patch-2.4.27 linux-2.4.27/drivers/net/e1000/e1000_param.c

• Lines: 334
• Date: 2004-08-07 16:26:05.109365473 -0700
• Orig file: linux-2.4.26/drivers/net/e1000/e1000_param.c
• Orig date: 2004-04-14 06:05:30.000000000 -0700

diff -urN linux-2.4.26/drivers/net/e1000/e1000_param.c linux-2.4.27/drivers/net/e1000/e1000_param.c
@@ -107,7 +107,7 @@
 
 /* Auto-negotiation Advertisement Override
  *
- * Valid Range: 0x01-0x0F, 0x20-0x2F
+ * Valid Range: 0x01-0x0F, 0x20-0x2F (copper); 0x20 (fiber)
  *
  * The AutoNeg value is a bit mask describing which speed and duplex
  * combinations should be advertised during auto-negotiation.
@@ -117,7 +117,7 @@
  * Speed (Mbps)  N/A   N/A   1000   N/A    100   100   10     10
  * Duplex                    Full          Full  Half  Full   Half
  *
- * Default Value: 0x2F
+ * Default Value: 0x2F (copper); 0x20 (fiber)
  */
 
 E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
@@ -234,7 +234,8 @@
 };
 
 static int __devinit
-e1000_validate_option(int *value, struct e1000_option *opt)
+e1000_validate_option(int *value, struct e1000_option *opt,
+	struct e1000_adapter *adapter)
 {
 	if(*value == OPTION_UNSET) {
 		*value = opt->def;
@@ -245,16 +246,17 @@
 	case enable_option:
 		switch (*value) {
 		case OPTION_ENABLED:
-			printk(KERN_INFO "%s Enabled\n", opt->name);
+			DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name);
 			return 0;
 		case OPTION_DISABLED:
-			printk(KERN_INFO "%s Disabled\n", opt->name);
+			DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name);
 			return 0;
 		}
 		break;
 	case range_option:
 		if(*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
-			printk(KERN_INFO "%s set to %i\n", opt->name, *value);
+			DPRINTK(PROBE, INFO,
+				"%s set to %i\n", opt->name, *value);
 			return 0;
 		}
 		break;
@@ -266,7 +268,7 @@
 			ent = &opt->arg.l.p[i];
 			if(*value == ent->i) {
 				if(ent->str[0] != '\0')
-					printk(KERN_INFO "%s\n", ent->str);
+					DPRINTK(PROBE, INFO, "%s\n", ent->str);
 				return 0;
 			}
 		}
@@ -276,7 +278,7 @@
 		BUG();
 	}
 
-	printk(KERN_INFO "Invalid %s specified (%i) %s\n",
+	DPRINTK(PROBE, INFO, "Invalid %s specified (%i) %s\n",
 	       opt->name, *value, opt->err);
 	*value = opt->def;
 	return -1;
@@ -300,9 +302,9 @@
 {
 	int bd = adapter->bd_number;
 	if(bd >= E1000_MAX_NIC) {
-		printk(KERN_NOTICE
+		DPRINTK(PROBE, NOTICE,
 		       "Warning: no configuration for board #%i\n", bd);
-		printk(KERN_NOTICE "Using defaults for all values\n");
+		DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
 		bd = E1000_MAX_NIC;
 	}
 
@@ -321,7 +323,7 @@
 			E1000_MAX_TXD : E1000_MAX_82544_TXD;
 
 		tx_ring->count = TxDescriptors[bd];
-		e1000_validate_option(&tx_ring->count, &opt);
+		e1000_validate_option(&tx_ring->count, &opt, adapter);
 		E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
 	}
 	{ /* Receive Descriptor Count */
@@ -339,7 +341,7 @@
 			E1000_MAX_82544_RXD;
 
 		rx_ring->count = RxDescriptors[bd];
-		e1000_validate_option(&rx_ring->count, &opt);
+		e1000_validate_option(&rx_ring->count, &opt, adapter);
 		E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
 	}
 	{ /* Checksum Offload Enable/Disable */
@@ -351,7 +353,7 @@
 		};
 
 		int rx_csum = XsumRX[bd];
-		e1000_validate_option(&rx_csum, &opt);
+		e1000_validate_option(&rx_csum, &opt, adapter);
 		adapter->rx_csum = rx_csum;
 	}
 	{ /* Flow Control */
@@ -373,7 +375,7 @@
 		};
 
 		int fc = FlowControl[bd];
-		e1000_validate_option(&fc, &opt);
+		e1000_validate_option(&fc, &opt, adapter);
 		adapter->hw.fc = adapter->hw.original_fc = fc;
 	}
 	{ /* Transmit Interrupt Delay */
@@ -387,7 +389,7 @@
 		};
 
 		adapter->tx_int_delay = TxIntDelay[bd];
-		e1000_validate_option(&adapter->tx_int_delay, &opt);
+		e1000_validate_option(&adapter->tx_int_delay, &opt, adapter);
 	}
 	{ /* Transmit Absolute Interrupt Delay */
 		struct e1000_option opt = {
@@ -400,7 +402,7 @@
 		};
 
 		adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
-		e1000_validate_option(&adapter->tx_abs_int_delay, &opt);
+		e1000_validate_option(&adapter->tx_abs_int_delay, &opt, adapter);
 	}
 	{ /* Receive Interrupt Delay */
 		struct e1000_option opt = {
@@ -413,7 +415,7 @@
 		};
 
 		adapter->rx_int_delay = RxIntDelay[bd];
-		e1000_validate_option(&adapter->rx_int_delay, &opt);
+		e1000_validate_option(&adapter->rx_int_delay, &opt, adapter);
 	}
 	{ /* Receive Absolute Interrupt Delay */
 		struct e1000_option opt = {
@@ -426,7 +428,7 @@
 		};
 
 		adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
-		e1000_validate_option(&adapter->rx_abs_int_delay, &opt);
+		e1000_validate_option(&adapter->rx_abs_int_delay, &opt, adapter);
 	}
 	{ /* Interrupt Throttling Rate */
 		struct e1000_option opt = {
@@ -444,13 +446,14 @@
 			adapter->itr = 1;
 			break;
 		case 0:
-			printk(KERN_INFO "%s turned off\n", opt.name);
+			DPRINTK(PROBE, INFO, "%s turned off\n", opt.name);
 			break;
 		case 1:
-			printk(KERN_INFO "%s set to dynamic mode\n", opt.name);
+			DPRINTK(PROBE, INFO,
+				"%s set to dynamic mode\n", opt.name);
 			break;
 		default:
-			e1000_validate_option(&adapter->itr, &opt);
+			e1000_validate_option(&adapter->itr, &opt, adapter);
 			break;
 		}
 	}
@@ -482,15 +485,15 @@
 	bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
 
 	if((Speed[bd] != OPTION_UNSET)) {
-		printk(KERN_INFO "Speed not valid for fiber adapters, "
+		DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
 		       "parameter ignored\n");
 	}
 	if((Duplex[bd] != OPTION_UNSET)) {
-		printk(KERN_INFO "Duplex not valid for fiber adapters, "
+		DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
 		       "parameter ignored\n");
 	}
 	if((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) {
-		printk(KERN_INFO "AutoNeg other than Full/1000 is "
+		DPRINTK(PROBE, INFO, "AutoNeg other than Full/1000 is "
 		       "not valid for fiber adapters, parameter ignored\n");
 	}
 }
@@ -525,7 +528,7 @@
 		};
 
 		speed = Speed[bd];
-		e1000_validate_option(&speed, &opt);
+		e1000_validate_option(&speed, &opt, adapter);
 	}
 	{ /* Duplex */
 		struct e1000_opt_list dplx_list[] = {{           0, "" },
@@ -542,11 +545,11 @@
 		};
 
 		dplx = Duplex[bd];
-		e1000_validate_option(&dplx, &opt);
+		e1000_validate_option(&dplx, &opt, adapter);
 	}
 
 	if(AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) {
-		printk(KERN_INFO
+		DPRINTK(PROBE, INFO,
 		       "AutoNeg specified along with Speed or Duplex, "
 		       "parameter ignored\n");
 		adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
@@ -595,7 +598,7 @@
 		};
 
 		int an = AutoNeg[bd];
-		e1000_validate_option(&an, &opt);
+		e1000_validate_option(&an, &opt, adapter);
 		adapter->hw.autoneg_advertised = an;
 	}
 
@@ -603,78 +606,85 @@
 	case 0:
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		if(Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET)
-			printk(KERN_INFO
+			DPRINTK(PROBE, INFO,
 			       "Speed and duplex autonegotiation enabled\n");
 		break;
 	case HALF_DUPLEX:
-		printk(KERN_INFO "Half Duplex specified without Speed\n");
-		printk(KERN_INFO "Using Autonegotiation at Half Duplex only\n");
+		DPRINTK(PROBE, INFO, "Half Duplex specified without Speed\n");
+		DPRINTK(PROBE, INFO,
+			"Using Autonegotiation at Half Duplex only\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
 		                                 ADVERTISE_100_HALF;
 		break;
 	case FULL_DUPLEX:
-		printk(KERN_INFO "Full Duplex specified without Speed\n");
-		printk(KERN_INFO "Using Autonegotiation at Full Duplex only\n");
+		DPRINTK(PROBE, INFO, "Full Duplex specified without Speed\n");
+		DPRINTK(PROBE, INFO,
+			"Using Autonegotiation at Full Duplex only\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
 		                                 ADVERTISE_100_FULL |
 		                                 ADVERTISE_1000_FULL;
 		break;
 	case SPEED_10:
-		printk(KERN_INFO "10 Mbps Speed specified without Duplex\n");
-		printk(KERN_INFO "Using Autonegotiation at 10 Mbps only\n");
+		DPRINTK(PROBE, INFO,
+			"10 Mbps Speed specified without Duplex\n");
+		DPRINTK(PROBE, INFO, "Using Autonegotiation at 10 Mbps only\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
 		                                 ADVERTISE_10_FULL;
 		break;
 	case SPEED_10 + HALF_DUPLEX:
-		printk(KERN_INFO "Forcing to 10 Mbps Half Duplex\n");
+		DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Half Duplex\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 0;
 		adapter->hw.forced_speed_duplex = e1000_10_half;
 		adapter->hw.autoneg_advertised = 0;
 		break;
 	case SPEED_10 + FULL_DUPLEX:
-		printk(KERN_INFO "Forcing to 10 Mbps Full Duplex\n");
+		DPRINTK(PROBE, INFO, "Forcing to 10 Mbps Full Duplex\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 0;
 		adapter->hw.forced_speed_duplex = e1000_10_full;
 		adapter->hw.autoneg_advertised = 0;
 		break;
 	case SPEED_100:
-		printk(KERN_INFO "100 Mbps Speed specified without Duplex\n");
-		printk(KERN_INFO "Using Autonegotiation at 100 Mbps only\n");
+		DPRINTK(PROBE, INFO,
+			"100 Mbps Speed specified without Duplex\n");
+		DPRINTK(PROBE, INFO,
+			"Using Autonegotiation at 100 Mbps only\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
 		                                 ADVERTISE_100_FULL;
 		break;
 	case SPEED_100 + HALF_DUPLEX:
-		printk(KERN_INFO "Forcing to 100 Mbps Half Duplex\n");
+		DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Half Duplex\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 0;
 		adapter->hw.forced_speed_duplex = e1000_100_half;
 		adapter->hw.autoneg_advertised = 0;
 		break;
 	case SPEED_100 + FULL_DUPLEX:
-		printk(KERN_INFO "Forcing to 100 Mbps Full Duplex\n");
+		DPRINTK(PROBE, INFO, "Forcing to 100 Mbps Full Duplex\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 0;
 		adapter->hw.forced_speed_duplex = e1000_100_full;
 		adapter->hw.autoneg_advertised = 0;
 		break;
 	case SPEED_1000:
-		printk(KERN_INFO "1000 Mbps Speed specified without Duplex\n");
-		printk(KERN_INFO
+		DPRINTK(PROBE, INFO,
+			"1000 Mbps Speed specified without Duplex\n");
+		DPRINTK(PROBE, INFO,
 		       "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
 		break;
 	case SPEED_1000 + HALF_DUPLEX:
-		printk(KERN_INFO "Half Duplex is not supported at 1000 Mbps\n");
-		printk(KERN_INFO
+		DPRINTK(PROBE, INFO,
+			"Half Duplex is not supported at 1000 Mbps\n");
+		DPRINTK(PROBE, INFO,
 		       "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
 		break;
 	case SPEED_1000 + FULL_DUPLEX:
-		printk(KERN_INFO
+		DPRINTK(PROBE, INFO,
 		       "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
@@ -685,7 +695,8 @@
 
 	/* Speed, AutoNeg and MDI/MDI-X must all play nice */
 	if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
-		printk(KERN_INFO "Speed, AutoNeg and MDI-X specifications are "
+		DPRINTK(PROBE, INFO,
+		       "Speed, AutoNeg and MDI-X specifications are "
 		       "incompatible. Setting MDI-X to a compatible value.\n");
 	}
 }