on error,
+	 * otherwise 0.
+	 */
+	int (*registerCallback)(void *privdata, void (*cb)(void *cbdata),
+	                        void *cbdata);
+	
+	/* transferCmd sends commands to the camera.  command MUST point to
+	 * an  8 byte buffer in kernel space. data can be NULL if no extra
+	 * data is needed.  The size of the data is given by the last 2
+	 * bytes of comand.  data must also point to memory in kernel space.
+	 * Returns negative value on error, otherwise 0.
+	 */
+	int (*transferCmd)(void *privdata, u8 *command, u8 *data);
+
+	/* streamStart initiates stream capture mode.
+	 * Returns negative value on error, otherwise 0.
+	 */
+	int (*streamStart)(void *privdata);
+	
+	/* streamStop terminates stream capture mode.
+	 * Returns negative value on error, otherwise 0.
+	 */
+	int (*streamStop)(void *privdata);
+        
+	/* streamRead reads a frame from the camera.  buffer points to a
+         * buffer large enough to hold a complete frame in kernel space.
+         * noblock indicates if this should be a non blocking read.
+	 * Returns the number of bytes read, or negative value on error.
+         */
+	int (*streamRead)(void *privdata, u8 *buffer, int noblock);
+	
+	/* close disables the device until open() is called again.
+	 * Returns negative value on error, otherwise 0.
+	 */
+	int (*close)(void *privdata);
+};
+
+/* cpia_register_camera is called by low level driver for each camera.
+ * A unique camera number is returned, or a negative value on error */
+int cpia_register_camera(struct cpia_camera_ops *ops);
+
+/* cpia_unregister_camera is called by low level driver when a camera
+ * is removed.  This must not fail. */
+void cpia_unregister_camera(int camnr);
+
+#define CPIA_MAXCAMS		4
+
+/* raw CIF + 64 byte header + (2 bytes line_length + EOL) per line + 4*EOI +
+ * one byte 16bit DMA alignment
+ */
+#define CPIA_MAX_IMAGE_SIZE ((352*288*2)+64+(288*3)+5)
+
+/* constant value's */
+#define MAGIC_0		0x19
+#define MAGIC_1		0x68
+#define DATA_IN		0xC0
+#define DATA_OUT	0x40
+#define VIDEOSIZE_QCIF	0	/* 176x144 */
+#define VIDEOSIZE_CIF	1	/* 352x288 */
+#define VIDEOSIZE_SIF	2	/* 320x240 */
+#define VIDEOSIZE_QSIF	3	/* 160x120 */
+#define VIDEOSIZE_48_48		4 /* where no one has gone before, iconsize! */
+#define VIDEOSIZE_64_48		5
+#define VIDEOSIZE_128_96	6
+#define VIDEOSIZE_160_120	VIDEOSIZE_QSIF
+#define VIDEOSIZE_176_144	VIDEOSIZE_QCIF
+#define VIDEOSIZE_192_144	7
+#define VIDEOSIZE_224_168	8
+#define VIDEOSIZE_256_192	9
+#define VIDEOSIZE_288_216	10
+#define VIDEOSIZE_320_240	VIDEOSIZE_SIF
+#define VIDEOSIZE_352_288	VIDEOSIZE_CIF
+#define SUBSAMPLE_420	0
+#define SUBSAMPLE_422	1
+#define YUVORDER_YUYV	0
+#define YUVORDER_UYVY	1
+#define NOT_COMPRESSED	0
+#define COMPRESSED	1
+#define NO_DECIMATION	0
+#define DECIMATION_ENAB	1
+#define EOI		0xff	/* End Of Image */
+#define EOL		0xfd	/* End Of Line */
+
+/* Image grab modes */
+#define CPIA_GRAB_SINGLE	0
+#define CPIA_GRAB_CONTINUOUS	1
+
+/* Compression parameters */
+#define CPIA_COMPRESSION_NONE	0
+#define CPIA_COMPRESSION_AUTO	1
+#define CPIA_COMPRESSION_MANUAL	2
+#define CPIA_COMPRESSION_TARGET_QUALITY         0
+#define CPIA_COMPRESSION_TARGET_FRAMERATE       1
+
+/* Return offsets for GetCameraState */
+#define SYSTEMSTATE	0
+#define GRABSTATE	1
+#define STREAMSTATE	2
+#define FATALERROR	3
+#define CMDERROR	4
+#define DEBUGFLAGS	5
+#define VPSTATUS	6
+#define ERRORCODE	7
+
+/* SystemState */
+#define UNINITIALISED_STATE	0
+#define PASS_THROUGH_STATE	1
+#define LO_POWER_STATE		2
+#define HI_POWER_STATE		3
+#define WARM_BOOT_STATE		4
+
+/* GrabState */
+#define GRAB_IDLE		0
+#define GRAB_ACTIVE		1
+#define GRAB_DONE		2
+
+/* StreamState */
+#define STREAM_NOT_READY	0
+#define STREAM_READY		1
+#define STREAM_OPEN		2
+#define STREAM_PAUSED		3
+#define STREAM_FINISHED		4
+
+/* Fatal Error, CmdError, and DebugFlags */
+#define CPIA_FLAG	  1
+#define SYSTEM_FLAG	  2
+#define INT_CTRL_FLAG	  4
+#define PROCESS_FLAG	  8
+#define COM_FLAG	 16
+#define VP_CTRL_FLAG	 32
+#define CAPTURE_FLAG	 64
+#define DEBUG_FLAG	128
+
+/* VPStatus */
+#define VP_STATE_OK			0x00
+
+#define VP_STATE_FAILED_VIDEOINIT	0x01
+#define VP_STATE_FAILED_AECACBINIT	0x02
+#define VP_STATE_AEC_MAX		0x04
+#define VP_STATE_ACB_BMAX		0x08
+
+#define VP_STATE_ACB_RMIN		0x10
+#define VP_STATE_ACB_GMIN		0x20
+#define VP_STATE_ACB_RMAX		0x40
+#define VP_STATE_ACB_GMAX		0x80
+
+/* ErrorCode */
+#define ERROR_FLICKER_BELOW_MIN_EXP     0x01 /*flicker exposure got below minimum exposure */
+
+#define ALOG(lineno,fmt,args...) printk(fmt,lineno,##args)
+#define LOG(fmt,args...) ALOG((__LINE__),KERN_INFO __FILE__":"__FUNCTION__"(%d):"fmt,##args)
+
+#ifdef _CPIA_DEBUG_
+#define ADBG(lineno,fmt,args...) printk(fmt, jiffies, lineno, ##args)
+#define DBG(fmt,args...) ADBG((__LINE__),KERN_DEBUG __FILE__"(%ld):"__FUNCTION__"(%d):"fmt,##args)
+#else
+#define DBG(fmn,args...) {}
+#endif
+
+#define DEB_BYTE(p)\
+  DBG("%1d %1d %1d %1d %1d %1d %1d %1d \n",\
+      (p)&0x80?1:0, (p)&0x40?1:0, (p)&0x20?1:0, (p)&0x10?1:0,\
+        (p)&0x08?1:0, (p)&0x04?1:0, (p)&0x02?1:0, (p)&0x01?1:0);
+
+#endif /* __KERNEL__ */
+
+#endif /* cpia_h */